Results 1 to 4 of 4

Thread: LG G2 Stock Firmware (Go Back to Stock)

  1. #1
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Cool LG G2 Stock Firmware (Go Back to Stock)

    LG G2 Stock Firmware (Go Back to Stock)



    Here are all the current KDZ files for flashing Your G2 Back to Stock, I have updated the Link below with the AT&T, T-Mobile, Verizon, and Korean ones. READ!!! The first Guide Below is to Return To STOCK For ALL Varrients!! EXCEPT for the AT&T Please read below for the steps to return to stock on AT&T

    NOTICE! - IF you download fails or does not download all the way USE A DOWNLOAD MANAGER!, Files that are usually over 1GB browsers have issues downloading them espseically if you have a slow connection.

    First Off Not Responsible if you flash the wrong one!!!!
    Guide Below for All Versions EXCEPT the AT&T Version

    How to flash ROM:
    1) Download the Rom You Want! Choose your model At the Link Below - The Files are Hosted on my server for fast speeds!
    Click Here


    2) Download LG mobile support tool and Install it. (It will open up when its done just CLOSE IT OFF)
    LG Mobile Support Tool Download

    3) Download / Install FlashTool (R&D Test Tool)
    Download Here

    4) Install LG drivers (can skip if you already installed)
    Driver Downloads

    5) Power off your G2, press Volume Up key and then plus-in the usb cable (enter to a download mode)

    6) Extract FlashTool and run UpTestEX.exe

    7) In R&D Test Tool window,
    Select Type = 3GQCT (top left hand side)
    PhoneMode = DIAG (top right hand side)
    Select kdz file = click to select your LG stock rom *.kdz
    Click "Normal web upgrade test" (bottom right hand side)
    Then another window "read phone information" pop up, click "Upgrade Start" button
    wait a few seconds, another window "Select Country & Language" pop up,
    => Country=Republic of Korea
    => Language=English
    you can click ok to proceed


    8) All Done and wait for finish!

    9) Be Sure that after flashing to perform a reset as for some reason flashing this does not remove what was there before until you reset. By turning off, Holding down power and Vol Down until it comes up on the screen.

  2. #2
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    RETURN TO STOCK AT&T Version ONLY!

    Download
    1. LGFlashTools v1.5 - Download
    2. Drivers - Download
    3. Download Both Stock Image File and DLL (Both Files) - Download


    Install

    1. Install the LG drivers downloaded above.
    2. Install LGFlashTools v1.5 (but don't run it)
    3. Extract the TOT file from the ZIP

    Drivers initialization
    1. Put the phone into download mode. (Turn off device, keep pressing volume down while plugging in the micro usb cable. If this doesn't work, try holding both volume keys instead)
    2. Let the phone initialize and install the drivers. Once done, in Device manager, you should see the LG phone listed under COM ports (something along these lines).
    3. Find that LG entry in Device Manager, click on Properties, Advanced and then change the COM port to COM41 and close/save.
    4. Unplug your phone! Important step.

    LGFlashTools
    To get this tool to work, you'll need to do a few tricks.
    1. Set the computer's date to some time in July 2012 or before.
    2. Disconnect the internet
    3. Find a serial number or register key from somewhere on the web (a google search for lgflashtools serial will yield some results). Can't help you here and please don't share any keys in this thread or get us in trouble.
    4. Execute the LGFlashTools. It should ask you for a key, put it in. Now you should see a dialog where you can load the DLL file and the TOT files that you extracted earlier. Put them both in here. Click ok

    Flashing
    5. There is a yellow arrow on the top left. Click on it to initialize the process. Once done, it should say "ready/finished" or whatever.
    6. Put the phone in download mode again, and plug it into the USB port. LG FLash Tools should start flashing it automatically. When it's done, it'll automatically reboot into your stock AT&T rom and all of your data and internal sdcard files are gone.


  3. #3
    GsmIndia.in Board Browser
    Join Date
    Dec 2013
    Posts
    6

    Default

    hello buddy, any one has a page or software to unlock lg g2 via software/usb, not imei code, I have a phone that has been entered the unlock code 10 times, so its permanently locked to att! any suggestions? thanks

  4. #4
    GsmIndia.in Board Browser
    Join Date
    Jun 2014
    Posts
    1

    Default

    it is a good job but any one has a page or software to unlock lg g2 via software/usb, not imei code, I have a phone that has been entered the unlock code 10 times, so its permanently locked to att! any suggestions?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How To Update Samsung Galaxy Pocket Duos GT-S5302 Firmware Using Stock Firmware
    By Service Team in forum Samsung Program and Flashers
    Replies: 9
    Last Post: 14-01-2015, 06:11 PM
  2. Xperia x10 mini stock firmware plz
    By amlet1972 in forum Sony Ericsson Firmware
    Replies: 2
    Last Post: 25-01-2013, 09:31 AM
  3. Samsung Galaxy S III Stock Firmware I9300XXALE8 (4.0.4)
    By jamesjerss in forum Android based Phones (Smart Phones)
    Replies: 0
    Last Post: 25-05-2012, 03:59 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •