1100 contact service need help

[sunny_luthras]

1st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x011FFFFF,00208823,St M58MR016
Algorithm: u_st_i.fia, Ver: 4.57.0
Algorithm Ok, MSID: 84CA97B0694A3005BFC2285CFC
Decoded MSID: 3E4EBAE9-0052F0B0-A8000000
Encoded FAID: 7ED10FF0-F4F21535-1E0A7074
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x011EFFFF Erased, Time: 00:19
Area3: 0x011F0000-0x011FBFFF Erased, Time: 00:01
Area4: 0x013F0000-0x013FBFFF Out of Chip Bounds
Area5: 0x017F0000-0x017FBFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:08
Area1: 0x01170000-0x0117FFFF Erased, Time: 00:00
Area2: 0x01180000-0x011EFFFF Erased, Time: 00:04
PPM Flashing Completed, Time: 00:02
Flashing Completed.
Write PM Done, Time: 00:10
1st Boot Ok, DCT4, UPP: 2201
Rebooting Mobile
UI Defaults Ok, Time: 00:02
Set UI Factory Defaults Ok, Time: 00:00
Set Full Factory Defaults Ok, Time: 00:00
Set Software Upgrade Defaults Ok, Time: 00:00
Set Security Ok, Time: 00:00
IMEI: 355693-00-431022-6, ASIC: 2
SimLocks Initialized, Time: 00:03
Init Normal Mode Ok, Time: 00:10


but mobile is still in contact service need help

[..::ARUN::..]

dont worry
erase flash
then write flash
write the pm file below then apply UI settings tested

[sunny_luthras]

dont worry
erase flash
then write flash
write the pm file below then apply UI settings tested

im talking about nokia 1100 not 1110pm

[navid787]

just press the cpu with thick paper on the top surface of cpu

[rajeshhinduja2021]

just press the cpu with thick paper on the top surface of cpu

@@@@10x for this teep@@@@

[rajeshhinduja2021]

just press the cpu with thick paper on the top surface of cpu

@@@@10x for this teep@@@@
it's working

[safariyas]

1st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x011FFFFF,00208823,St M58MR016
Algorithm: u_st_i.fia, Ver: 4.57.0
Algorithm Ok, MSID: 84CA97B0694A3005BFC2285CFC
Decoded MSID: 3E4EBAE9-0052F0B0-A8000000
Encoded FAID: 7ED10FF0-F4F21535-1E0A7074
Area1: 0x01000000-0x0100FFFF Erased, Time: 00:00
Area2: 0x01010000-0x011EFFFF Erased, Time: 00:19
Area3: 0x011F0000-0x011FBFFF Erased, Time: 00:01
Area4: 0x013F0000-0x013FBFFF Out of Chip Bounds
Area5: 0x017F0000-0x017FBFFF Out of Chip Bounds
MCU Flashing Completed, Time: 00:08
Area1: 0x01170000-0x0117FFFF Erased, Time: 00:00
Area2: 0x01180000-0x011EFFFF Erased, Time: 00:04
PPM Flashing Completed, Time: 00:02
Flashing Completed.
Write PM Done, Time: 00:10
1st Boot Ok, DCT4, UPP: 2201
Rebooting Mobile
UI Defaults Ok, Time: 00:02
Set UI Factory Defaults Ok, Time: 00:00
Set Full Factory Defaults Ok, Time: 00:00
Set Software Upgrade Defaults Ok, Time: 00:00
Set Security Ok, Time: 00:00
IMEI: 355693-00-431022-6, ASIC: 2
SimLocks Initialized, Time: 00:03
Init Normal Mode Ok, Time: 00:10


but mobile is still in contact service need help

first u erase file .then write good flash file,then write goood pm,then unlock it will be okkkkkkkk

[jumper_master]

do this jumper 100% solution of hardware contact service

[musmyl]

Still not work broooooooooooooooo

[richard_wifi]

bro,try full erase then full flash

[mobiteck]

ya erase and flash with a good pm

[musmyl]

thaaaaaaaaaaks all maaaaaan

[papu3090]

full erase then & full flash
& unlock

[saqib_islam]

try these solutions 100% Solved Here
1100 Contact Service Problem

If you like the post please HIT THANKS BUTTON

[johnsupno]

i try.
i hope succes