Medusa / Medusa PRO Box Updates Here

[Service Team]

Medusa Box Software v.2.4.9 Release Notes:

• Added support for the following models:
  
  • LG D851 - added Dead Boot / Device Repair via USB
  • LG D620 - added Dead Boot Repair via USB
  • LG D620K - added Dead Boot Repair via USB
  • LG D620R - added Dead Boot Repair via USB
  • ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)
  
  
• Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Medusa Box Software v.2.4.9

[sdtelecom]

Medusa Box v.2.5.0 is out!

We have added boot repair (all in Test Mode) via USB and small TP for LG G3 D852, D852G, D855, D855K and D855P.

Medusa Box v.2.5.0 Release Notes:

- Added support for the following models:
LG D852 - added Dead Boot Repair via USB (Beta)
LG D852G - added Dead Boot Repair via USB (Beta)
LG D855 - added Dead Boot Repair via USB (Beta)
LG D855K - added Dead Boot Repair via USB (Beta)
LG D855P - added Dead Boot Repair via USB (Beta)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the three next steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)


Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa Box v.2.5.0

[Service Team]

Medusa Box Software v.2.5.1 Release Notes:

• Added support for the following models:
  
  • LG F160LV - added Dead Boot / Device Repair via USB
  • LG F160K - added Dead Boot Repair via USB
  • LG F160S - added Dead Boot Repair via USB
  • Huawei E171 (CPU: HiSilicon HI6731) - added Dead Boot / Device Repair via JTAG
  • ZTE P752D - added Dead Boot/Device Repair via JTAG (thanks to Mr. Dr_Wolodya)
  
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Medusa Box Software v.2.5.1

[Service Team]

Medusa Box Software v.2.5.2 Release Notes:

• Added support for the following models:
  
  • LG F160LV - added Dead Boot/Device Repair via JTAG
  • LG F160K - added Dead Boot Repair via JTAG
  • LG F160S - added Dead Boot Repair via JTAG
  • LG F370K - added Dead Boot Repair via USB
  • LG F370L - added Dead Boot Repair via USB
  • LG F370S - added Dead Boot Repair via USB
  
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Medusa Box Software v.2.5.2

[sdtelecom]

Medusa Box v.2.5.3 is out!

We have added Boot Repair via USB and small TP for LG VS930 and LG F160L
and via JTAG for TeXet TM-3200R, Crius Q7A and Huawei G520-0000!

Medusa Box v.2.5.3 Release Notes:

- Added support for the following models:
LG VS930 - added Dead Boot Repair via USB
LG F160L - added Dead Boot Repair via USB
TeXet TM-3200R - Dead Boot / Device Repair via JTAG (thanks to mr. Drunya_L)
Crius Q7A - Dead Boot / Device Repair via JTAG (thanks to mr. DZ_Developer)
Huawei G520-0000 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG VS930 and LG F160L via USB, please follow the three next steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Medusa Box v.2.5.3

[sdtelecom]

Medusa Box v.2.5.4 is out!

We have added Boot Repair via USB and small TP for LG D165G, LG D415RD, LG VS870
and via JTAG for HTC HD7 (PD29100) and Huawei E586!

Medusa Box v.2.5.4 Release Notes:
- Added support for the following models:
LG D165G - added Dead Boot Repair via USB
LG D415RD - added Dead Boot Repair via USB
LG VS870 - added Dead Boot / Device Repair via USB
HTC HD7 (PD29100) - added Dead Boot Repair, Repair IMEI, Repair CID, Read Codes via JTAG (thanks to mr. Chromgsmunlock)
Huawei E586 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)


To repair LG D165G, LG D415RD and LG VS870 via USB, please follow the three next steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa Box v.2.5.4

[Service Team]

Medusa Box Software v.2.5.5 Release Notes:

• Added support for the following models:
  
  • LG P930 - added Dead Boot Repair via USB
  • LG LU6200 - added Dead Boot Repair via USB
  • HTC One M7 (PN0720000) - added Dead Boot Repair, Repair IMEI, Repair CID via JTAG
  • Huawei Y300-0000 - added Dead Boot Repair via JTAG (thanks to Mr. Dr_Wolodya)
  
  
• All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair LG P930 and LG LU6200 via USB, please follow the next three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or"Unknown Device" if you hadn’t installed the driver yet. Drivers are in{Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Medusa Box Software v.2.5.5

[sdtelecom]

Medusa Box v.2.5.7 is out!

We have added Boot Repair via USB and small TP for LG E970, LG H220 and via JTAG for Huawei G525-U00, HTC One M7 (PN07110)!

Medusa Box v.2.5.7 Release Notes:
- Added support for the following models:
LG E970 - added Dead Boot Repair via USB
LG H220 - added Dead Boot Repair via USB
Huawei G525-U00 - added Dead Boot / Device Repair via JTAG
HTC One M7 (PN07110) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG E970 and LG H220 via USB, please follow the three next steps:
Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)




http://www.youtube.com/watch?v=gb5wt_Lmxwc

http://www.youtube.com/watch?v=N--ZDt2aAU8


Download Medusa Box v.2.5.7

[shaiksha85]

Medusa Box v.2.5.9 is out!

Here is the small update, while we are focused on bigger things.. We're not dead, we're not sleeping. We're working!
Today we have added support for Samsung Galaxy S4 Mini, Samsung Galaxy Pocket Plus, Huawei Ascend Y200 and HTC Titan!

Medusa Box v.2.5.9 Release Notes:

Added support for the following models:

• - Samsung SPH-L520 - added Dead Boot / Device Repair
• - Samsung GT-S5301L - added Dead Boot Repair
• - Huawei U8655-1 - added Dead Boot Repair
• - HTC Titan (PI39110) - added Dead Boot Repair, Repair IMEI (in Test Mode), Repair CID (in Test Mode)
• - Added new Core ID (ID: 706B40E1) for MSM8960 CPU
• - All pinouts and Repair procedures described in the manual ("Help" button in the Software)

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.5.9

[shaiksha85]

Medusa PRO v.1.0.1 is out!

Added support for Samsung SPH-W2700 and SKY IM-S315L

Medusa PRO v.1.0.1 Release Notes:

- Added support for the following models::

• Samsung SPH-W2700 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• SKY IM-S315L - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

- Added new Core IDs for Qualcomm CPUs
- Fixed minor issues with Downloads
- Removed download limit
- All pinouts and Repair procedures are described in the manual ("Help" button in the Software)

IMPORTANT: In order to use Medusa Software you need to install the latest Software version (v.2.6.1)

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa PRO Software v.1.0.1

[shaiksha85]

Medusa PRO v.1.0.2 is out!

We have added support for Samsung SCH-W690, SKY IM-R520S, SKY IM-U310, LG D486, LG H788 and more!

Medusa PRO v.1.0.2 Release Notes:

- Added support for the following models via JTAG:

Samsung SCH-W690 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
SKY IM-R520S - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
SKY IM-U310 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

- Added support for the following models via USB:

LG D486 - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
LG H788 - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files

IMPORTANT: We recommend to uninstall old Software version, before the installation of the latest one.

- Updated Medusa Flasher for work with new Smart Card firmware version.
- Added "Qualcomm HS-USB QDLoader 9008" drivers for Windows 8/10.
- All necessary drivers will be available in installation folder.
- Fixed issues with view of Help and pinouts.
- All pinouts and Repair procedures described in the manual ("Help" button in the Software).

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa PRO Software v.1.0.2

[shaiksha85]

[INDENT][FONT=Tahoma]Medusa PRO v.1.0.5 is out!

We have added a lot of new features and support for Samsung Galaxy Nexus, Samsung Galaxy S3 Duos, Samsung Galaxy Core Prime, LG G Vista, LG G4!

Medusa PRO v.1.0.5 Release Notes:
- Added following features for work with eMMC:

• Read/Write/Erase eMMC Boot area partition 1
• Read/Write/Erase eMMC Boot area partition 2
• Added output of detailed information about eMMC chip into the software log (CID, CSD, EXTCSD Info)
• Added auto-backup of EXT_CSD data during the “Connect” operation into "EXT_CSD Backups" folder

- Uploaded "Boot area partition 1" dumps/files for the following models into the Support Area:

• Samsung GT-I9300
• Samsung GT-N7108
• LG D335

- Added support for the following models via eMMC:

• Samsung GT-I9250 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-I9300I - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SM-G360G - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D631 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H815 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

- Updated help and pinouts in Smart Repair Files for the following model (please uninstall old SRF file, download and install new one):

• LG LS996

- Added software logs auto-backup into the "Logs" folder
- Fixed problem with displaying Unicode characters in software log
- Fixed issue with incorrect flash chip size detection (when flash chip size is less than 4GB)
- Improved option to continue read into the same file from the moment of interruption, then “Read” operation was not completed
(software was closed or stopped responding, PC suddenly shuts down, etc.)
- Improved software stability
- Some GUI changes
- All pinouts and Repair procedures described in the manual ("Help" button in the Software)

Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa PRO Software v.1.0.5

[Service Team]

Added support for the following models via eMMC:


Samsung GT-I8200N - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Samsung SM-G530P - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG D320N - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG D325 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG F100S - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
LG LS885 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Added support for the following models via USB:
LG F240K - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
Added ability to Read/Write EXT_CSD
Added ability to include Boot1 and Boot2 into SRF and to write these partitions during Smart Repair
All pinouts and Repair procedures described in the manual ("Help" button in the Software)

[shaiksha85]

Medusa PRO v.1.0.7 is out!

We have added support for LG Optimus L7 II Dual, LG Optimus L9 II, LG L70 Dual, LG G2 Mini and LG G4s Dual!

Medusa PRO v.1.0.7 Release Notes:

- Added ability to edit CID registry (Device identification register) for Samsung eMMC flash chips
- Added ability to configure eMMC bus frequency
- Added support for the following models via eMMC:

• LG P715 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D605 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D325 (Hynix) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D625 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H734 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

- Firmware of Medusa box has been updated! To update the firmware, please connect the box and only then run the Software
- All pinouts and repair procedures described in the manual ("Help" button in the Software)

Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa PRO Software v.1.0.7

[shaiksha85]

Medusa PRO v.1.0.8 is out!

We have added support for Samsung SM-G360P, SM-G360T, GT-I9506, GT-S7275Y, GT-P5100 and LG H631!

Medusa PRO v.1.0.8 Release Notes:

- Added support for the following models via eMMC:

• Samsung SM-G360P - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SM-G360T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-I9506 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-S7275Y- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-P5100 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H631- Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

- All pinouts and repair procedures described in the manual ("Help" button in the Software)

Medusa - Ultimate Breakthrough in the Phone Repair!

Download Medusa PRO Software v.1.0.8