1110 running fine with every sim. but whenever AIRCEL sim is inserted it shows insert sim card.
what the solution of this problem
Printable View
1110 running fine with every sim. but whenever AIRCEL sim is inserted it shows insert sim card.
what the solution of this problem
Brother Check That SimcardQuote:
Originally Posted by 3gmobile
may be it will not work
change sim ic ur problem will be solved
i also have faced that problem before
put (aircel) sim card IN OTHER mobile then check & post reply
I think problem in UEM ! You check VSIM !
@krishnaQuote:
Originally Posted by krishna
Read his Post
Mobile Working fine With other operators
He post Only Aircel Simcard
May Be That Aircel Simcard Damaged
i have checked that sim card it running fine in other mobile. i have tried other AIRCEL sim card also but same problem INSERT SIM CARD. AND ALSO CHECKED OTHER NETWORK SIL ITS WORKING FINE
can u check manually networkQuote:
Originally Posted by 3gmobile
Aircel its Comes. Its Show
may be Aircel operator Blacklisted your mobile
i have some harware solutions
i have serched manually with other sim on the samephone, among 5 network aircel is comming on the 4th position.
now whats your advise CHENNAIRAM
@chennairam
i have read the problem clearly most of the aircel cards are 16k so they dont work other simcards are 32k so they work
@3gmobile
brother just change sim ic or make jumper that will clear ur problem
@ Krishna SirQuote:
Originally Posted by krishna
16k Or 32K Simcard is Not a problem
He told When He Put the Aircel simcard in That Particular mobile only. it shows insert simcard
But The Same Card Works In Other mobiles
And Other Aircel simcard Works in that same Mobile
@ 3gmobile
i am right
Mobile is Okey With Network
sir there is a bit confusion. let me clear.
1- there is a set 1110 in which every sim is working except AIRCEL, with AIRCEL it is showing insert sim card.
2-in that particular set when serched manually it is showing aircel network.
3. i have checked that aircel sim and more aircel sim with other 1110 set they are working fine.
4. now the problem is that single 1110 is facing INSERT SIM CARD problem when any AIRCEL SIM IS INSERTED.
I THINK NOW EVERY THING IS CLEAR.
dear in these days two type of sim using by networkssome sim are working on 1.8 volt and some are working on 3 volt.Quote:
Originally Posted by 3gmobile
when you power on the phone first uem ic give 1.8 volt to vsim if sim didnot reply then uem give 3 volt to sim if still faild then its show insert sim, in your case i think your emif filter [sim ic] is ok but your uem is giving only one volt it could be 1.8 or 3 volt.
first of all you put the sim in working mobile phone and put a jumper wire on vsim and other end take out and took other jamper wire from ground now close the set and on the set when set acept the sim check the volt on both end of jumper it should be 1.8 or 3 volt. then same try on your faulty fone if the faulty fone did not give same volt then heat the uem on your own risk or put a required volt regulator [ldo]on vsim.
zaki537
dear br good info , carry on you good job