Results 1 to 6 of 6

Thread: Do you want to repair/Unlock Q-MOBILE ?

  1. #1
    GsmIndia.in Active Teen jumper-master's Avatar
    Join Date
    Nov 2007
    Location
    AL-ASIF MOBILE LAB (SGR/HYD) PK
    Age
    37
    Posts
    70

    Default Do you want to repair/Unlock Q-MOBILE ?

    THIS THREAD IS SPEACIALLY FOR PAKISTANI TECHNICIANS.

    Do you want to repair/Unlock Q-MOBILE ? yes it is possible with INFINITY BOX,I and my team (jumper-master,asif.arain) created its repair/unlock 1st in the world and worked successfully.
    Now i share with you log reports of these type of phones.Try it on 6205-6227 NOR mode,it is MT6223 and MT6225 cpu type and post your result with log report here.



    E200

    Action: read/check information
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched ON !
    Connecting, wait...
    Phone detected, wait...
    Hardware version: MT6223, E05
    Hardware version: TINNO23C_08A_GEMINI_HW
    Software version: E200_PAKISTAN_PR1_R3
    Software date: 2000.00.00
    Barcode: Y2720924002810 10
    imei-1: 355***********
    imei-2: 355***********
    imei-3: 355***********
    Finished, time used: 9 sec
    Remove/Install battery now !





    Action: read/check information

    COM12 [VCP0] selected
    module v3.05
    Device: Autodetect 6205-6227 NOR
    Checking data, wait...
    advanced flash detection enabled
    Action: read/check information
    ====> Boot ...
    Press and HOLD Power button now !
    19200 fixed
    Connecting, wait...
    Initializing [6223:8A05:8A00]...
    CPU: MT6223
    high speed boot On
    chip: 0011:96FA:000C
    status: FF
    boot packet size: 0400
    Release Power button now !
    Boot Done
    ====> Initialize ...
    detecting chip #00 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    detecting chip #01 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    detecting chip #02 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    detecting chip #03 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    number of flash chip/regions detected: 04/01
    Initialize Done
    ====> Set baud ...
    115200
    Set baud Done
    ====> Initialize bootcode ...
    Initialize bootcode Done
    ====> Check firmware integrity ...
    device parameters detection in progress...
    detecting chip #00 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    detecting chip #01 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
    number of flash chip/regions detected: 01/01
    total flash region size: 01000000
    usb bootloader detect...
    ..
    usb bootloader detect (phase #2)...
    ..
    usb bootloader (chip) is absent
    searching rom info...
    search rom info finished
    rom info structure: 2nd [standard] generation
    TCL-ID is absent
    rom info detection finished
    ====================
    New firmware detected (v.3.05, database date: 11.01.2010):
    TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0.BIN
    This firmware is missing in support area. If this phone is good and working:
    - download latest software from support area and try again, probably this firmware already supported in latest software
    - make "Read full flash" operation
    - send flash backup files to support: mt62xx@gmail.com or upload files to http://rapidshare.com or http://4shared.com
    - include in your e-mail full text from phone back label (phone name etc.)
    ====================
    rom info ver: 05
    sw version: TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0.BIN
    project-id: E200_PAKISTAN_PR1_R3.0, 00000000
    code offset: 00000000
    ffs offset/size [01]: 00E00000/001F8000
    rom info structure: 2nd [standard] generation
    TCL-ID is absent
    detecting ffs/eeprom area in 1 chip(s)...
    standard ffs/eeprom offset detected: 00E00000
    standard ffs/eeprom offset confirmed: 00E00000
    detecting ffs/eeprom size...
    ffs/eeprom size: 00200000
    ffs/eeprom chip: 00
    ffs/eeprom area: 00000000:00E00000-00FFFFFF
    detecting ffs/eeprom structure pass 1...
    .............................
    detect standard ffs/eeprom location pass #1...
    .................................................. ......
    detect extended ffs/eeprom location pass #1...
    .........................................
    detect standard ffs/eeprom offset pass #1...
    ffs/eeprom record offset detected
    detect standard ffs/eeprom data...
    ffs/eeprom record size detected
    ffs/eeprom layout detection complete
    ffs/eeprom detected ok: element #1
    sec info (detailed) detection...
    searching sec info#1...
    .
    search sec info#1 finished
    detecting firmware version...
    firmware version: TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0.
    detecting firmware build...
    .........................................
    firmware build: 200905111917
    detecting product-id...
    .................................................. ..............
    done
    detecting languages...
    ....................................
    language parameters detected
    detected languages: En Ar
    sec info (detailed) detection...
    searching sec info#1...
    .
    search sec info#1 finished
    Finished, time used: 1 min 39 sec
    Remove/Install battery now !




    User lock code in (standard mode)

    COM12 [VCP0] selected
    module v3.05
    Device: Autodetect 6205-6227 NOR
    Checking data, wait...
    advanced flash detection enabled
    Action: "user code"
    unlock method: standard
    ffs/eeprom backup enabled, it may takes several minutes !
    ====> Boot ...
    Press and HOLD Power button now !
    19200 fixed
    Connecting, wait...
    Initializing [6223:8A05:8A00]...
    CPU: MT6223
    high speed boot On
    chip: 0011:96FA:000C
    status: FF
    boot packet size: 0400
    Release Power button now !
    Boot Done
    ====> Initialize ...
    detecting chip #00 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    detecting chip #01 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    detecting chip #02 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    detecting chip #03 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    number of flash chip/regions detected: 04/01
    Initialize Done
    ====> Set baud ...
    115200
    Set baud Done
    ====> Initialize bootcode ...
    Initialize bootcode Done
    ====> Check firmware integrity ...
    device parameters detection in progress...
    detecting chip #00 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    detecting chip #01 in region #00...
    flash: 2088C4FFFFFFFF:2088C400000000
    flash: ST Intel/Sharp ext [def 007Fx020000 0004x008000] 16Mb
    it's time to stop: 2B0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
    number of flash chip/regions detected: 01/01
    total flash region size: 01000000
    usb bootloader detect...
    ..
    usb bootloader detect (phase #2)...
    ..
    usb bootloader (chip) is absent
    searching rom info...
    search rom info finished
    rom info structure: 2nd [standard] generation
    TCL-ID is absent
    rom info detection finished
    ====================
    New firmware detected (v.3.05, database date: 11.01.2010):
    TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0.BIN
    This firmware is missing in support area. If this phone is good and working:
    - download latest software from support area and try again, probably this firmware already supported in latest software
    - make "Read full flash" operation
    - send flash backup files to support: mt62xx@gmail.com or upload files to http://rapidshare.com or http://4shared.com
    - include in your e-mail full text from phone back label (phone name etc.)
    ====================
    rom info ver: 05
    sw version: TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0.BIN
    project-id: E200_PAKISTAN_PR1_R3.0, 00000000
    code offset: 00000000
    ffs offset/size [01]: 00E00000/001F8000
    rom info structure: 2nd [standard] generation
    TCL-ID is absent
    detecting ffs/eeprom area in 1 chip(s)...
    standard ffs/eeprom offset detected: 00E00000
    standard ffs/eeprom offset confirmed: 00E00000
    detecting ffs/eeprom size...
    ffs/eeprom size: 00200000
    ffs/eeprom chip: 00
    ffs/eeprom area: 00000000:00E00000-00FFFFFF
    detecting startup code area #2...
    .................................................. .................................................. .................................................. .................................................. .................................................. ......
    startup code area #2 is absent
    detecting ffs/eeprom structure pass 1...
    .............................
    detect standard ffs/eeprom location pass #1...
    .................................................. ......
    detect extended ffs/eeprom location pass #1...
    .........................................
    detect standard ffs/eeprom offset pass #1...
    ffs/eeprom record offset detected
    detect standard ffs/eeprom data...
    ffs/eeprom record size detected
    ffs/eeprom layout detection complete
    ffs/eeprom detected ok: element #1
    sec info (detailed) detection...
    searching sec info#1...
    .
    search sec info#1 finished
    Check firmware integrity Done
    ====> Check firmware content ...
    Check firmware content Done
    ====> Backup required data ...
    reading: TINNO23C_08A_GEMINI_PCB01_GPRS_MT6223P_S00.E200_PA KISTAN_PR1_R3_0__ffs...
    file saved: C:\Program Files\InfinityBox\ChineseMiracle\TINNO23C_08A_GEMI NI_PCB01_GPRS_MT6223P_S00.E200_PAKISTAN_PR1_R3_0__ ffs_20100125-143421.B0E.bin
    flash: 2088C4FFFFFFFF:2088C400000000
    Backup required data Done
    ====> Patch required data ...
    detection procedure, wait...
    detection procedure completed
    Patch required data Done
    ====> Special operation ...
    Special operation Done
    ====> Write ...
    flash: 2088C4FFFFFFFF:2088C400000000
    Write: ffs
    Write Done
    ====> Finalization ...
    Finalization Done
    Finished, time used: 8 min 18 sec
    Remove/Install battery now !





    E400


    GENERAL INFORMATION


    Action: read/check information
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched ON !
    Connecting, wait...
    Phone detected, wait...
    Hardware version: MT6225, E05
    Hardware version: TINNO25_GEMINI_HW
    Software version: E400-PK.FM.V7"
    Software date: 2006.06.14
    Barcode: L2710922009039 10
    imei-1: 3578**********
    imei-2: 3578**********
    imei-3: 3578**********
    Finished, time used: 6 sec
    Remove/Install battery now !



    DETAILED INFORMATION



    COM4 [VCP0] selected
    module v3.05
    Device: Autodetect 6205-6227 NOR
    Checking data, wait...
    advanced flash detection enabled
    Action: read/check information
    ====> Boot ...
    Press and HOLD Power button now !
    19200 fixed
    Connecting, wait...
    Initializing [6225:8A05:8A00]...
    CPU: MT6225
    high speed boot On
    chip: 0001:7E03:0003
    status: FF
    boot packet size: 0400
    Release Power button now !
    Boot Done
    ====> Initialize ...
    detecting chip #00 in region #00...
    flash: 98000300000001:18E59F00000000
    flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
    detecting chip #01 in region #00...
    flash: 98000300000001:18E59F00000000
    flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
    detecting chip #02 in region #00...
    flash: 98000300000001:18E59F00000000
    flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
    detecting chip #03 in region #00...
    flash: 98000300000001:18E59F00000000
    flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
    number of flash chip/regions detected: 04/01
    Initialize Done
    ====> Set baud ...
    115200
    Set baud Done
    ====> Initialize bootcode ...
    Initialize bootcode Done
    ====> Check firmware integrity ...
    device parameters detection in progress...
    detecting chip #00 in region #00...
    flash: 98000300000001:18E59F00000000
    flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
    detecting chip #01 in region #00...
    flash: 98000300000001:18E59F00000000
    flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
    it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
    number of flash chip/regions detected: 01/01
    total flash region size: 01000000
    usb bootloader detect...
    ..
    usb bootloader detect (phase #2)...
    ..
    usb bootloader (chip) is absent
    searching rom info...
    search rom info finished
    rom info structure: 2nd [standard] generation
    TCL-ID is absent
    rom info detection finished
    ====================
    New firmware detected (v.3.05, database date: 11.01.2010):
    TINNO25_GEMINI_PCB01_GPRS_MT6225_S00.E400-PK_FM_V7.BIN
    This firmware is missing in support area. If this phone is good and working:
    - download latest software from support area and try again, probably this firmware already supported in latest software
    - make "Read full flash" operation
    - send flash backup files to support: mt62xx@gmail.com or upload files to http://rapidshare.com or http://4shared.com
    - include in your e-mail full text from phone back label (phone name etc.)
    ====================
    rom info ver: 04
    sw version: TINNO25_GEMINI_PCB01_GPRS_MT6225_S00.E400-PK_FM_V7.BIN
    project-id: E400-PK.FM.V7, 00000000
    code offset: 00000000
    ffs offset/size [01]: 00E00000/001F0000
    rom info structure: 2nd [standard] generation
    TCL-ID is absent
    detecting ffs/eeprom area in 1 chip(s)...
    standard ffs/eeprom offset detected: 00E00000
    standard ffs/eeprom offset confirmed: 00E00000
    detecting ffs/eeprom size...
    ffs/eeprom size: 00200000
    ffs/eeprom chip: 00
    ffs/eeprom area: 00000000:00E00000-00FFFFFF
    detecting ffs/eeprom structure pass 1...
    .......................
    detect standard ffs/eeprom location pass #1...
    .................................................
    detect standard ffs/eeprom offset pass #1...
    ffs/eeprom record offset detected
    detect standard ffs/eeprom data...
    ffs/eeprom record size detected
    ffs/eeprom layout detection complete
    ffs/eeprom detected ok: element #1
    sec info (detailed) detection...
    searching sec info#1...
    .
    search sec info#1 finished
    detecting firmware version...
    firmware version: TINNO25_GEMINI_PCB01_GPRS_MT6225_S00.E400-PK_FM_V7.BIN
    detecting firmware build...
    .................................................
    firmware build: 200905262227
    detecting product-id...
    .................................................. ..............
    done
    detecting languages...
    .............................................
    language parameters detected
    detected languages: En Ar
    sec info (detailed) detection...
    searching sec info#1...
    .
    search sec info#1 finished
    Finished, time used: 2 min 20 sec
    Remove/Install battery now !


    FORMAT IN SAFE MODE




    COM4 [VCP0] selected
    module v3.05
    Action: reset settings ("format ffs")
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    19200 autodetect
    Initializing [6225:8A05:8A00]...
    CPU: MT6225
    high speed boot On
    chip: 0001:7E03:0003
    status: FF
    Connecting at 19200, wait...
    Release Power button now !
    Phone detected, wait...
    Hardware: MT6225,E05
    Date: 2006.06.14
    Version: 1.0
    Version: E400-PK.FM.V7
    Version: TINNO25_GEMINI_HW
    detecting structure #2...
    5 11 done
    67 byte(s) read
    imei: 35783102101528
    connection Ok
    building list...
    done
    items to clear: 177
    warning: wrong packet cs
    warning: wrong packet cs
    items cleared: 177 of 177
    building list...
    done
    items remains: 0
    Finished, time used: 32 sec
    Remove/Install battery now !

    REPAIR IMEI


    IMEI 1
    Action: "repair imei"
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched ON !
    Connecting, wait...
    Phone detected, wait...
    imei-1: 357************
    imei write method: mode-1
    imei write channel: imei #1 for dual sim/mono CPU
    new imei-1: 357************
    verification Ok
    Finished, time used: 5 sec
    Remove/Install battery now !

    2nd IMEI

    Action: "repair imei"
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched ON !
    Connecting, wait...
    Phone detected, wait...
    imei-2: 135790246811220
    imei write method: mode-1
    imei write channel: imei #2 for dual sim/mono CPU
    new imei-2: 357************
    verification Ok
    Finished, time used: 3 sec
    Remove/Install battery now !


    INFINITY IS THE BEST TOOL FOR CHINESS TYPE PHONES


    IF YOU LIKE MY POST JUST HIT THANKS BUTTON

  2. #2
    GsmIndia.in Board Browser
    Join Date
    May 2010
    Age
    37
    Posts
    2

    Default

    I unlocked my mobile here http://www.*************.com/unlock-your-phone/rs10wp2/ It provides unlock code and instructions...
    Last edited by One_Hermit; 20-01-2013 at 01:19 PM.

  3. #3
    GsmIndia.in Newbie
    Join Date
    Mar 2009
    Age
    40
    Posts
    29

    Default

    Q mobile k rx tx nahi mial rahain charing jeck main ko se no pe hain help me

    rameez 03013301130

  4. #4
    GsmIndia.in Active Teen jumper-master's Avatar
    Join Date
    Nov 2007
    Location
    AL-ASIF MOBILE LAB (SGR/HYD) PK
    Age
    37
    Posts
    70

    Default

    Wao great replays keep it up,cause these reasons i forget this forum,Moderators and admin sleeping.
    Last edited by jumper-master; 16-06-2010 at 11:49 AM.

  5. #5
    GsmIndia.in Board Browser
    Join Date
    Jan 2013
    Age
    34
    Posts
    2

    Default

    tell me software name

  6. #6
    GsmIndia.in Board Browser
    Join Date
    Jan 2013
    Age
    34
    Posts
    2

    Default

    Quote Originally Posted by billu View Post
    It unlocked my mobile here http://www.*************.com/unlock-your-phone/rs10wp2/ It provides unlock code and instructions...
    tell me software name
    Last edited by One_Hermit; 20-01-2013 at 01:18 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •