nokia 112 restart done by best with modify usb

**dunken** · 12-04-2013, 03:27 PM

wanna share just for refference for nokia 112 rm 837
problem was restart
i used this
firmware
nokia 112 rm 837
used usb modefied with pin out

connect and put batterry after put firmware tick dead mode and
flash

Code:

Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.50_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!
Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 354135059232427
IMEI 2 : 354135059232435
PCcode : +  ?
?

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\354135059232427_354135059232435_2nd_XG213_CRT.rpl


   ===Flashing [MCU]===
File : rm837__03.32.mcusw
Image : rm837__03.32.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:02 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01940000
Erasing, wait ... 
Erase done, time : 00:00:50 
Write , Start : 0x40280000 , Len : 0x018C0000
Flashing , wait ...
Region flash done, time : 00:00:38
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip

   ===Flashing [PPM]===
File : rm837__03.32.ppm_s1
Image : package_s1.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41BC0000 , Len : 0x00600000
Erasing, wait ... 
Erase done, time : 00:00:08 
Write , Start : 0x41BC0000 , Len : 0x003F3B88
Flashing , wait ...
Region flash done, time : 00:00:04

   ===Flashing [CNT]===
File : rm837__03.32.image_s1_059P4R9
Image : package_s1_059P4R9.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x421C0000 , Len : 0x01C60000
Erasing, wait ... 
Erase done, time : 00:01:04 
Write , Start : 0x421C0000 , Len : 0x00FE0000
Flashing , wait ...
Region flash done, time : 00:00:21
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:02 
No write data, skip

Flashing done!
Total flash time : 00:03:14
Reboot phone now...

Reading Phone Info....
Connected phone -   Nokia 112
Software Info:     V 03.32 25-09-12 RM-837 (c) Nokia            
IMEI:  354135059232427
PPM version :   V 03.32 25-09-12 RM-837 (c) Nokia             S1
Product code:  059P7C5
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:03:47
Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info...  - Ok

Phone disconected!

done no phone pics ,,,,,tinangay na ng me ari..