Karbonn a15 dead any solution post here

[aasifnasim]

karbonn a15 dead (not starting in any mode)
if you have any solutions plz post here?
i was updating my karbonn a15 from customized rom to jelly bean
while in this process
my phone become dead
even pressing start button but even it is not vibrated? Or start

I DOWNLOAD EMMC_DownLoad_V1.2.4.exe
AND ITS ROMS
1. 592240_8574_WCDMA_V1043.ZIP, 592230_8574_WCDMA_V1041.ZIP
2. 592230_8574_V0336.ZIP
I MERGED THESE ROMS IN ONE FOLDER
AND TRIED LIKE BELOW IMAGES
error pic1.pngerror pic2.pngerror pic3.pngerror pic1.pngerror pic2.pngerror pic3.png

PLZ ANYBODY HAVE SOLUTIONS
POST HERE
THANX IN ADVANCE

I DOWNLOAD QPST

1. DOWNLOAD AND INSTALL Qualcomm USB Drivers.rar
2. DOWNLOAD AND INSTALL QPST-2.7.399.rar
3. DOWNLOAD AND EXTRACT FlareRevival

THEN START QPST CONFIGURATION
QPST1.png
IT WILL SHOW MY PHONE ON COM PORT ETC.
THEN START eMMC Software Download
CLICK ON Load XML def button and select rawprogram0.xml from FlareRevival folder
click on Load patch def... button and select patch0.xml file rom FlareRevival folder
Then press Download button
it show the message COM7 Phone in Download Mode
then finally it show an error
like below imgae
QPST2.png
plz help me

[sanrat]

PLZ ANYBODY HAVE SOLUTIONS
POST HERE
THANX IN ADVANCE

I DOWNLOAD QPST

1. DOWNLOAD AND INSTALL Qualcomm USB Drivers.rar
2. DOWNLOAD AND INSTALL QPST-2.7.399.rar
3. DOWNLOAD AND EXTRACT FlareRevival

THEN START QPST CONFIGURATION
Hidden Content
IT WILL SHOW MY PHONE ON COM PORT ETC.
THEN START eMMC Software Download
CLICK ON Load XML def button and select rawprogram0.xml from FlareRevival folder
click on Load patch def... button and select patch0.xml file rom FlareRevival folder
Then press Download button
it show the message COM7 Phone in Download Mode
then finally it show an error
like below imgae
Hidden Content

[paramuchml]

karbonn A15

Flash file : http://www.4shared.com/rar/L1ZIADUA/...html?locale=en

[RAVIBNL]

KArbonn a15 dead,not power on
only usb show in device manager

[piyush99]

required karbonn A15 dead solution please

[jamesjerss]

Flash Tool : Download

Flash ROM : Download

Note:

This tutorial is only suitable for the mobile which has been bricked

Warning if phone normal do not flash

Step 1: Preparing Tool

1 driver
2 tools
3 Flash ROM Pack

In Windows 7 system, connect the mobile, it will automatically download the relevant driver.
Unzip the ROM into the directory.

Step 2: Start

1 Turn off your mobile phone
2. Pressed volume + and power button
See the screen change, the phone green screen appears after the first release the power button and volume keys. In this case, the very top of the green screen display Fastboot, In this screen connect phone usb to computer to ensure normal drive.
(Win7 will automatically to install driver, For xp manual install)
Now run AP tools QUALFAST1.0.7.exedownloaded earlier, If you can not run, vc runtime installed vcredist_x86.exe



Click the "SEL PATH" button, find the AP file path (ROM), click the OK button.
Make sure FORMAT is ticked.









ROM Flash will complete and display the finished in totaltimes · · · · normaly flash takes about 110 seconds.


For full dead mobile oly yu can fix it through Jtag boxes

karbonn A15 pinout

GPGeMMC Supported this version Dump file link here

[naim2012]

I have sme problem. Karbonn a15 dead ,not power on what i doing

[sdtelecom]

I have sme problem. Karbonn a15 dead ,not power on what i doing

Read this post #6
At last portion bottom
And follow
If u have any experience about flash

[goutam19761976]

HI.MY KARBONN a15 is dead.pls give the solution for dead flashing.

[ash78663]

Same here My Karbonn Titanium S1 is Full Dead After Flashing form EMMc Download tool... No qpst mode, no Fastboot it Only Detects my phone as Qualcomm HS-USB QDLoader 9008 COM11

Please Help What to do...???

[saroj588]

Same problem plz help