give me 1255 nokia local mode soluioon
giveme 1255 nokia local mode solution
Dear friends 2700c display blank(white display) i have changed display and displa connecter, but problem same pls.. solve this problem..urgent
nokia ...5310 Plz Help Me 5310 local mode ....
Hello ..::Mr. Fone::..
I have an old but reliable 6230i but last week give me the test mode/local mode error message and after changing many batteries and about 8 hours without battery came back to life like nothing happen.
I view your solution, I have a ERSA minor 6v 5W soldering iron, enough skills to remake the soldering of N120 but I`m afraid that if I get out the battery it will enter in test mode again, what about that?
If you encourage me to change N120 component I have to know what it is to find a replacement.
Best Regards, CCO Alexandru
Alex, just follow this simple direction and your local mode is gone for ever:
Take a good look at the three battery terminals then connect BSI and GND terminals with a short piece of insolated wire. Test and see that LOCAL MODE AND TEST MODE problem is solved immediately. No need of removing any resistor. Enjo
Hello pastor good,
Are you telling me to connect only the middle and "-" of the battery to the corresponding terminals of the phone? For how long should I do that? Best Regards, CCO Alexandru
CCOALEX,
Unless you have another problem other than local mode or test mode, this solution works for all nokia phones having local mode or test mode problem soon as you insert battery. Try it again on another phone if it does not work on the one you are having now. If you got me right +terminal is not to be touched at all, then bridge the middle terminal to the -terminal to your right hand and the problem is solved automatically. You may wish to call me on +234-80-33338886 for more explanation.
Last edited by pastor good; 24-05-2011 at 01:50 AM.
For now my phone credit allow me only to send you a "Thanks pastor good (OHIO)" SMS witch I will send to you after I tested (with success ) this method but this will be tomorrow because I`m GMT+2h and is already another day for me. Best Regards, CCO Alexandru (YO3YQ)
Alex,
Please do test and see wonders, because i shall give you another discovery that is related to this process as soon as you confirm that it works. Understanding this gives you an edge over your colleages in the business even most hardware engineers do not know most of these simple things.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks