::.:: Free REPAIRING EROM GUIDES for most sonyericsson phones ::.::
EPAIRING EROM GUIDES for most sonyericsson phones dcu-60 cable required !!
Important information
your erom only really needs repairing if it's dead or damaged, a sign of a dead erom is normally a blinking red led in the infra red port.
Do NOT Flash different EROM Phone Model to your phone,
You need to use same CID in EROM as your phone EROM CID. example:You can NOT flash K800 CID51 EROM
to a K800 CID49 Phone.You can flash K800 CID49 EROM to a K800 CID49 Phone
Verify which is your EROM's version, it will be in xs++ logs or setool logs, or connect to xs++ and it will tell you look for this EROM CID: .
xs++3.1 guide needed files
xs++3.1, 4shared.com - online file sharing and storage - download XS++.rar
usb flash drivers for dcu-60 cable, 4shared.com - online file sharing and storage - download gg-setup.exe
cruiser drivers, 4shared.com - free file sharing and storage - share folder
eroms, SE-NSE Forums (Powered by Invision Power Board)
SETOOL 2 LITE 1.10 guide needed files
setool 2 lite 1.10, 4shared.com - free file sharing and storage - share folder
drivers , when you extract setool there will be a folder called drivers all drivers are in there
xs++3.1 erom repair guide, works with dcu-60, works with db2010 cid 36, cid 49, db2012 cid 50 cid 51 cid52, db2020 cid 49 cid 51 cid 52
step A selecting the correct erom, the erom must be in a .bin format.
a.Turn off the phone, remove the battery, sim and memory card,
b.run xs++.exe and press connect, if your using a cruiser cable you must select the correct com port from the drop down select port box.
c.now reinsurt your battery and connect the phone holding down C.
d.you are now connected to xs++.
http://i222.photobucket.com/albums/d.../screen001.jpg
i have highlighted what needs to match when choosing your new erom.
Platform: <<<some erom files don't contain this information, but longs u match up the rest of the information it will be fine.
EROM CID: <<< very important must match your erom file 100% Don't confuse with the OTP CID.
EROM Color: <<< most eroms and phones are red
Phone ID: <<< very important must match your erom file 100%
STEP B flashing the erom
1.Turn off the phone, remove the battery, sim and memory card,
2.run xs++.exe and press connect, if your using a cruiser cable you must select the correct com port from the drop down select port box.
3.now reinsurt your battery and connect the phone holding down C.
4.you are now connected to xs++.
5.Select your EROM's file in .bin format with the box Flash Main Firmware like this
http://i222.photobucket.com/albums/d.../screen002.jpg
6.press FLASH.
SETOOL 2 LITE 1.10 erom repair guide dcu-60 , supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
a.Turn off the phone, remove the battery, sim and memory card,
1.unzip and run setool2 lite 1.08
2.select phone type from phone type drop-down list,
3.press identify
4.reinsurt battery and holding down 2+5 connect the phone
5.press the unlock/repair button
http://i222.photobucket.com/albums/d.../screen003.jpg
