Step by Step HOW TO USE MCNpro Box (Details with Picture)

[maverick_lp28]

I.Instalation main software McnPro Box

1.Double click on the setup Mcnpro to start the installation 2.7.6a for main software box MCNpro.For update installer McnPro Box just visit here


2.Click Next to continue the installation process


3.in *******r Information, please insert the activation code same with listed in the your MCNprobox


4.In select Installation Folder just click Next To instal in this Folder


5.Click Instal for begin installation


6.Please waiting process and then click Finish for the end of installation


Next..............

[maverick_lp28]

II.Connect the McnPro Box with Computer

1.First, plug in the cable adapter included in the package to McnPro Box


2.Then plug the USB cable to McnPro Box


3.Also then press the red button to the box to turn on mode


4.search drivers in address location C: \ Program Files \ Mcnbox team \ Mcnpro box \ Drivers \ Box drivers and then click OK


5.Just Wait for Instalation driver untill finish


Next..............

[maverick_lp28]

III.How to Flashing via McnPro Box

1.Plug the cable Flash to the Service Cable into McnProBox


2.Please insert cable Flash into the phone and the box


3.Connect the cable power into the phone as the correctly one


4.Double-click icon Mcnpro Box to start run the program


5.Click connect to see the connection box and computer


6.When see some a notification message box connected, that box
and computer already connected well


7.Select RX option, TX scan to see the pins and type CPU


8.In menu Select Chip, select ALL and then click Start to automatically detected type of CPU used by the mobile phone.


9. Scan messages result shows CPU Chipset MTK MT6225 ...
indicates the phone CPU type is MTK.


Next.....................

[maverick_lp28]

10.If the pin flash cable being used is detected as well, Then the cable type selected Flash is correct, just klik Apply to continue


11.Click Open to choose the firmware


12.Get the firmware as the correctly one's


13.click flash to start run the flashing process


14.Please try to shocked on the phone


15.Just waiting process flashing untill finish


16.Till there's some a notification message appear Write OK!


17.Just Click unlock for finishing


Hopely this usefull for new user McnPro Box...
Just wanna share

Br,

[noersalvia]

thanks bos good share