Big problem after solve contact service Rh-93

Printable View

04-08-2010, 07:29 PM
TarikuL

Big problem after solve contact service Rh-93

My 1110i-RH-93 after solve contact service
Set restart after a few minutes or dead.
Sometime i flash complete
but not take UI Factory then again i check
1st boot err
2nd boot er
When dead i flash again but same problem.
Full erase then flash but same problem.

Boot chek
1st Boot: Ok, DCT4, UPP: 2201 [Rh-93] [2.1.0.1]
2nd Boot: u_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00012A7E,Amd 29BDS320
Algorithm: u_amd.fia, Ver: 4.79.0

Here the information log last flash.

MCU SW : V 7.02 10-12-07 RH-93 (c) NMP
PPM SW : V 7.02 10-12-07 RH-93 (c) NMP QA
Prd.Code: 0536542
Bpr.Code: 0536354
Prod.Sn : IBH842972
HW Vers : 0526
UEM : 1314
UPP : 8705 [2201]
RFIC Ver: 0500
DSP Vers: P05w06.v34
LCD Type: WIN:MYKS:00 ST7506
IMEI : 351873-01-277651-9
SL Conf : 001-01-00000000000
SL Prof : 800000000001000-2
SL Var : 00003518730127765100
SL Aux : 00020000
HW Sig : 982445E7ECE4A7C4
Box Id : 894FFFFFFFFFFFFF
BLK1= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK2= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK3= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK4= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK5= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK6= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK7= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
MastCode: 76 21 66 13 37
Provider: GSM Test Equipment
#pw+ 802 511 525 027 522 +1#
#pw+ 158 324 576 655 632 +2#
#pw+ 839 551 250 747 163 +3#
#pw+ 796 210 213 424 623 +4#
#pw+ 155 164 073 343 773 +5#
#pw+ 036 043 554 452 751 +6#
#pw+ 838 501 256 627 113 +7#

How can problem solve?
04-08-2010, 08:01 PM
trinkaljuneja

Contact service not always software proble

may be due to uem solved 2 sets having contact service solved after flashing
but restart after some time or swith off
04-08-2010, 08:02 PM
krishna

just dry solder the upp carefully and flash again
04-08-2010, 10:17 PM
laltusk

rehot upp with flox cearfuly
07-08-2010, 12:07 PM
akashay

change the display

change the display problem solve
07-08-2010, 12:26 PM
smilegsm

Quote:

Originally Posted by TarikuL

My 1110i-RH-93 after solve contact service
Set restart after a few minutes or dead.
Sometime i flash complete
but not take UI Factory then again i check
1st boot err
2nd boot er
When dead i flash again but same problem.
Full erase then flash but same problem.

Boot chek
1st Boot: Ok, DCT4, UPP: 2201 [Rh-93] [2.1.0.1]
2nd Boot: u_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00012A7E,Amd 29BDS320
Algorithm: u_amd.fia, Ver: 4.79.0

Here the information log last flash.

MCU SW : V 7.02 10-12-07 RH-93 (c) NMP
PPM SW : V 7.02 10-12-07 RH-93 (c) NMP QA
Prd.Code: 0536542
Bpr.Code: 0536354
Prod.Sn : IBH842972
HW Vers : 0526
UEM : 1314
UPP : 8705 [2201]
RFIC Ver: 0500
DSP Vers: P05w06.v34
LCD Type: WIN:MYKS:00 ST7506
IMEI : 351873-01-277651-9
SL Conf : 001-01-00000000000
SL Prof : 800000000001000-2
SL Var : 00003518730127765100
SL Aux : 00020000
HW Sig : 982445E7ECE4A7C4
Box Id : 894FFFFFFFFFFFFF
BLK1= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK2= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK3= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK4= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK5= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK6= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
BLK7= L1: OPEN L2: OPEN L3: OPEN L4: OPEN L5: OPEN
MastCode: 76 21 66 13 37
Provider: GSM Test Equipment
#pw+ 802 511 525 027 522 +1#
#pw+ 158 324 576 655 632 +2#
#pw+ 839 551 250 747 163 +3#
#pw+ 796 210 213 424 623 +4#
#pw+ 155 164 073 343 773 +5#
#pw+ 036 043 554 452 751 +6#
#pw+ 838 501 256 627 113 +7#

How can problem solve?

bro many time i am solve this problem by flashing with RH-70
(RH-93 to RH-70) try if ur luck
07-08-2010, 01:39 PM
TarikuL

Quote:

Originally Posted by smilegsm

bro many time i am solve this problem by flashing with RH-70
(RH-93 to RH-70) try if ur luck

Sir PM write problem help by suggestion.

Give modify PM.
07-08-2010, 02:23 PM
smilegsm

Quote:

Originally Posted by TarikuL

[SIZE="5"]
Sir PM write problem help by suggestion.

Give modify PM.
SIZE]

here is pm files

Attachment 23799

Attachment 23800
[/CENTER]
07-08-2010, 05:26 PM
TarikuL

Now after a few minutes set off automatically.
07-08-2010, 06:27 PM
shaiksha85

Quote:

Originally Posted by TarikuL

Now after a few minutes set off automatically.

may be its rpl complaint

or heat flash ic with small amount of flex
08-08-2010, 03:49 PM
laltusk

eres full flash ten write full flash and pm file
08-08-2010, 04:16 PM
TarikuL

Big problem after solve contact service Rh-93

Quote:

Originally Posted by laltusk

eres full flash ten write full flash and pm file

Already test this solution.

Thanks bro
08-08-2010, 08:05 PM
bilal642005

nice but i have big problam i softwear nokia 1110 1112 1600 too much mobie is dead postion but it softwear is ok but mostly mobile go only nokia mode in sater up some time it go to contect seves agean so plz tell me whats the reasen it cabel falt?
08-08-2010, 08:23 PM
laltusk

try to letest flash file or use JAF\mx key
11-08-2010, 11:02 PM
imrang

bro use 7.02 ver for flash