please help
Nokia 3120 ..imei number is ??????????????
Printable View
please help
Nokia 3120 ..imei number is ??????????????
bro....try read ur imei using jaf or mtbox...then patch that imei back
to its original imei...if u read the imei and it shows ?????????.that means ur UEM spoil..replace and write new rpl file...done...
yes richard_wifi is right , your UEM is damage. replace , and write rpl file , its have to purchase .
Nokia Imei/esn Repair
--------------------------------------------------------------------------------
I THINK THERE IS NO USEFULL INFO ABOUT THIS.
AND TO LET ALL WORLD KNOW HOW TO CHECK AND REPAIR THERE PHONES..
I WRITE ALL DETAILS ABOUT IT HERE ..
INFOMATION IS FOR ONLY PHONES DCT4 WD2 TIKU AND DCT4+ PHONES.
1 = YOU NEED JAF OR MT BOX OR F1 BOX OR GRIFFIN OLD BOX.
2 = YOU MUST CHECK PHONE IMEI/ESN DAMAGE RESONE..LIKE ITS FLASH AREA IMEI DAMAGE? OR ITS UEM AREA IMEI DAMAGE?
3 = FLASH AREA IMEI
a = THERE IS 2 TYPE OF IMEI DATA IN ANY DCT4 WD2 TIKU AND DCT4+ PHONES.SO IF WE FOUND WHICH WE HAVE TO REPAIR ITS MAKE YOUR WORK SO EASY TO REPAIR ANY IMEI/ESN DAMAGE PHONE..
b = FLASH AREA IMEI (DATA1 IN RPL)U HAVE TO CHECK UEM IMEI TO BE SURE THAT U HAVE LOSTED ONLY FLASH AREA IMEI.SOME TIME IN ERASE FLASH WE LOST FLASH AREA IMEI.SOME TIME IN FLASH IC DAMAGE OR WE CHANGED WE LOST FLASH AREA IMEI..
c = WE DON'T NEED TO CHANGE UEM TO REPAIR ONLY FLASH AREA IMEI.BECUSE THAT IMEI IN FLASH AREA CAN BE REWRITED..
d = FLASH AREA OR UEM AREA IMEI/ESN DAMAGE PHONE OFF IN 32SEC.
AND SHOW IMEI ?????????????????? AND ESN 000000000.
4 = UEM AREA IMEI ITS REPAIR WAY IS ONLY TO CHANGE UEM AND WRITE RPL WITH DATA1 AND DATA2 ..YES BOTH NEED.
5 = HOW DO WE KNOW THAT UEM IMEI IS CORRECT AND UEM IS OK??
a = THERE IS 2 WAY ONLY BOTH NOT PARFECT BUT TESTED ON 100 OR MORE PHONES BY ME ....
b = FIRST CHECK UEM IMEI WITH MT BOX OR JAF BOX WITH JAF USE OPTION READ UEM.. WITH MT BOX U HAVE TO PRESS READ ASK ITS SHOW U UEM IMEI.
c = COMAPER UEM IMEI WITH PHONE BACK WRITED .IF U CHANGED PHONE BACK USE THIS SITE TO CHECK YOUR IMEI NUMBER IS FOR YOUR MODEL OR NOT..LINK
d = ANY TOOL CAN READ ONLY 14DIGITE WE HAVE TO ADD LAST DIGITE TO CHECK AT THAT SITE.IF U DON'T KNOW LAST DIGITE JUST TRY ALL 0 TO 9 DIGITE TO CHECK..
6 = CONVERT ASK2RPL ..
7 = HOW TO WRITE RPL.EASY & SIMPLE JUST SELECT IN UFS WRITE UEM. IN JAF WRITE RPL.IN MT BOX WRITE RPL.
Plz post ur results