Medusa / Medusa PRO Box Updates Here

[maverick_lp28]

Version 1.0.1 – Added dead boot repair for LG SU130, LG KU4000, Samsung SPH-W8400, Samsung SCH-W560!

Medusa Box v. 1.0.1 is out! We have added dead boot repair for LG SU130, LG KU4000, Samsung SPH-W8400, Samsung SCH-W560 and fixed repair files for Huawei U1000s and Huawei U120s.

To resurrect devices perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in the manual;

• Connect battery;

• Make sure that correct model has been selected from the models list;

• Set Jtag speed to Auto (RTCK);

• Select the EasyRepair mode;

• Press the EasyRepair button and follow Wizard instructions;

• After operation is successfully finished reconnect the battery and put the phone into the Emergency mode to make sure that it has been recovered;

• Desolder JTAG wires.

To put SU130 into the Emergency mode perform the following steps:

• Reconnect battery;

• Press and hold "Call" + "Power ON" keys;

• Connect a USB cable;

• Make sure that new device appears in PC Device Manager.

To put KU4000 into the Emergency mode perform the following steps:

• Reconnect battery;

• Connect USB cable;

• Press and hold "2" + "5" + "Power ON" keys;

• Make sure that new device appears in PC Device Manager.

To put Samsung SPH-W8400 or Samsung SCH-W560 into the Emergency mode perform the following steps:

• Reconnect battery;

• Press and hold "4"+"Power ON" keys;

• Connect USB cable;

• Make sure that new device appears in PC Device Manager.

Download link:

• Medusa Box 1.0.1

BR,
Medusa Team

[maverick_lp28]

Medusa Box v. 1.0.2 is out! We have added dead boot repair for LG P350, P350GO, Samsung Z300, U700 andZTE MF626.

To resurrect devices perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in the manual;
• Make sure that correct model has been selected from model list;
• Set Jtag speed to Auto (RTCK);
• Select EasyRepair mode;
• Press EasyRepair button and follow Wizard instructions;
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered;
• Desolder JTAG wires.

To put LG P350 or LG P350GO into the Emergency mode perform the following steps:

• Reconnect battery;
• Press and hold "Vol+" + "Vol-" + "Power ON" keys;
• Connect USB cable;
• Make sure that new device appears in PC Device Manager.

To put Samsung Z300 or Samsung U700 into the Emergency mode perform the following steps:

• Reconnect battery;
• Press and hold "9" + "Power ON" keys;
• Connect USB cable;
• Make sure that new device appears in PC Device Manager.

Download link:

• Medusa Box 1.0.2

BR,
Medusa Team

[maverick_lp28]

Medusa Box v. 1.0.3 is out! We have added dead boot repair for LG SU920, KU9200, SH810 and KH3400.

To resurrect devices perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in the manual;
• Make sure that correct model has been selected from model list;
• Set Jtag speed to Auto (RTCK);
• Select EasyRepair mode;
• Press EasyRepair button and follow Wizard instructions;
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered;
• Desolder JTAG wires.

To put LG SU920 or LG KU9200 into the Emergency mode perform the following steps:

• Reconnect battery;
• Connect USB cable;
• Press and hold "Call" + "Power ON" keys;
• Make sure that new device appears in PC Device Manager.

To put LG SH810 or LG KH3400 into the Emergency mode perform the following steps:

• Reconnect battery;
• Connect USB cable;
• Press and hold "2" + "5" + "Power ON" keys;
• Make sure that new device appears in PC Device Manager.

Download link:

• Medusa Box 1.0.3

BR,
Medusa Team

[maverick_lp28]

Medusa Box v. 1.0.4 is out! We have added repair for ZTE K3765-Z, ZTE MF622, Huawei K3765 modems and dead boot repair for Samsung SGH-I900, SGH-I908 PDA Part!

To resurrect the mentioned above models perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in the manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to Auto (RTCK); (1 MHz for I900-I908).
• Select EasyRepair mode.
• Press EasyRepair button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

Download link:

• Medusa Box 1.0.4

BR,
Medusa Team

[maverick_lp28]

Medusa Box v. 1.0.5 is out!

We have added support for the following models:

• HTC HD2 – added EasyRepair and Advanced modes.

• HTC ELF – added EasyRepair mode only (Download mode enable).

• LG SH170 – added EasyRepair and Advanced modes.

• Samsung SGH-I900, SGH-I908 MSM part – added EasyRepair and Advanced modes.

• Samsung SGH-Z140 – added EasyRepair and Advanced modes.

To resurrect the mentioned above models perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.

• Make sure that correct model has been selected from model list.

• Set Jtag speed to Auto (RTCK); select 1 MHz or more for HTC Elf (depends on connection quality).

• Select EasyRepair mode.

• Press EasyRepair button and follow Wizard instructions.

• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.

• Desolder JTAG wires.

HTC HD2 Repair files:

• "HTC_HD2_Europe_Repair.mf" - European boot version (SPL 3.03.0000);

• "HTC_HD2_USA_Repair.mf" - USA boot version (SPL 2.10.0000);

• "HTC_HD2_HSPL_Repair.mf" - Universal CID-unlocked boot version (HSPL 3.03.0000).

Download link:

• Medusa Box 1.0.5

BR,
Medusa Team

[maverick_lp28]

Medusa Box v.1.0.6 Release Notes:

• Added support for Qualcomm Snapdragon QSD8650 Mobile processor.

• Added EasyRepair and Advanced modes for the following models:
  
  • LG SU630,
  • LG KU6300,
  • LG LU2300,
  • LG SU950,
  • LG SH400,
  • LG P506,
  • LG P506GO,
  • LG P505,
  • LG P505R,
  • LG P350G,
  • Samsung SCH-W390.

• Improved support for Qualcomm MSM72XX and QSD8250 Mobile processors.

To resurrect these models perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to Auto (RTCK).
• Select EasyRepair mode.
• Press EasyRepair button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

Download link:

• Medusa Box 1.0.6

BR,
Medusa Team

[maverick_lp28]

Medusa Box v.1.0.7

With this update the number of supported LG phone models has exceeded 90!


Medusa Box v.1.0.7 Release Notes:

Added EasyRepair and Advanced modes for the following models:

• LG L600i
• LG L704i
• LG L705i
• LG L705ix
• LG L706ie
• Samsung SCH-W240
• Samsung SCH-W350
• Samsung SCH-W830
• Samsung SPH-W9500
• Samsung SPH-W8300

To resurrect these models perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to Auto (RTCK).
• Select EasyRepair mode.
• Press EasyRepair button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

Note! With Medusa Box you don't have to use any "fantastic" pinfinder devices or solder 20 wires!
We present end-user's solutions for resurrection of your devices – ready to use, tested, and with 100% working Jtag testpoint's pictures, easy step-by-step manuals and repair files!

Download Medusa Box 1.0.7

We prepared some video manuals on using Medusa Box.

Video manual 1 – Repairing Samsung SPH-W8300 with Medusa Box:



Video manual 2 – RepairingLG L600i with Medusa Box:



Download link:

• Medusa Box 1.0.7

BR,
Medusa Team

[maverick_lp28]

Medusa Box v.1.0.8 Release Notes:

• Added support for Qualcomm MSM7225 mobile processor.

• Added EasyRepair and Advanced modes for the following models:
  
  • HTC Desire
  • HTC Wildfire
  • Samsung SCH-W590
  • Samsung SPH-W4200
  • Samsung SPH-W5000

• Added repair IMEI for the following models:
  
  • HTC Desire
  • HTC Wildfire

To resurrect these models perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to Auto (RTCK).
• Select EasyRepair mode.
• Press EasyRepair button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

We present ready to use, tested end-user solution with 100% working Jtag testpoint's pictures, easy step-by-step manuals and repair files meant for resurrection of your devices!

Download link:

• Medusa Box 1.0.8

BR,
Medusa Team

[shaiksha85]

Version 1.0.9 – Added support for LG, Huawei, ZTE, Samsung devices!

Medusa Box v.1.0.9 Release Notes:
Added EasyRepair and Advanced modes for the following models:

• LG KU9500
• LG L852i
• Samsung SPH-W2900
• Samsung SCH-W290
• Huawei E583c
• ZTE MF632
• Siemens SXG75

To resurrect these models perform the following steps:
Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select EasyRepair mode.
Press EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.




Download Medusa Box v.1.0.9

[shaiksha85]

Medusa Box Version 1.1.0 has been releasaed. In this version we have added support for some HTC, Huawei, Samsung devices!

Medusa Box v.1.1.0 Release Notes:

Added support for OneNAND flash devices on Oualcomm MSM 62XX.
Added EasyRepair and Advanced modes for the following models:

• HTC P3700 Touch Diamond
• Samsung SGH-F480
• Samsung SPH-W9100
• Huawei E272

To resurrect these models perform the following steps:
Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select EasyRepair mode.
Press EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box 1.1.0

[shaiksha85]

Version 1.1.1 – Added support for new LG, Samsung and HTC devices!
Medusa Box v1.1.1 Release Notes:

• Added support for Marvell PXA270 Application processor.
• Fixed some stability issues on slow computers.
• Fixed flash erase bug on some Qualcomm MSM62xx processors.
• Added support for the following devices:
  
  • Samsung SGH-I710 – EasyRepair mode.
  • Samsung SGH-I718 – EasyRepair mode.
  • Samsung SCH-W270 – EasyRepair and Advanced modes.
  • LG LV7400R – EasyRepair and Advanced modes.
  • HTC Hero 100 – EasyRepair and Advanced modes.
  • HTC Touch Pro 2 (Rhodium) – EasyRepair and Advanced modes.

To resurrect these devices perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to Auto (RTCK), select 1 MHz or more for I710/I718 (depends on connection quality).
• Select the EasyRepair mode.
• Press the EasyRepair button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

Download Medusa Box v1.1.1

[shaiksha85]

Medusa Box v. 1.1.2 – added new models and features for a wide range of HTC models!

Medusa Box v. 1.1.2 Release Notes:

Added the following models and features:

• HTC Blackstone - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Magic 32A/32B (Sapphire) - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Jade - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Dream - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Raphael - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Intruder - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Desire - added CID Repair and Unlock (by code reading)
• HTC Touch Pro2 - added CID Repair and Unlock (by code reading)
• HTC Wildfire - added CID Repair and Unlock (by code reading)
• HTC Diamond - added CID Repair and Unlock (by code reading)
• HTC HD2 - added CID Repair and Unlock (by code reading)
• HTC Hero - added CID Repair and Unlock (by code reading)

To resurrect these models perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to Auto (RTCK), select 1 MHz or more for I710/I718 (depends on connection quality).
• Select EasyRepair mode.
• Press EasyRepair button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

Download link:

• Medusa Box 1.1.2

[shaiksha85]

Medusa Box v. 1.1.3 Release Notes:

• Added support for Qualcomm MSM7600 Mobile processor
• Added support for following phone models:
• HTC Imagio - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Topaz - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC myTouch 3G (Espresso) - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• Samsung SCH-W300 - added Dead Boot Repair
• Samsung SCH-W570 - added Dead Boot Repair
• Samsung SCH-W770 - added Dead Boot Repair

To resurrect devices perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in the manual;
• Make sure that correct model has been selected from the models list;
• Set Jtag speed to Auto (RTCK);
• Select the EasyRepair mode;
• Press the EasyRepair button and follow Wizard instructions;
• After operation is successfully finished make sure that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

Download Medusa Box Software 1.1.3

[shaiksha85]

Medusa Box v1.1.4 is out! We have added support for HTC TyTN II, HTC Touch Dual, Sony Ericsson XPERIA X1, Samsung SCH-W410, Samsung SCH-W750, Samsung SCH-W3000 and Samsung SCH-W9000!

• Medusa Box v1.1.4 Release Notes:
  
  • HTC TyTN II – added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading).
  • HTC Touch Dual – added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading).
  • Sony Ericsson XPERIA X1 – added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading).
  • Samsung SCH-W410 – added Dead Boot Repair.
  • Samsung SCH-W750 – added Dead Boot Repair.
  • Samsung SPH-W3000 – added Dead Boot Repair.
  • Samsung SPH-W9000 – added Dead Boot Repair.
  
  
  
• To resurrect these devices perform the following steps:
  
  • Solder JTAG cable to JTAG testpoints as explained in manual.
  • Make sure that correct model has been selected from model list.
  • Set Jtag speed to Auto (RTCK).
  • Select the EasyRepair mode.
  • Press the EasyRepair button and follow Wizard instructions.
  • After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
  • Desolder JTAG wires.

Download Medusa Box v1.1.4

[shaiksha85]

Medusa Box v1.1.5 is out! We have added support for Sony Ericsson Xperia X10i, E10i, E15i, Samsung SPH-W4100 and Samsung SCH-W550!


Medusa Box v1.1.5 Release Notes:

Added support for the following phone models:

Sony Ericsson Xperia X10i – added Dead Boot Repair.
Sony Ericsson Xperia X10 mini (E10i) – added Dead Boot Repair.
Sony Ericsson Xperia X8 (E15i) – added Dead Boot Repair.
Samsung SPH-W4100 – added Dead Boot Repair.
Samsung SCH-W550 – added Dead Boot Repair.
HTC Desire – improved new flash ICs support (Flashes with 2K page).

To resurrect these devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select the EasyRepair mode.
Press the EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box v1.1.5