new cases in 9300..need help bro i'm very confused

my new case is my large lcd just blink "nokia" only.coudn't in to menu or see the hands.. if i on the power, large lcd become dead.. i was change the ic flash n i'm very sure the ic flash coud in perfectly.. i tried to flash n erase file before that. n the result is the same.. this my result file i was copied..can i get the solution please.. thanks before..sory if my english is very bad :D

MCU: C:\Program Files\Nokia\Phoenix\products\RAE-6\RAE6_5227.5501
Booting phone...
MCU ID: 0x2142
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.3D.00 -> Revision: 0007
Boot size is 0x0958
Boot is ready...
FLASH ID0: 00EC22FA -> ST Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Flash ID is 0xFA22EC00
Flash loader is C:\Program Files\ODEON\JAF\Flash\m_amd.fia
Loader version: 04.3D.00 -> Revision: 0007
Loader size is 0x7B98; Loader chk: 1e
Loader is ready...
P-key nokia module version 01.00
MSID: 840E948F433EF7D27CAFC5DA16
MSID decoded: 3E4EBAE9005DFE68A8000000
FAID: CCD181515E6B5A125EBA9582
Operation took 0 minutes 15 seconds...
Erasing...
Found 4 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 0139FFFF...
ADL -> MCU ID: 0xB470
ADL -> FLASH ID: 0x07009800
ADL -> Loader: C:\Program Files\ODEON\JAF\Flash\OMAP1510_TOSHIBAMDOCG3_7.adl
ADL -> Sending loader...
ADL -> Waiting connection to loader...
ADL -> Verify connection...
ADL -> Done!
ADL -> Write: C:\Program Files\Nokia\Phoenix\products\RAE-6\RAE6n5227.c01
ADL -> Writing flash...
ADL -> Write 5%
ADL -> Write 10%
ADL -> Write 15%
ADL -> Write 20%
ADL -> Write 25%
ADL -> Write 30%
ADL -> Write 35%
ADL -> Write 40%
ADL -> Write 45%
ADL -> Write 50%
Erasing area: 013A0000 - 013EFFFF...
ADL -> Write 55%
Erasing area: 017A0000 - 017EFFFF...
ADL -> Write 60%
Operation took 0 minutes 39 seconds...
Writing...
ADL -> Write 65%
ADL -> Write 70%
ADL -> Write 75%
ADL -> Write 80%
ADL -> Write 85%
Perm. Data Restore OK
Operation took 0 minutes 14 seconds...
ADL -> Write 90%
ADL -> Write 95%
ADL -> Write 100%
ADL -> Write: C:\Program Files\Nokia\Phoenix\products\RAE-6\RAE6n5227.l20
ADL -> Writing flash...
ADL -> Write 5%
ADL -> Write 10%
ADL -> Write 15%
ADL -> Write 45%
ADL -> Write 50%
ADL -> Write 55%
ADL -> Write 85%
ADL -> Write 90%
ADL -> Write 95%
ADL -> Write 100%
ADL -> Write: C:\Program Files\Nokia\Phoenix\products\RAE-6\RAE6n5227.u20
ADL -> Writing flash...
ADL -> Write 85%
ADL -> Write 100%
ADL -> Done!
Restarting MCU...
Flashing Done!
Operation took 1 minutes 54 seconds...

After flash processing...
Waiting for phone to boot...
Reading...
Phone type: RAE-6, Software version: 4.55.01
IMEI: 355369000291807
Product Code:
Resetting PPC...
Done!