help me

**Service Team** · 23-12-2011, 10:05 PM

nokia 1209 flashing error any 1 help me

1st Boot: Ok, DCT4, UPP: 2292 [Rh-105] [2.2.0.3]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u3_st_i.fia, Ver: 4.79.0
Algorithm Ok, MSID: 84B643CE519D5145794B5840F6
Decoded MSID: 3E4EBAE9-009BB3CA-A8000000
Encoded FAID: 14B386F3-29CEBFC4-BE848339
IMAGE: rh105_06.000
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:01
Area2: 0x01010000-0x013AFFFF Erased, Time: 00:52
Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:04
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:13
IMAGE: rh1050_nai6.00ej
Erasing: 0x01380000-0x013AFFFF ...
Erasing Error: 10, at: 0x01380000-0x0139FFFF, 940102, Time: 00:02
Process Failed, Repowering Mobile

**laltusk** · 23-12-2011, 10:39 PM

Originally Posted by kanniappan

nokia 1209 flashing error any 1 help me

1st Boot: Ok, DCT4, UPP: 2292 [Rh-105] [2.2.0.3]
2nd Boot: u3_2nd.fia, Ver: 4.79.0
Fl0: 0x01000000-0x013FFFFF,00208828,St M58MR032
Algorithm: u3_st_i.fia, Ver: 4.79.0
Algorithm Ok, MSID: 84B643CE519D5145794B5840F6
Decoded MSID: 3E4EBAE9-009BB3CA-A8000000
Encoded FAID: 14B386F3-29CEBFC4-BE848339
IMAGE: rh105_06.000
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:01
Area2: 0x01010000-0x013AFFFF Erased, Time: 00:52
Area3: 0x013B0000-0x013EFFFF Erased, Time: 00:04
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:13
IMAGE: rh1050_nai6.00ej
Erasing: 0x01380000-0x013AFFFF ...
Erasing Error: 10, at: 0x01380000-0x0139FFFF, 940102, Time: 00:02
Process Failed, Repowering Mobile

skip eras and tray to flash

**Service Team** · 24-12-2011, 09:17 AM

THANKS for ur reply....

skip erase i try it
but same error shown

any idea bro................

**TarikuL** · 24-12-2011, 10:09 AM

Try with another device.
HWK has some bug on DCT4

**facebook.com** · 24-12-2011, 10:49 AM

Don't try another device u can fix ur phone by hwk
just full erase then try to full flash if not ok then try hardware just rehot flasher thenagain try hwk tested by me many times

br,
Shamim

**shaiksha85** · 24-12-2011, 11:16 AM

Universal_DCT4_MCU_eraser

Use This File In MCU

Flash With Only This File

Then Reflash With Latest Version
Write Full PM & Unlock

**One_Hermit** · 24-12-2011, 11:56 AM

If Erase File Not Work you can Try Latest Firmware...
If You are Using Last Firmware and No Other Firmware Available - Heat Flash IC and Try Again...

You can Also Try This Method : [Works Sometimes]
1. Erase Full Flash
2. Untick "Use INI File Settings"
3. Select Files by Set's Product Code
4. First Flash with PPM by Selecting "Flash PPM Only"
5. Full Flash

Action Mode.png