2600 imei ????????????????

[mayilrikin]

here is log for 2600 imei ?????????????

Getting MCU ID

MCU ID: 0x2201
FLASH ID0: 00208828 -> SEC Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.00
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 5.82
14-11-05
RH-59
(c) NMP
2600
HW version: 0620
PCI version:
UEM version: 1092
UPP version: 8705
RFIC version: 0300
DSP version: TB2.14-@
LCD version: s6b33a0
PPM version: V 5.82
14-11-05
RH-59
(c) NMP
2600
MB
ADSP SW version: V 5.82\n14-11-05\nRH-59\n(c) NMP\n2600\nmb_2
Production serial number: MJD123217
Product code: 0518411
Module code: 0202415
Basic production code: 0516271
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: ???????????????
IMEI spare to net: FA FF FF FF FF FF FF 0F
IMEI SV to net: F3 FF FF FF FF FF FF 2F F0
Master Code: 5013663745
Phone type: RH-59, Software version: 5.82, Language Pack: MB
User code: ÿ#

Block 1:


Searching for saved ini...
Checking for file D:\Program Files\ODEON\JAF\JAF_RH-59.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0518411
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-59\rh59_05.820
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-59\rh59_05.82mb
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-59\rh590_nai5.82mb_2
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,Hindi,Bahasa Indonesia,Filipino
Done!

NOW I WENT TO IMEI TOOL AND DID IMEI PATCH AND RESULT IS AS UNDER


Powering the phone...
Phone type: RH-59, Software version: 5.82, IMEI: ???????????????
Product Code: 0518411
Selected flash file: C:\Program Files\Nokia\Phoenix\Products\rh-59\rh59_05.820
Decrypting flash...
Imei patch address not found... Stoped...


please help

[neilthirumuttam]

did u tried rpl service ?

did the handset turns off with in 30 seconds ?

[chennairam]

here is log for 2600 imei ?????????????

Original Post By Mayilrikin

please help

1st Check Your Uem imei And Phone back Imei

Its Same expect last Digit

you can buy rpl For that unit

and repair Imei

Good Luck

Post result

[deywet]

try if there are available logs!!! i think it need an rpl repiar but there are a problem in using logs if the uem is already damage using log wont work,, the last resort is replacing uem

[chennairam]

try if there are available logs!!! i think it need an rpl repiar but there are a problem in using logs if the uem is already damage using log wont work,, the last resort is replacing uem

2300 uem Replaced is Very hard

1st can you check once again

Uem Imei :

Phone back imei : its Same or not

Can you post here here uem imei and phone

its its okey

i give you rpl free of cost

[ajmal]

2300 uem Replaced is Very hard

1st can you check once again

Uem Imei :

Phone back imei : its Same or not

Can you post here here uem imei and phone

its its okey

i give you rpl free of cost

Sir can I ask to u when Phone IMEI is ????????????.
is it possible that uem imei and phone back imei r same.
according to my knowledge there r 2 ways to check imei
1 phone back
2 *#06#
3 I dont know

[chennairam]

Sir can I ask to u when Phone IMEI is ????????????.
is it possible that uem imei and phone back imei r same.
according to my knowledge uem imei is ???????????

Sir you have jaf

Go to Imei tool Tab

And Read uem imei You phone back Imei X) Last digit is X

and cable cable For Mobile and match the phone back imei and uem imei

Its same

I will Give you rpl sir

This is free Because your Are members Of gsmindia

[mayilrikin]

1st Check Your Uem imei And Phone back Imei

Its Same expect last Digit

you can buy rpl For that unit

and repair Imei

Good Luck

Post result

Sir thanks for your reply

I read uem imei in jaf
its here

Booting phone...

MCU ID: 0x2201
Sending algo...
Algo is ready...
P-key nokia module version 01.00
Reading...
UEM IMEI: 30881508998829X

but the imei at back is different from the uem imei which is 35881500998829
Sir any solution for this.waiting for your reply.Also will it sucessfull if i patch imei with the uem changed.

[chennairam]

Sir thanks for your reply

I read uem imei in jaf
its here

Booting phone...

MCU ID: 0x2201
Sending algo...
Algo is ready...
P-key nokia module version 01.00
Reading...
UEM IMEI: 30881508998829X

but the imei at back is different from the uem imei which is 35881500998829
Sir any solution for this.waiting for your reply.Also will it sucessfull if i patch imei with the uem changed.

Your Uem imei is Damaged Rpl Services Also not Work

So You need Change Uem

[lbolbo]

I have the nokia 2600 whose imei is corrupt ??????????????
I am trying to send u the exact situation from jaf which is as follows:

reading...
MCU SW version: V 4.42
18-01-05
RH-59
(c) NMP
2600
HW version: 0643
PCI version:
UEM version: 1092
UPP version: 4609
RFIC version: 0300
DSP version: TB1.11
LCD version: s6b33a0
PPM version: V 4.42
18-01-05
RH-59
(c) NMP
2600
IA
ADSP SW version: V 4.42\n18-01-05\nRH-59\n(c) NMP\n2600\nia_4
Production serial number: GGD809071
Product code: 0518567
Module code:
Basic production code: 0516191
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: ???????????????
IMEI spare to net: FA FF FF FF FF FF FF 0F
IMEI SV to net: F3 FF FF FF FF FF FF 0F F4
Master Code: 5013663745
Phone type: RH-59, Software version: 4.42, Language Pack: IA
User code: MIAN ARFAN


Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RH-59.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0518567

No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
Booting phone...

MCU ID: 0x1201
Sending algo...
Algo is ready...
P-key nokia module version 01.00
Reading...
UEM IMEI: 7d600008436a26X

But on the back of my phone the imei No. is 356230004228228

Please help me how i can repair my imei.
Thanks in advance if anybody reply me sooner.

[richard_wifi]

bro...change new UEM and write RPL....problem will solve

[lbolbo]

but i am new to the flashing phones. please tell me how and where i can found rpl file.

[richard_wifi]

but i am new to the flashing phones. please tell me how and where i can found rpl file.

download from your support site

or try this RPL asic 2

must change new UEM first then write RPL

[lbolbo]

Dear richard_wifi thank u so much for quick response. Now i try to write rpl which u send to me then i will told u the result.

[amirjin]

what is the proc to use rpl bro
amir_amirjin@hotmail.com