solution for c261 auto restart

**ajmal** · 21-11-2007, 09:33 PM

with or without sim card set was restating again and again.
no smart-clip,no infinity and no any other device needed.
open Usb Smart Compal Tools 1.2 Cracked
u can download it from here.
http://www.gsmindia.in/forum/showthr...highlight=c261
open software connect serial port cable for T191.
select com port.
press connect button and press power on button.
press FFS.
press FFS erase.
wait for few minutes.
dissconnect cable.
reinsert battery.
and just enjoy.

**motofreek** · 21-01-2008, 09:17 PM

Hey Ajmal, what's up. I was just wondering where in the world i could get one of those serial cables ? If not do you have a schematic for one? maybe I can make it ! Thx

**richard_wifi** · 23-01-2008, 01:23 PM

thanks bro.....Ajmal
this solution are working fine

**ajmal** · 23-01-2008, 06:43 PM

welcome sir richard wifi for appreciating my post.
yesterday I also revive an other set with same method

**Baba_Mobile** · 11-03-2008, 07:55 PM

yes u r great ajmal. its work perfect and i have solved my problem with this.

**gsmkiller173** · 12-03-2008, 09:51 AM

yes u r great ajmal. its work perfect and i have solved my problem with this

**vega111** · 12-03-2008, 12:45 PM

nice work thanx for share

**GEEBOO** · 12-03-2008, 02:39 PM

good work keep it up

**rbisystems** · 13-03-2008, 05:09 PM

its better to use infinity
the solution he is providede is good
but infinity can even update firmware if mobile is dead....................

**ajmal** · 13-03-2008, 07:20 PM

Originally Posted by rbisystems

its better to use infinity
the solution he is providede is good
but infinity can even update firmware if mobile is dead....................

u r absolutely right.
but everybody in the world cant afford to purchase all boxes at the same time.
To purchase an Infinity box u have to spent about 250 usd.
while with this software u can do all with one dollar only (cable)
Anyhow thank you very much for adding some info at the forum.

**ovitell** · 14-03-2008, 02:49 PM

thanks brother this is importent for me.

**jaiprakashch** · 15-03-2008, 04:29 PM

thanks bro for crack and also thanks for operating instruction

**collins** · 11-02-2009, 06:43 PM

COM7 [VCP0] selected
"smart write" active
Action: flash
Write: Firmware
Skip: Language Pack
Write: Flex
Skip: Eeprom
Device: C261
Checking data, wait...
Connect...
Press and HOLD Power button...
rom version: 0411
Connecting...
initial boot phase complete
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
115200
Set Baud Done
Check Flash-1...
SW version: 6.6.61
HW version: MOTOROLA_E58S
LP ver: LP1_0132
Flex ver: FLEX_90_64_4102
cpu id: 08B6
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: C:\Documents and Settings\BIG\My Documents\backup_eeprom_calibration__20090211-075309.34E.bin
Check Flash-2 Done
Write...
Writing: Firmware
Writing: Flex
Write Done
Finished, time used: 1240 sec
Remove/Install battery now !

hello pls i do flash my C261 dead but now after flash when i do power on de phone motorola logo comes, after it comes on screen Flex Error.

n don,t no what to, de team pls kindilly help me

thanksssssssssss....

**ajmal** · 12-02-2009, 11:22 AM

Originally Posted by collins

COM7 [VCP0] selected
"smart write" active
Action: flash
Write: Firmware
Skip: Language Pack
Write: Flex
Skip: Eeprom
Device: C261
Checking data, wait...
Connect...
Press and HOLD Power button...
rom version: 0411
Connecting...
initial boot phase complete
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
115200
Set Baud Done
Check Flash-1...
SW version: 6.6.61
HW version: MOTOROLA_E58S
LP ver: LP1_0132
Flex ver: FLEX_90_64_4102
cpu id: 08B6
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: C:\Documents and Settings\BIG\My Documents\backup_eeprom_calibration__20090211-075309.34E.bin
Check Flash-2 Done
Write...
Writing: Firmware
Writing: Flex
Write Done
Finished, time used: 1240 sec
Remove/Install battery now !

hello pls i do flash my C261 dead but now after flash when i do power on de phone motorola logo comes, after it comes on screen Flex Error.

n don,t no what to, de team pls kindilly help me

thanksssssssssss....

have u tried the trick I describe in the start of this thread

**abdelkader** · 03-05-2009, 05:24 PM

Sorry no solution, phone restart.
I think that Smart clip can solve this problem.

Originally Posted by ajmal

with or without sim card set was restating again and again.
no smart-clip,no infinity and no any other device needed.
open Usb Smart Compal Tools 1.2 Cracked
u can download it from here.
http://www.gsmindia.in/forum/showthr...highlight=c261
open software connect serial port cable for T191.
select com port.
press connect button and press power on button.
press FFS.
press FFS erase.
wait for few minutes.
dissconnect cable.
reinsert battery.
and just enjoy.