Nokia 5300: Dead

Nokia 5300: Dead

Physical Condition: Normal

Action Taken:

1) Flash but cmt error occure (jaf log below attached)

2) reflow CMT flash & rap3g

but still same problem?

any solution?

abhishekh:)


JAF version 1.98.58
Detected PKEY: xxxxxxxx
Card life counter: 79.48%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B0, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101001101
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 16F0010FD1026B56163C572E93964D05D111B498
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 191EC665DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
Error loading cmt boot...

reflow RETU then flash again
post result

Quote:

---

Originally Posted by SHIJILFONOTLY

reflow RETU then flash again
post result

---

Reflow Retu but still same problem :confused:

any other solution ?

Reflow flash chip.


Post result.

check voltages v core and vio
just post what you see in test points @ L4 manual
differance in vcore or vio ?

Quote:

---

Originally Posted by amol_sm

Reflow flash chip.


Post result.

---

I allready reflow CMT flash (flash chip).

any other solution?

nokia 5300 rm-146 flash problem

here is my log

MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C08721DE
Using device: HTI, FW ver: 00.50, SN: 01008E69
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20251(25-02-2012), Library ver: 1.0.0.13946(25-02-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAP3G ver: PA 1.x]
EM0 ID: 00000232
EM1 ID: 00000353
PUBLIC ID: 1A0001129FAD6B56812AF5FDC23EDD4EAB0DB603
ASIC MODE ID: 00
ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
ROM ID: 191EC665DFAAF68F
SecondaryBoot: RAP3Gv3_2nd.fg [BB5] version: 9.11.1 revision: 0.0 size: 0x3C00
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
eBB5ProtocolType: OLD
Storage0: 00EC 2208 - 0000 6921 [Samsung K8F5615ETM,256 Mbits] type: FLASH,NOR, asic:CMT
Storage content: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
TransmissionMode: 16Bit
Algorithm: RAP3Gv3_algo.fg [BB5 ALGORITHM] version: 9.50.0 revision: 0.0 size: 0x23010
Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
CMT PAPUBKEYS is blank/erased.
TransmissionMode: DDR&TX2
Processing MCU file: rm146__07.20.mcusw
[BB5,BB5 ALGORITHM] size: 14.56 MB
Supported Ids: 0103192101001101, 010C192101001101
Storing certificate [NPC, VARIANT, R&D] ...OK
Erase size: 16.37 MB
CMT FLASH,NOR area [00000000-000006BF]
CMT FLASH,NOR area [000006C0-0001FFFF]
CMT FLASH,NOR area [00020000-0007FFFF]
CMT FLASH,NOR area [00080000-000DFFFF]
CMT FLASH,NOR area [00100000-001FFFFF]
CMT FLASH,NOR area [00200000-0031FFFF]
CMT FLASH,NOR area [00320000-0105FFFF]
CMT FLASH,NOR area [01060000-01067FFF]
CMT FLASH,NOR area [01068000-0107FFFF]
erased in 8.203 s
Prog.status for Asic CMT ...
NOR: OK
Flash programming ...
Error chk C7012D0103CD
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x00020000, Result: 0000
Task failed at (0800001C)!!!
Last RX buffer: C7 01 2D 01 03 CD 00

Quote:

---

Originally Posted by parvez5030

nokia 5300 rm-146 flash problem

here is my log
Flash programming ...
Error chk C7012D0103CD
RX2 not responding, please check BSI/cable/pinout !
Error while programming [00] at 0x00020000, Result: 0000
Task failed at (0800001C)!!!
Last RX buffer: C7 01 2D 01 03 CD 00

---

check cable......

or try usb.....

post your result.....

sir i check bus cable also i try usb but result is same here is my log usb

MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C08721DE
Using device: USB ROM and HTI, FW ver: 00.50, SN: 01008E69
Connection status: UHCI:HUB::USB 2.00 (Full-speed)
Driver: NMWCD, ver: 7.1.32.73
Module ver: 1.0.0.20251(25-02-2012), Library ver: 1.0.0.13946(25-02-2012)
Processing MCU file: rm146__07.20.mcusw
[BB5,BB5 ALGORITHM] size: 14.56 MB
Supported Ids: 0103192101001101, 010C192101001101
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000010000022600010006010C192101001101 [RAP3G ver: PA 1.x]
CMT EM0 ID: 00000232
CMT EM1 ID: 00000353
CMT PUBLIC ID: 1A0001129FAD6B56812AF5FDC23EDD4EAB0DB603
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT ROM ID: 191EC665DFAAF68F
Flashing CMT Update Server Data, ULO: 0x3880 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, UPDAPP: 0x3CA00 bytes
Update Server code succesfully sent to phone.
Flashing CMT Update Server Data, PASUBTOC: 0x4A9C0 bytes
Update Server code succesfully sent to phone.
Waiting for USB device removal ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 472EEA3
Verifying communication to device...
ERROR: Could not verify communication !
Failed to set phone to flashmode, possible reason: Update Agent not running or PASUBTOC corrupted !
Please recover phone using FBUS.

sir want the answer please

Quote:

---

Originally Posted by parvez5030

sir want the answer please

---

Check BSI Line & Pinouts :
http://www.gsmindia.in/forum/bb5/901...tml#post276508

Don't Make Multiple Posts for Same Problem...

sir.please tell me what is it Failed to set phone to flashmode, possible reason: Update Agent not running or PASUBTOC corrupted !

nokia 5300 rm-146

Quote:

---

Originally Posted by parvez5030

sir.please tell me what is it Failed to set phone to flashmode, possible reason: Update Agent not running or PASUBTOC corrupted !

nokia 5300 rm-146

---

Try with HWK or Other Tool and Post Result...