LG-P350 Flash file or Tools Required also Guide how to flash plz help
P350.jpg
Thanks in Advance
LG-P350 Flash file or Tools Required also Guide how to flash plz help
P350.jpg
Thanks in Advance
Requirements
LG Optimus Me usb drivers
LG Optimus Me P350 firmwares
KDZ_FW_UPD_EN
LG B2CTool
How to flash LG Optimus Me Steps:
1. Install the USB drivers and LG B2C Tools
2. Unzip KDZ_FW_UPD_EN.7z and installed msxml.msi
3) Shut down the LG Optimus Me, remove the battery and connect the USB cable holding down the Volume Up button and wait until the drivers are installed (the phone should be on the "S/W upgrade Please wait" state while upgrading!!!!)
or
3′. Enable USB debugging and connect USB cable to your LG Optimus Me
4. Open your device manager and disabled under the Modem LGE Mobile USB Modem
5. Starts KDZ_FW_UPD.exe
6. In the Software Updater select "Type"=CDMA , "PhoneMode"=DIAG, and at "KDZ file" select the desired file. (The firmware .kdz file must have the name in this form!)
This will open "Read phone information" window. IN THAT WINDOW:
7. Click "Upgrade start". DO NOT CLICK ANYTHING ELSE BEFORE!
LG Updater launches…..
8. Select Country="Different country" (unless you are in Korea) and Language as you wish
LG Mobile Updater Launches………. warning you and asking your permission to continue..
9. Follow LG Mobile Updater instructions…
Let the tool running for a few minutes through and be pacient!!
ATTENTION!!
After the phone reboots first time, DO NOT UNPLUG USB CABLE!!!
WAIT!! Remove USB cable only after the log says that the flash was OK!
10. The flashing process is now finished.
How to download " LG Optimus Me P350 firmwares " please check download link
Thanks in Advance
Install Official Stock Rom(Firmware)
- Download KDZ Updater from here.
- It is a zip file. Extract all the contents of the zip file and run msxml.msi
- Download LG Drivers if you haven’t.
- Since you have updated your firmware, you need to download official LG Stock Rom for P350.
- After you do this, open KDZ Updater.exe from the downloaded zip file in first step.
- Choose the following options in KDZ Updater: Type: 3GQCT Phone Mode: DIAG and KDZ file is the one you downloaded in step 4. Click on the image below for a better view.
- Remove your phone battery and re-insert it. Hold the Volume UP+Volume Down+Power Button together. You will see a yellow screen and Emergency mode written on it.
- Connect your phone to the PC via USB
- Click on Launch software update button in the KDZ Updater.
- If everything goes well, you will see “Finished” written in the log screen and your phone will change to switched off mode from Emergency mode.
Last edited by Service Team; 26-06-2014 at 06:32 AM.
Don't spam forum, just HIT button
i want fermware for lg p350
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks