plz help me friends .1208 contact service . after flashing problem not selved
Printable View
plz help me friends .1208 contact service . after flashing problem not selved
Change LCD and Check..Quote:
Originally Posted by kumarbijay
If Same Try This :
Attachment 24872
If Still Same Post INFO Log..
________
SkyNet
After flash Unlock With JAF
or
Write good Pm
Its Software Fault not Hardware
after i reset this part phone completly dead . on/off vol. ok . then am try to flash but msg show 1st boot error . plz help me friendsQuote:
Originally Posted by SkyNet4u
try the image......(post log)...Quote:
Originally Posted by kumarbijay
It is I think not hardware problem.
write good PM and unlock initial sim lock
problem may be solved
flesh up date soft after not solved just slide heat in power ic ?Quote:
Originally Posted by kumarbijay
Now set is on but problem still same now . Also try all process . Any other idea master's
try unlock with mxkey.............Quote:
Originally Posted by kumarbijay
http://www.gsmindia.in/forum/attachm...-corrupted.rar
Now Flash with ver 6.0 and unlock.Quote:
Originally Posted by kumarbijay
Phone alive again.
friend first u change the display connector , if not solved flahs with lateest version. post reply
please read the pm file & write the pm file