ORT - JTAG UPDATE
[08 JUN 2012]
Description :
- ORT Plus V1.78 Released
Release Notes:
- Samsung SHV-E160K [ APQ8060 ] Halt Method added
- Support Samsung GT-P6200
- Hynix eMMC Supported
- Flash ID : 0x594E495890014A48
- Sub Flash ID : 0x874B6E18205F001E
- SDIN2C2-4G is supported
- Enabled HTC MSM8X55 / MSM8X60 Models IMEI , CID , SN change for ORT Hardware
- How to Change IMEI / CID / SN :
- Right After Halting / Scan
- Go to Unlocker Tab and IMEI / SN Windows Will be activated
- Change and Click to confirm
- MSM8X55 USB Communication Supported
- Over USB eMMC Support Added
- Over USB SD Card Support Added
- ORT Qualcomm USB Drivers Released
- HTC MSM8X55 Phones are supported with USB for
- Read Flash
- Write Flash
- Repair Dead Boot
- Unlocking
- CID Change
- IMEI Change
- SN Change
Test Point Usage :
- if Qualcomm Drivers are not found
- Power Off the Phone
- Connect TP to GND and Power ON the phone
- Remove TP after Qualcomm Drivers are installed
- Drivers Are located " C:\Program Files\ORT\drivers\ORTQualcommUSB "
- ORT Team Will release test points for the supported models
- eMMC Test Point is used to trick the cpu that there is no boot in the eMMC
- and the cpu run the boot inside the rom and enumerate a qualcomm usb device on the pc's usb.
- When the loader runs,pc will detect the phone as "ORT Qualcomm USB" device.
ORT Team News and Blog :
ORT-JTAG - The Real JTAG'gers
http://www.ORT-JTAG.com
Bookmarks