1600 contact service problem .plz help me . i also try with software
Printable View
1600 contact service problem .plz help me . i also try with software
if you have HWK, then do INIT simlock and try again, if still not solved, reheat lightly the UEM and CPU with good liquid flux and post result
100% contact service remove
flash your phone again then erase this addresses
Start Address: 013F0000
End Address: 013FFFFF
Write pm then unlock
wash the pcb thouruly with acitone and then heat the whole pcb at min
if still then check display
flash with latest softwarwe
Dear,
use 7.2 version
Flash can not solve contact service.
write good PM
simunlock
If not succesfull then hardware problem
Flash can not solve contact service.
write good PM then
simunlock
If not succesfull then hardware problem
Flash can not solve contact service
USE JAF FLASER
use 7.2 version
WHEN FLS COMPLIT
UNLOCK SAME VERSON
SETING RESTOR