I got new problem in my hti box

[saijagannath]

Dear sir I got new problem in my hti box I checked and reinstalled mxkey 3.5_2 but I can't flash any set in Fbus
I have updated hti box also please check log

MXKEY [FT SCR2000 0], SN: C******F
Using device: HTI, FW ver: 00.50, SN: 000****4
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20814(05-05-2012), Library ver: 1.0.0.14060(05-05-2012)
ASIC ID: 0x3168 [UPP_8M ver: 6.4]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Error flash config request!
with out using hub also same,I confusing it may be due to using mxkey and atf, phoenix in one system can you please help in this I feel mxkey is very good tool to do nokia job very easy so I need your help to enjoy with job

[TarikuL]

Dear sir I got new problem in my hti box I checked and reinstalled mxkey 3.5_2 but I can't flash any set in Fbus
I have updated hti box also please check log

MXKEY [FT SCR2000 0], SN: C******F
Using device: HTI, FW ver: 00.50, SN: 000****4
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20814(05-05-2012), Library ver: 1.0.0.14060(05-05-2012)
ASIC ID: 0x3168 [UPP_8M ver: 6.4]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Error flash config request!
with out using hub also same,I confusing it may be due to using mxkey and atf, phoenix in one system can you please help in this I feel mxkey is very good tool to do nokia job very easy so I need your help to enjoy with job

USE 3.5rev2.1
Are ucheck BB5 Set?
Mxkey have bug on DCT4.

[saijagannath]

yes sir I have this problem over 2 months ago waiting for new updates I got it today I have checked with 3.5_2.1
5130and 7210c also fail in Fbus flashing not only dct4 If it is only dct4 no problem I need bb5 flashing in Fbus

[saijagannath]

Please you just see this logs sing device: HTI Flasher Interface (WinUSB)
Connection status: UHCI:HUB:USB 2.00 Full-speed
Interface: MXBOX/HTI (Powered by MXKEY)
OTP ID: 3B0E18180D114E530EFF**B030000F5
Boot ver: 00.07, Box SN: 0000000
FW version: 00.50
HTI Flasher Interface (WinUSB) ready.

sing device: HTI Flasher Interface (WinUSB)
Connection status: UHCI:HUB:USB 2.00 Full-speed
Interface: MXBOX/HTI (Powered by MXKEY)
OTP ID: 3B0E18180D114E530EF**4B030000F5
Boot ver: 00.07, Box SN: 00000000
FW version: 00.50
HTI Flasher Interface (WinUSB) ready.

NK module version: 2.1
NK applet version: 00.20
NK module ready.

HTI connected as additional security service.
STANDALONE MODE enabled.
Please "Scan" or "BUS check" before any operation ...

MXKEY [FT SCR2000 0], SN: C081**F
Using device: HTI, FW ver: 00.50, SN: 00000000
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20814(05-05-2012), Library ver: 1.0.0.14060(05-05-2012)
CMT Data :
SYSTEM ASIC ID: 000000030000022600010007600C192102031104 [RAPUYAMA ver: 1.1]
EM0 ID: 00001040
EM1 ID: 00001060
PUBLIC ID: 16D00008911759406929A7827B9B63BB01390C97
ASIC MODE ID: 00
ROOT KEY HASH: DA550B5BAAB517409088A3E4F3EB53AC
ROM ID: E693EF0DAC22615B
SecondaryBoot: RAPUv11_2nd.fg [BB5] version: 12.2.0 revision: 3.0 size: 0x3B40
Supported Ids: 4003192102001104, 400C192102001104, 6003192102001104, 600C192102001104, 6003192102011104, 600C192102011104, 6003192102021104, 600C192102021104, 6003192102031104, 600C192102031104
eBB5ProtocolType: NEW
ERROR: Packet Error(0xAA), code 0xC1000003
this log is for c5-05 Fbus not working
help me sir I am hands up in this issues

[saijagannath]

mxkey.pngand check this this may be help full for my problem

[TarikuL]

mxkey.pngand check this this may be help full for my problem

Phone type: RM-208 (Nokia E65)
SW version: V 1.0615.25 10-01-07 RM-208 (c) Nokia.
Imei plain: 35326201532204-2
Product code: 0545811
Battery voltage: 4426 mV, current: 2 mA
Language Pack:
- not available.

SLPA ver[1]: PA_SL (15 digit NCK)

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed


Imei net: 353262015322042
Version: SIMLOCK SERVER VERSION 63
Provider: Hutchison 3G UK Ltd. , Country: United Kingdom
Counter: 0/3, 0/10

CONFIG_DATA: 2342000000000000
PROFILE_BITS: 0100000000000000

BLOCK1: 1=OPEN
BLOCK2: 1=OPEN
BLOCK3: 1=OPEN
BLOCK4: 1=OPEN

No problem on boot BB5.
What cable you use?
F-bus/UFC?
For UFC,you need to power 7.5 on cable.
I think cable voltage problem.
Better you check your cable.
& for get good performance on BB5 flashing flash USB Mode.
Quick & easy way.

[saijagannath]

Okay the same cable is working in other boxs but not in this however usb flashing is veryvery good in mxkey may I know one thing ? sir can I do mxkey jobs in old platform for Fbus flashing to make contact service in bb5 old sets may this help full

[TarikuL]

Okay the same cable is working in other boxs but not in this however usb flashing is veryvery good in mxkey may I know one thing ? sir can I do mxkey jobs in old platform for Fbus flashing to make contact service in bb5 old sets may this help full

Then you can check this box on other people's PC.
Now With Mx box you can do everything which you done past.

[saijagannath]

hello friend today I unable to connect my Hti box in 3.5_2.1 and 3.5_1.8 also the box is updated also same I hope that I lost it
see this

[TarikuL]

hello friend today I unable to connect my Hti box in 3.5_2.1 and 3.5_1.8 also the box is updated also same I hope that I lost it
see this

Can you post here screen picture here?

[saijagannath]

box problem1.jpg see this sir after updated and I tried in other system also with old version 35._1.8
do something for me sir

[saijagannath]

Please check this also hti box not found in list2.jpgI feel very bad of my lack of knowledge
yestedayI unable flash dct4 and bb5 fbus flashing today no more box connecting

[shaiksha85]

Please check this also hti box not found in list2.jpgI feel very bad of my lack of knowledge
yestedayI unable flash dct4 and bb5 fbus flashing today no more box connecting

Update Your HTI Box & Try ...................

[TarikuL]

Please check this also hti box not found in list2.jpgI feel very bad of my lack of knowledge
yestedayI unable flash dct4 and bb5 fbus flashing today no more box connecting

Connect you HTI MXBOX then post here picture.
You post mxkey dongle's picture.
I want to see your MX BOX condition.

[saijagannath]

box problem1.jpghti box not found in list2.jpg sir my jpg are not properly updated fail
An other thing I can not install box hti in proper direction it shows yellow mark in driver section