i have come across many 3100 and 6100 with contact service problem i have try to flash them with latest file problem same could some body give 100% solutionn for this problem and is there a way to know if it is hardware or software contact service?
i have come across many 3100 and 6100 with contact service problem i have try to flash them with latest file problem same could some body give 100% solutionn for this problem and is there a way to know if it is hardware or software contact service?
100% from this problem cant give you nobody ..
Tray do next
Srart your UFS and put manuall your model
Take OFF point AUTODETECT PRODUCT
Make full ERASE
Write latest version MCU+PPM+CNT
Write good working PM (can reading it from good working phone)
Make full UI Setting
Write result here ..
PS: This is solution working from all phones DCT4
PPS: When it not soved your problems you need reball UPP and Flash IC ...
Good luck !
- Read UEM for backup RPL
- Rehot / reball UEM.
thanks for the reply but one thing how do i choose CNT because when i open i find many cnts
can anyone explain ,what is rpl file used for ??
o.k will try, and thanks for your help
Hi Dear Mostley Hardwhere Problem ........................
..::mr Fone::..
r_grameen@yahoo.com
RONY@GSM
i want 1110i display digram
i have a best answear before u cheak on off contact service or no and change upp i mean cpu ,,,,,,,,,,,,,,,,,, 100% ok
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks