SL3 BruteForce Cloud System Updates

SL3 BruteForce Cloud System is a new addition to Martech Service Manager. The application definitely makes it easy to support multiple computers that count the codes for SL3 phonesusing Brute Force method.The application is based on oclHashcat-lite v0.06. The main part of the application is server, dividing tasks between computers on which SL3Client application is running.

http://www.servmg.com/uploaded/sl3cloud/sl3cloud.png

How does it work?

On Super PC, which is used to count and has the appropriate graphics card, install SL3Client which communicates with the server every few seconds. Serwer is executing all the work with dividing and checking whether the code is counted. We manage the whole process through the site http://servmg.com/:

• adding logs
• import from .sha/.log/.fnx/.bcl* files
• setting the queue
• grabbing the results
• adding new PCs
• monitoring PCs states
• notification by mail *
• calculation result sending via e-mail *

The system can connect up to 1,000 computers. Work on the calculation of one code is divided into 100 or 200 or 500 or 1000 pieces. So small parts are sent to each PC, when one PC calculates its part tells the server about the result, if the code is not found, it retrieves the next part of the counting. If, however, the Pc found the code - the server immediately stops counting on the other PCs and sends them the next parts of another hash.

How do I start?

• Download SL3Client application
• Unpack it in the same folder as oclHashcat-lite v0.06
• Logo on http://servmg.com/pl/hcloud/, You have to accept the rules of application - there must be file: EULA.accepted in the folder
• Run SL3Client - it will generate HW Key (the unique number for every PC)
• On the site click Drone add URL, paste HW Key, add descripton of PC (for example: PC in a green housing) and select the system and type of cards you have in this PC
• There (on the site) will be generated a KEY to paste into SL3Client
• It's better to select autostart option(eg after a power failure the program automatically starts up and begins to count)
• Immediately after starting SL3Client will connect to the server and check if there is some hash in the queue
• To stop counting on your PC you should close the application

The biggest advantages of our application are:

• It does not matter how many Super PCs you have
• It does not matter how "strong" Super PCs are
• You can always add more Super PC (even during the counting of some hash)
• You do not need another computer that works as a server
• The fastest algorithm v0.06
• It does not matter the location of PCs - they can be even on other continents;)
• You do not need to have a constant external ip, or run VPNs
• x32/x64 and ATi/nVidia Cards support

F.A.Q.

What if the PC took the job to count, but is, for example, suspended?

The server periodically checks to see if the task (that was sent) is still counted. Jf the job has been sent to a PC and no response came, then this task will be sent to another free PC.

Can 2 PCs get the same task?

Each task (part of the hash) is sent to only one PC. An exception is when the job was sent but there is no communication with Pc for a long time, then the task is sent to another PC.

What is the difference between the division into 100/200/500/1000 parts?

When we have strong PC (~ 8000MH) we select 100, we will lose less time when sending new tasks. The times are about 1.5 seconds to reload task. The advantage of sharing a larger amount of parts is that the progress on the site is frequently updated.

When the progress on the site is updated?

Progress is updated only when the PC calculates the whole job he got, then sends info that there is or there isn't a code in this peace. It may happen that for some time the progress is stoped and then suddenly jump significantly. It can happen when several PCs ended the task and sent info to the server.

In what format the result is given?

When the counting is completed, there is a .COD file for download on the site. This file can be conwerted to NCK in a few seconds using any box (MX-Key/Cyclone/ATF/FenixKey).

Do I need internet connection on Super Pc?

Yes, stable internet connection is necessary. It can be slow but stable.

Can I have one cloud of Super PC from different locations?

Yes. It does not matter where the PC is connected to the cloud! They may even be on different continents, it's important just to have access to the Internet.

How to move logs in the queue?

Just click on the ID of the hash, hold down and drag anywhere in the queue.

Screenshots:



http://www.servmg.com/uploaded/sl3cloud/sl3cloud1s.png http://www.servmg.com/uploaded/sl3cloud/sl3cloud2s.png http://www.servmg.com/uploaded/sl3cloud/sl3cloud3s.png http://www.servmg.com/uploaded/sl3cloud/sl3cloud4s.png http://www.servmg.com/uploaded/sl3cloud/sl3cloud5s.png
http://winiu.com/support/sl3client/shot_000002s.png

Download Client Software:
SL3Client.exe (1.1.12.118)

Dowload:
oclHashcat-lite v0.06

MSM SL3 Status for Android:
HcloudStatus.apk
http://winiu.com/support/sl3client/link.png

PRICE:
At the moment, addition is FREE for all users of MSM.

Any questions?
Sonork: 100.1581690

Some one can ask, why now ? We have written so we give it ;) !

BIG Thanks for mr. atom !
oclHashcat-lite - advanced password recovery

inspired by Mr.Ultimate - Thanx

Updates:


31.10.2011

• Added import from file (Known formats: .log .sha .fnx .bcl)
• Added timer, showing when he made ​​another phone added (Average speed from last 10 phones / phones in queue - current progress) You can easily add this info to your own web using <iframe>.
• New version Android app, is show how much logs is in queue, curent progres and time to finish last log.

http://winiu.com/support/sl3client/sl3cloud7.png
http://winiu.com/support/sl3client/shot_000003.png

SL3 BruteForce Cloud System 16.11.2011 - Update

• Added AUTO NCK Calc - after BF finish you will se COD file and after 1 min ALL 7 NCK codes rady to enter
• Add second COD file format - for MX Users
• In client software introduced few small fix (ver.1.3.17.128)

SL3 BruteForce Cloud System 24.11.2011 - Update

• New version SL3 Client: 2.0.21.139
• Add GPU Watchdog setting for each drone. Default is off (Watchdog=0).
• Less CPU usage - now works correctly on one core cpu
• Fixed speed, now is litle bit faster.
• Add auto NCK sending via mail after finish (bafore in mail was .cod file) Mail can be in on of 14 language.
• Add edit drones.

If before you use version older then 1.3.17.128 your hw key will change. New hwkey you can add in drones tab using edit just click on drone name.

Download: Client 2.0.21.139

SL3 BruteForce Cloud System 24.11.2011 - Update

• New version SL3 Client: 2.0.21.139
• Add GPU Watchdog setting for each drone. Default is off (Watchdog=0).
• Less CPU usage - now works correctly on one core cpu
• Fixed speed, now is litle bit faster.
• Add auto NCK sending via mail after finish (bafore in mail was .cod file) Mail can be in on of 14 language.
• Add edit drones.

If before you use version older then 1.3.17.128 your hw key will change. New hwkey you can add in drones tab using edit just click on drone name.

Download: Client 2.0.21.139

Update 23.12.2011

• New Client for Linux version: 1.0beta
• Add multiple e-mail sending, just separate adres ";" when you add hash example: examlpe@example.com; exem2@example3.com
• Add support for import new SHA file format
• Displays longer description on the list

Screen:

http://winiu.com/support/sl3client/20111223-112655.png

=========================
hcloud-drone installation
=========================

1. Place ``hcloud-drone`` and ``config.yml`` in same directory as ``*hashcat-lite*.bin``.


2. Open terminal and run ``hashcat`` manually to accept EULA, e.g.::

oclHashcat-lite32.bin -n 800 -m 1900 -1 00010203040506070809 450CC90B201568478F48A19721811D976A56950C:003573980 418839600 ?1?1?1?1?1?1?1?1?1?1?1?1?1?1?1

After typing ``YES`` press ``q`` to quit hashcat.


3. Register drone by visiting *Drone add URL*. You can check HW Key by runing in terminal::

./hcloud-drone -w

After registering save key into drone config by runing in terminal::

./hcloud-drone -k KEY

(put key generated on register page in place of ``KEY``)

Your drone is ready to go, you can run it in terminal::

./hcloud-drone


Reporting bugs
--------------

If you wan't to report bug please run drone in debug mode::

./hcloud-drone -d

When reporting errors please atach debug.log and message.log to bug report (zip it or cut file to only last 100 lines or so).


Compatibility
-------------

If you're able to run hashcat on linux machine, hcloud-drone should work.

hcloud-drone was tested on:
Ubuntu 10.10 OCL
Ubuntu 11.04 CUDA


Known issues
------------

At this moment hcloud-drone doesn't report speed to server. It will be added within few days from this release.

hcloud-drone must have ifconfig and udevadm installed, as well as physical drive (sda1 or hda1) to guarantee HW Key uniqueness if you're runing diskless cluster, please contact us so we could work it out.

Update 16.01.2012

• Add calc method 0 - 100 %
• Add calc method 100 - 0 %
• Add calc method Random - this has been used so far

Now you can decide which method of counting is better for you, individually for each HASH.



You want test our Cloud System for FREE ? Send PM with your e-mial and get FREE Activation !

Update 03.02.2012

• New Client for Linux 1.0.6
• Now show calc speed
• Few little bugs fixed

MSM_client_version: 1.0.6 - 32bit
MSM_client_version: 1.0.6 - 64bit

Update 06.02.2012

• OCL 0.09 Full Suported
• New AMD 7xxx GPU platforms support
• More about new version OCL...

How to update ?

1. Download OCL 0.09
2. Download and update drivers 12.1 and SDK 2.6 inside
3. Extract OCL and accept EULA, just run oclExample.cmd
   if you have 32 bit system edit oclExample.cmd and replace
   oclHashcat-lite64.exe 9b957cc6ab97cbf88c4f6f0f146adafe
   to
   oclHashcat-lite32.exe 9b957cc6ab97cbf88c4f6f0f146adafe
4. After "YES" close OCL
5. Put last Client Softwere in OCL folder
6. Go to Drones tab in MSM and change "Hashcat version:" to : 0.9
7. Start Client

In theory you can MIX PC's with OCL 0.08 and 0.09 in one cloud. But we suggest use the same version in one cloud.


THANKS and ALL THE HONNOR GOES to atom!

Update 21.02.2012

• Creating account for customers
  Now you can create accounts for your clients with sufficient amount of credits which allow them to add hashes to the queue – you will save time
  
  
• End customer can add hashes to count
  
  
• Checking the waiting time for calculation of a specific IMEI / hash
  Now the client can check the expected time of his code calculation.
  Martech Service Manager
  The time is approximate and statistically calculated based on the time of recently completed hashes and % of the current.
  
  
• Changed the field where you enter the email address (email to which the calculation result should be sent)

How does it look In practice?

1. You create an account for your customer with the specified limit of logs which he can add
   Tools >> User Manager >> +
2. Customer has access to a simplified version of MSM where he can
   add/remove IMEI/hash
3. The hash will be calculated when it turn comes

http://winiu.com/support/sl3client/msm_add_user.jpg


FAQ:

• The customer can remove mistakenly addend hash and the credit will be refunded automatically, this applies only to hashes whose calculation does not start. If you remove already counted hash your credit will not be refunded.
• The customer sees only his hashes
• The customer can not change the order in the queue
• The cloud admin can change the order of hashes added by the customer
• The admin sees (on the waiting list) the description added by customer and info which user added this
  http://winiu.com/support/sl3client/m...ame_onlist.jpg
• You can create 3 kinds of MSM access accounts:
  
  • Customer will only see hashes he added
  • Manager can see all hashes and can reorder/remove them
  • Administrator can manage all SL3 Cloud options
  
  
• The customer sees how many credit he have left
  
  http://winiu.com/support/sl3client/msm_credits_see.jpg

[B][SIZE=3]As a result, MSM becomes a maintenance-free for the owner :)

Next updates soon... :)

Update 28.02.2012

• New Client 3.0
  
  
  • Installer version, included OCL 0.09, you can also download 0.08 version
  • Auto update Client, this is the last time you have to update the client manually
  • Auto update OCL version on all PC’s
  • Card drivers auto update will be ready soon
  
  
• New option in Drone edit
• A faster way to reload jobs
• Fixed litle bugs

http://winiu.com/support/sl3client/msm_client_30.png

We suggest installing Client in c:\SL3Client\. Please don’t install in folders protected by Windows like "Program Files" (auto update may not work properly).


How to update (last time manual):

• Download Client 3.0 Insatall pack
• Start install pack and select OCL ver which you want to use (0.09 requires Drivers 12.1 32bit or 12.1 64bit)
• Start Client and accept hashcat EULA - just enter YES
• Pastle Autorization KEY from drones tab (to copy to clipboard KEY click on KEY Icon)
• That is all
• Next time, to update the client, just click in drones tab “new version” and the client or OCL will update automatically

Of course the client will wait with auto update until the job is finished, so you won’t loos the calculation time :)

http://winiu.com/support/sl3client/m...autoupdate.jpg

Example:
If you don’t have drivers 12.1 and you don’t have time now to update it, install new client with OCL 0.08. As soon as you have time, you will update drivers and using Drones Tab change OCL to 0.09 with a few clicks. The rest will update automatically (you have to accept EULA).


Links:

• MSM SL3 Cloud Client 3.0
• ATI Drivers 12.1 32bit
• ATI Drivers 12.1 64bit

• Add Statistic Tab (Total/Month/Day)
  
• New Android: MSM Sl3 Cloud Status
  Now you can download it from Google Play

Update 08.08.2012

• New method NCK calc - now NCK will show direct after COD found.
  
  No more waiting for NCK codes http://forum.gsmhosting.com/ubb/smile.gif

You want TEST our Cloud System for FREE ? Send PM with your e-mial and get FREE Activation !

Update 19.12.2012

MSM SL3 Cloud Monitor for iPhone, this addition is of course free

iPhone app to monitoring system and PC's and show how much logs is in queue, curent progres and time to finish last log.

http://winiu.com/msm/msm_iphone1.jpghttp://winiu.com/msm/msm_iphone2.jpg

You can find it in AppStore searching as: MSM SL3 Cloud Status

http://winiu.com/msm/msm_iphone.jpg

OCL 0.8, 0.09 and 0.10 don't work in 2013 year, and we have already seen http://forum.gsmhosting.com/ubb/wink.gif

Fix to it is chcange date to 2012 on pc or change OCL exe files.

To make it easy we add option in drones edit tab:
http://winiu.com/msm/2013fix1.jpg

If you check this option and click save (one time). Client on this pc after finish current job will download fixed EXE from server and replace it on pc.

IF you use 0.09 before all will work automatic. If you use older version before you must say YES in EULA window on this pc.

You can do this job for all your PC one time, just click:
Force Hashcat reinstall on all drones
http://winiu.com/msm/2013fix2.jpg

If you upgrade OCL from 0.08 or older check all your pc after that.
Don't forget that OCL0.09 need accept EULA and new drivers.

Update 22.04.2013

• Add in Statistic Tahttp://srimeenakshimobiles.com/forum...es/bebored.gif Total customer credits
• API: check repair statusMartech Service Manager API ? Service Manager Documentation

ATTENTION! Use only the software from our websites: sl3tool.com or Martech Service Manager or Martech . In the network, there is a virus that simulates our client and steals passwords. We remind that the latest version of MSM Client is 3.0!

http://winiu.com/msm/msm_bitcoin_2.png
BTC & LTC Mining in MSM Cloud System - Beta

Don't waste your money if your computers don't have anything to calculate!

Now, using MSM, you can extract Bit Coin (BTC), LitleCoin (LTC) or other virtual currency.

Version 3.1 does not change anything in SL3 counting process. The changes apply only to BTC / LTC diging and are in BETA version!

This update is free for all users at the moment.

FAQ:
What is Bitcoin - BTC


How does it work (in brief):

1. Open an account in any mine, there are hundreds of them, for example "CoinTrone", "Slush Pool"
2. Create miners accounts - separate account for each drone,
3. Enter account data in drone settings (host, username, password),
4. In drone settings, change the client version to 3.1 - it will be automatically updated on SuperPC,
5. Select CGminer version. Maximum available version recommended - automatically updates on SuperPC,
6. Choose what you want to calculate (http://servmg.com/en/ownerdetails/), the options are:
   
   • Only SL3
   • Only BTC
   • Only LTC
   • BTC When there is no queue SL3
   • LTC when there is no queue SL3
   
   
7. When you dig any coins you will see them in your mine account
8. You can upload them to your account at any counter, for example vircurex.com or bitcurex.com and replace them to $ or another currency and then send it to your bank account.

Use CGMiner application for digging. Sl3 client will start CGMinera will start CGMiner when needed with appropriate parameters. More about CGMiner you will learn here:
https://bitcointalk.org/index.php?topic=28402.0

Here, we'll show you how to set PC 2xHD7970 at mine Cointrone and currency Bitcoin:

1. Create an account: https://coinotron.com/coinotron/Acco...ction=register
2. Add Worker:
   
   • User: winiu.msm_sample1
   • Pass: msm1234
   • Coin: BTC
   • Payment mode: RBPPS
   
   http://winiu.com/msm/msm_btc_addworker.jpg
3. Edit drone and set:
   
   • Client version: 3.1
   • Cgminer version: 3.3.0
   • BitCoin mine URL: stratum+tcp://coinotron.com:3333
   • BitCoin mine username: winiu.msm_sample1
   • BitCoin mine password: msm1234
   • BitCoin cgminer gpu-clock: 1050 {set the same as for SL3}
   • BitCoin cgminer gpu-memclock: 900 {set the same as for SL3}
   • BitCoin cgminer gpu-fan: {zostaw puste}
   • BTC cgminer extra commands: -I 15
   
   http://winiu.com/msm/msm_btc_editdrone.jpg
4. Save, after that on super PC MSM SL3 Client will make auto update, just give him litle time, it will reboot client fiew time, thats normal, just wait
5. Do the same for all the PCs that you have, a separate worker account for each PC, will be easier to control but you can use the same user for all drones
6. Choose what you want to calculate in your cloud : http://servmg.com/en/ownerdetails/
   BTC if no hashes queued or BTC if u want to test
   http://winiu.com/msm/msm_btc_select.jpg
7. After updating SL3 client and CGMiner and when the SL3 queue ends or you choose only BTC, MSM SL3 Client will starts CGMiner and digginf will start.
8. Extraction can be followed on Cointrone site (data: speed and extraction refresh every 20 minutes)

If everything is set correctly:
- GPU usage 99%
- (AGV): ~ 1.25Gh / s (2x HD7970 Core 1050 Memory: 900)
- HW: 0
http://winiu.com/msm/msm_btc_miningondrone.jpg

After some time, the speed of drone should also appear on the Cointrone site - about 20 minutes.
http://winiu.com/msm/msm_btc_cointrone_speed.jpg

Info about LTC and other option soon...