Cyclone Shot, "HASH 9DD" Unlock, V30/V300 unlock, Simlock rebuild and more... **

=====================
Installer v1.03
02.01.2010
=====================
- Added new BB5 Unlock,Relock,Autolock,Repair Method by RPL Generation, this uses server and consumes 10 logs whilst your credits amount must be > 100.
- Supported are ALL PA_SL2 Phones, both RAPv3 and RAPIDO, with following hashes:

9A28E119033B91D14D22838C86D0D53C
9DDBFCFE6E73CED7D8C6268C8EB85723
38F312750F686F9FC9B1B3778774A195
BAF3A9C3DBFA8454937DB77F2B8852B1
CAEEBB65D3C48E6DC73B49DC5063A2EE
F2D76DFAFD66C7F195F278417DF05888
F682624FFB08F6D955DBE7D9C0485084
FCB5C510AF7F09F313D9BDE85A707CC0

- Before unlock software will ask you (when possible) if you want RPL calculation. If you don't need unlocking by RPL, simply click NO and old free unlocking methods will be used (PM308+120 recalc, Secure RAM dump and NCK calc on RAPIDO PA_SL2 phones, etc). However there are some phones which might be unlocked only using new method (9DDB - 3600,5220,7310, or new 5800 >v.30, new N96, etc)
- After unlock, requested RPL file will be saved to STORED FILES dir, it might be used later after phone chip erase, etc - as a generic backup
- To Autolock/Relock use "Import SL5" function and point to SL5 array file in "UnlockData" dir, with SW comes few generated files
- If you need SL5 file for your network, use "Create SL5" button and enter MCC-MNC, SL5 file will be generated for you and your phone might be relocked
- SL Area might be repaired using UNLOCK button for SL2 phones
- RPL Write bugs fixed ("simlock not accepted" after few tries)
- Path "/" problem fixed
- Memory manager updated to v4.94
- New skin manager introduced (6.53) - removed flash files selection bugs
- GUI redesigned a bit
- Nokia Connectivity Cable Driver updated to v7.1.22
- 2760h RM-391 v06.83 Unlock / Relock added
- 2330c RM-512 v09.55 Unlock / Relock added
- 2330c-b RM-513 v09.55 Unlock / Relock added
- 2720f RM-519 v08.42 Unlock / Relock added
- 2720f-b RM-519 v08.42 Unlock / Relock added
- 2720f RM-519 v09.55 Unlock / Relock added
- 2720f-b RM-519 v09.55 Unlock / Relock added
- SX4 Bypass during BB5 Unlock removed, is no needed anymore
- Fixed USB stack hanging up on some Windows configuration due to invalid hexcodes in BoardCode Revision USB Field
- After Super DCT4 Activation in Credits tab box Security Page is automaticlly upgraded, no need doing it manually
- New firmware v01.15 introduced - box can switch itself from MAIN mode to BOOT mode (no USB reconnect needed anymore)
- 6220c,3600s booting fixed in new firmware
- New Secure bootloader v02.10 introduced
- New bootloader supports more types of smartcards (autobaud, PTS protocol negotiation, etc)
- Secure BootAgent v1.00 introduced in new firmware
- Firmware RTOS Code Updated to v6.0.1
- Slightly code optimizations and stability improvments in new firmware
- Secure Bootloader upgrade introduced after box maintenance
- Added support for Cyclone box HW REV A116, A117, A118, A119, A11A, A11B, A11C

Hi to all,
This is the latest Update for PolarBox2 customers :

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
PolarSuite Update - Version 2.3.4
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

ALCATEL PHONES:

* Alcatel OT-Friends World First !!!

- Unlock (Via flashing)
- Write function (Firmware/Language and Eeprom backup)
- Change Language (Via flashing)
- Repair function (Via flashing)
- Reset Usercode (Via flashing)
- Working with baudrate up to 921.600 Bds

- Fixed bug in OT-800 flashing (repair dead phones)
tested here http://forum.gsmhosting.com/vbb/show...=853301&page=3

SAMSUNG PHONES:

* Samsung C3053
* Samsung E370L
* Samsung E1085
* Samsung F210L
* Samsung M310V
* Samsung S401
* Samsung T456
* Samsung T929

- Added support for this phones
- Direct Unlock or Read Codes

LG PHONES:

* LG KP109
* LG KG208
* LG MG296
* LG U8380

- Added support for this phones (2G models)
- Unlock, Repair and Flashing features

HUAWEI PHONES:

* Huawei U7315

- Direct unlock (Real, no patch and not need enter xxxxxxxxxx digits after unlock)
- Added READ NCK (unlock code)
- Read Usercode
- Added RESET for "NCK Counter Locked"
- Both processes (Unlock and Read codes) clear this counter automatically ...

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
PandaSuite Update - Version 1.1.3
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Added 16 models MORE to the activation (and for unlock with credits) !!!

FULL COMPLETE LIST SUPPORTED :
Note : In red color HTCs added in update v234

* HTC P3700
* HTC P3701
* HTC P3702
* HTC Touch Diamond
* HTC Touch Diamond P3702
* HTC T. Diam. (White Gold Ed.)
* Orange & HTC T. Diamond
* Dopod S600
* Dopod S900 (T. Diamond)
* Emobile Emonster Lite S12HT
* O2 XDA Diamond
* O2 XDA Ignito
* O2 XDA Star
* T-Mobile MDA Compact IV
* T-Mobile MDA Touch Plus
* HTC Innovation NIKI 100
* HTC P5500 / HTC P5520
* HTC Touch Dual
* Swisscom & HTC T. Diamond
* Vodafone & HTC T. Diamond
* TC TyTN II
* Orange & HTC TyTN II
* Vodafone VPA Compact V
* Vodafone v1615
* SFR v1615
* Swisscom XPA v1615
* T-Mobile MDA Vario III
* AT&T Tilt
* O2 Xda Stellar
* EMobile Emonster S11HT
* Emobile Emonster S21HT
* NTT DoCoMo PRO series HT-02A
* Orange & HTC Touch Dual
* Swisscom & HTC Touch Dual
* SFR & HTC Touch Dual
* Vodafone & HTC Touch Dual

- Read Codes (NCK and SPCK)
- Totally safe process (no flashing and patching)
- Use original USB Datacable
- Server takes few seconds in read codes
- Working in other features and models for add (be tunned)


Detailed Instructions for Unlock HTC Phones

1.- First, install ActiveSync software “Active_Sync_v45.zip” ( you can find inside /Drivers/HTC )
2.- Remove battery of the HTC phone and put back again ( be sure battery is not empty)
3.- Press power and wait near 60 seconds for be sure power on completely ( more important )
4.- Plug USB datacable and wait till sincronize with ActiveSync Software ( will take few seconds )
5.- Open PandaBox software, select correct model and press CONNECT BUTTON
6.- Wait few seconds, and press yes in the HTC screen when phone ask you ( if is necesary )
7.- After press YES, wait until phone will be detected again ( you will hear windows sound )
8.- Wait 5 seconds and press READ CODES button
9.- After few seconds, NCK and SPCK will appear in screen

BLACKBERRY PHONES:

* Blackberry 9550

- Read Codes (NCK)
- Totally safe process (no flashing and patching)
- Use original USB Datacable

TestBox2 44:LG2D, 15:LG3G, 45:Samsung3G - Models added:

LG2D Infineon Another Unlocker: 39 models supported.
//-----------------------------------------------------------
> Unlock, Read NCK, Read EEP, Backup EEP.
GB100 GB102 GB105 GB106 GB108 GB110 GB115 GB130
KE600 KE770 KE800 KE850 KE850A KE970 KE970GO
KG270 KG271 KG275 KG276 KG278 KG285 KG288 KG289 KG370 KG375
KP100 KP105 KP105A KP105B KP106 KP106A KP106B KP107A KP108
MG160A MG160B MG161 MG161A MG370

LG3G Qualcomm Another Unlocker: 15 models supported.
//-----------------------------------------------------------
> Unlock, R/W NVM, Repair NVM, Country change.
L03A L600i L600V L601i L602i L704i U300 U310
U450 U830 U880 U890 U900 U8210 U8290 - by patch

LG3G Qualcomm Main Soft: KU990M added.
//-----------------------------------------------------------
>Lock/Unlock. factory Reset, User code reset.
Factory Reset for set defoult & user code added.

Chinese MTK Tool Soft:

Added Fixx India Repair IMEI features.
//-----------------------------------------------------------
Improved connecting time for both work with pinout finder.

Huawei Magic Tool v2.2 : Removed Statup DS option as wish users.

Samsung 3G Another Unlocker: Added SHA1 Models Unlock.
Now Supported 99 Models !!! 91 SysInfo and 8 SHA1 Models.
//-----------------------------------------------------------
SysInfo - series:
A-series: A411, A412, A501, A551, A561, A701, A707, A717, A727, A736, A737, A747, A801, A821, A827,
F-series: F310, F318, F330, F338, F400, F406, F408, F400L, F480, F480T, F480L, F488, F490, F490v, F490N, F500, F700,
G-series: G400, G400F, G400L, G500, G508, G800, G808,
J-series: J200, J208, J630, J638,
L-series: L170, L400, L400V, L760, L760v,L760G, L766, L706G, L770, L810,
P-series: P960,
T-series: T649, T636, T639, T819, T919, T929,
U-series: U700, U700B, U700v, U708, U708B, U800, U808, U900, U900F, U900T, U900K, U900W, U900U, U908,
Z-series: Z150, Z170, Z230, Z240, Z240e, Z248, Z360, Z368, Z400, Z408, Z500, Z508, Z650i, Z720, Z720 MC Laren, ZV60.
SHA1 - series:
S-series: S8300, S8300T, S8300V,
M-series: M7500, M7600, M7600B, S5600, S5600V.



We care about our users .

B.R. TestBox2 team.

ADDED SUPPORT FOR MSL16 SECURITY
Added full support for M5650
Added full support for S3653
Added full support for I6220
Added full support for E1085
Added full support for E1080
Added full support for E1086L
FIXED SUPPORT FOR S3650

Supported Models:

-My418X - My419X - My429x
-My519x - My700L - My700X - My700xi
-Sagem Porsche Design P9521 - P9522

Supported Features:

-Unlock Phone Code (Reset to 0000)
-Clear Bad Attempts/Counters
-Phone Settings Backup
-AT Commands Terminal
-Restore Phone Settings(Coming Soon)
-Phone Diagnostic (LCD Calib.)
-Phone Update (Coming Soon)

Supported Comunication Type:

-USB / RS232
-Added Sagem USB Checker [Easy use & easy Detection For Sagem USB Comunication]

Current Server Added Updates:
-----------------------------------------------------------------------
My700X: FW version: LM5,EC: 041007 0939
My419X: FW version: LA5,VJ: 061107 1839
My419X: FW version: LA5,VE: 110607 0858
My419X: FW version: LA5,VD: 140507 1957
My419X: FW version: LA5,VH: 100807 1124
-----------------------------------------------------------------------