Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 31

Thread: Satisfactory processes using Octopus / Octoplus Samsung

  1. #16
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Samsung A847R Successfully Unlock Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
    -----------------------------------------------------------------------------------
    To connect SGH-A847R phone you have to perform the following
    steps:
    1. Disconnect USB cable from phone.
    2. Type *#782872#.
    3. Press confirm button.
    4. Type *#7465625# and leave appeared message on phone screen.
    5. Connect USB cable and select Diagnostics COM port.
    6. Press "Read Info" in software.
    -----------------------------------------------------------------------------------
    Platform: Samsung Anycall
    Selected port: COM58
    Selected model: SGH-A847R
    Detected phone model: SGH-A847R
    Mode: Normal
    SW Version: UXJK4
    HW Version: REV0.1
    Phone IMEI: 355832-04-006740-4
    -----------------------------------------------------------------------------------
    Platform: Samsung Anycall
    Selected port: COM20
    Selected model: SGH-A847R
    Mode: Normal
    Phone model: SGH-A847
    Firmware compiled date: Aug 12 2010
    Firmware compiled time: 07:00:00
    Firmware released date: Nov 17 2010
    Firmware released time: 02:13:50
    Phone IMEI: 355832-04-006740-4
    Bluetooth MAC: E2:FB:48:37:5A:3C
    SW Version: SBAM6290A-KPVMZL-2.6.014023_1S
    -----------------------------------------------------------------------------------
    Platform: Samsung Anycall
    Selected port: COM20
    Selected model: SGH-A847
    Mode: Normal
    Phone model: SGH-A847
    Firmware compiled date: Aug 12 2010
    Firmware compiled time: 07:00:00
    Firmware released date: Nov 17 2010
    Firmware released time: 02:13:50
    Phone IMEI: 355832-04-006740-4
    Bluetooth MAC: E2:FB:48:37:5A:3C
    SW Version: SBAM6290A-KPVMZL-2.6.014023_1S
    Reading phone unlock codes. It can take some time, please wait...
    FREEZE unlock code: 05906139
    NCK unlock code: 71648203
    NSCK unlock code: 00000000
    SPCK unlock code: 00000000
    CPCK unlock code: 00000000
    Work time: 0:01:14
    Don't spam forum, just HIT button

  2. #17
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Successfully Repaired I757m Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
    -----------------------------------------------------------------------------------
    To connect SGH-I757M phone you have to perform the following steps:
    1. Disconnect USB cable from phone.
    2. Go to Menu->Settings->Applications->Development.
    3. Turn on "USB Debugging" option.
    4. When message is appear press "Yes".
    5. Go to dial window.
    6. Enter "*#7284#" number.
    7. Set "USB" radio button to "Modem" value.
    8. Close window.
    9. Go to dial window.
    10. Enter "*#9090#" number.
    11. Set "Diag config" to "USB" value.
    12. Restart phone.
    13. Press "Read Info" in software.
    Selected firmware file: I757MUGLH2_OYCLH2
    _BMC_Canada_Bell_Android_4.0.4.oct
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM18
    Selected model: SGH-I757M
    Phone was not found on the selected port!
    Searching for USB diagnostic port...
    Connecting to phone on COM74
    Phone connection failed
    No diagnostic ports found!
    Connecting to phone on COM18
    Phone connection failed
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM74
    Selected model: SGH-I757M
    Phone was not found on the selected port!
    Searching for USB diagnostic port...
    Connecting to phone on COM74
    Mode: Emergency
    Please switch your phone to the download mode and connect it to a
    PC.
    To put SGH-I757M phone into download mode you have to perform the
    following steps:
    1. Reconnect phone battery.
    2. Press and hold "Volume - " + "Home" + "Power" buttons.
    3. When phone turns on press "Volume+" button.
    Found phone on
    Firmware write started.
    Writing BOOT section...
    BOOT section has been written successfully.
    Writing RECOVERY section...
    RECOVERY section has been written successfully.
    Writing SYSTEM section...
    SYSTEM section has been written successfully.
    Writing MODEM section...
    MODEM section has been written successfully.
    Writing CACHE section...
    CACHE section has been written successfully.
    Writing MDM section...
    MDM section has been written successfully.
    Firmware writing successfully completed.
    Don't spam forum, just HIT button

  3. #18
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Successfully Repair IMEI and S/N Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
    -----------------------------------------------------------------------------------
    To connect GT-I9300 phone you have to perform the following steps:
    1. Disconnect USB cable from phone.
    2. Go to Menu->Settings->Developer options.
    3. Turn on "USB Debugging" option.
    4. When message is appear press "Yes".
    5. Connect usb cable to phone.
    6. Go to dial window.
    7. Enter *#9090# number.
    8. Set speed to 115200.
    9. Reboot phone.
    10. Press "Read Info" in software.
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM18
    Selected model: GT-I9300
    Searching for a phone. Please wait...
    Phone was not found on the selected port!
    Searching for USB diagnostic port...
    No diagnostic ports found!
    Connecting to phone on COM18
    Phone connection failed
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM17
    Selected model: GT-I9300
    Port is busy
    Searching for a phone. Please wait...
    Phone found.
    Proper android device not found. Make shure that "USB debug" option
    on the device is turned on.
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM17
    Selected model: GT-I9300
    Searching for a phone. Please wait...
    Phone found.
    Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
    Phone SN: 00000000000
    Android version: 4.0.4 (IMM76D)
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM17
    Selected model: GT-I9300
    Searching for a phone. Please wait...
    Phone found.
    Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
    Phone SN: 00000000000
    Android version: 4.0.4 (IMM76D)
    Old IMEI: Unknown
    New IMEI: 351869-05-000009-3
    Erasing old IMEI. It can take some time. Please wait...
    Creating NVM backup
    Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
    \BACKUP\NVDATA-GT-I9300-12-08-2013_22-56-33-.nvm file
    Old IMEI was erased successfully.
    Phone will restart now
    After phone being rebooted and powered on perform the following
    steps:
    1. Disconnect USB cable.
    2. Go to dial window.
    3. Enter *#9090# number.
    4. Set speed to 115200.
    5. Connect phone via UART cable to Box.
    Connecting to phone, please wait...
    Phone connected successfully
    Deactivating MSL...
    MSL deactivate successfully
    Writing new phone IMEI...
    New IMEI successfully written.
    Please, restart the phone to apply changes
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM18
    Selected model: GT-I9300
    Searching for a phone. Please wait...
    Phone was not found on the selected port!
    Searching for USB diagnostic port...
    No diagnostic ports found!
    Connecting to phone on COM18
    Phone connection failed
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM18
    Selected model: GT-I9300
    Searching for a phone. Please wait...
    Phone found.
    Proper android device not found. Make shure that "USB debug" option
    on the device is turned on.
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM18
    Selected model: GT-I9300
    Searching for a phone. Please wait...
    Phone found.
    Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
    Phone SN: 00000000000
    Android version: 4.0.4 (IMM76D)
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM18
    Selected model: GT-I9300
    Searching for a phone. Please wait...
    Phone found.
    Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
    Phone SN: 00000000000
    Android version: 4.0.4 (IMM76D)
    Repairing Serial Number. It can take some time. Please wait...
    Phone will restart now
    SN repaired successfully.
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM18
    Selected model: GT-I9300
    Searching for a phone. Please wait...
    Phone found.
    Firmware compiled date: Wed Jul 4 15:58:11 KST 2012
    Phone SN: R31C50JBCGK
    Android version: 4.0.4 (IMM76D)
    Don't spam forum, just HIT button

  4. #19
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
    Selected firmware file: C3303KDX.oct
    -----------------------------------------------------------------------------------
    Platform: Samsung Swift
    Selected model: GT-C3303K
    Selected port: USB
    Please, press "volume up" and "lock" connect phone to USB without
    battery.
    Connecting...
    Phone found.
    Chipset version : 0A
    SCROM version : 33
    Sending loaders...
    Preloader send successfully
    Conecting to pipes...
    Successfully conecte to pipes.
    Writing firmware...
    Writing Firmware
    Writing partition LCDACT ...
    Erasing block...
    Block erase successfully.
    Writing block...
    Partition LCDACT write successfully.
    Writing partition MAIN ...
    Erasing block...
    Block erase successfully.
    Writing block...
    Partition MAIN write successfully.
    Writing partition DSP ...
    Erasing block...
    Block erase successfully.
    Writing block...
    Partition DSP write successfully.
    Writing partition ROOT ...
    Erasing block...
    Block erase successfully.
    Writing block...
    Partition ROOT write successfully.
    Writing partition BOOT ...
    Erasing block...
    Block erase successfully.
    Writing block...
    Partition BOOT write successfully.
    Writing partition TFS ...
    Partition TFS write successfully.
    Writing partition CSC ...
    Partition CSC write successfully.
    Firmware Write successfully.
    Don't spam forum, just HIT button

  5. #20
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Welcome to Octoplus/Octopus Box Samsung software version 1.3.2
    -----------------------------------------------------------------------------------
    Platform: Samsung Swift
    Selected model: GT-E2220
    Selected port: COM18
    Baud rate: 115200
    Plase, connect phone to UART cable, insert battery and press shortly
    power button
    Connecting...
    Phone in TAT mode.
    Reading info, please wait...
    Phone IMEI A: 35821404382823
    SW Version: E2220WBLC
    Bluetooth MAC: 28987B702073
    Phone SN : RV1C44HMV2
    -----------------------------------------------------------------------------------
    Platform: Samsung Swift
    Selected model: GT-E2220
    Selected port: COM18
    Baud rate: 115200
    Plase, connect phone to UART cable, insert battery and press shortly
    power button
    Connecting...
    Phone in TAT mode.
    Reading info, please wait...
    Phone IMEI A: 35821404382823
    SW Version: E2220WBLC
    Bluetooth MAC: 28987B702073
    Phone SN : RV1C44HMV2
    Reading codes...
    FREZEE : 15604500
    NET LOCK : 53769050
    Subset LOCK : 000000000
    SP LOCK : 000000000
    CP LOCK : 000000000
    SIM LOCK : 4184867194
    Activa LOCK : 000000000
    Phone LOCK : 4195067296
    Reading codes successfully completed.
    Don't spam forum, just HIT button

  6. #21
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Log file "C:\Program Files\Octoplus\Octoplus_Samsung\LOG\10-09-2013_15-00-08.log" created (9/10/2013 3:00:12 PM).
    INFO : 9/10/2013 3:00:12 PM > Set up system language English (file: English.ini)
    INFO : 9/10/2013 3:00:12 PM > Welcome to Octoplus/Octopus Box Samsung software version 1.3.2
    INFO : 9/10/2013 3:03:01 PM > Selected firmware file: GT-I9020_for_Repair_IMEI.oct
    WARN : 9/10/2013 3:03:04 PM > Please switch your phone to the download mode and connect it to a PC.
    WARN : 9/10/2013 3:03:04 PM > To put GT-I9020 phone into download mode you have to perform the following steps:
    WARN : 9/10/2013 3:03:04 PM > 1. Reconnect phone battery.
    WARN : 9/10/2013 3:03:04 PM > 2. Press and hold "Volume + " + "Volume -" buttons.
    WARN : 9/10/2013 3:03:04 PM > 3. Insert usb cable.
    INFO : 9/10/2013 3:03:11 PM > Found phone on
    INFO : 9/10/2013 3:03:11 PM > Firmware write started.
    INFO : 9/10/2013 3:03:11 PM > Writing IPBL section...
    INFO : 9/10/2013 3:03:14 PM > IPBL section has been written successfully.
    INFO : 9/10/2013 3:03:14 PM > Writing BOOT section...
    INFO : 9/10/2013 3:03:16 PM > BOOT section has been written successfully.
    INFO : 9/10/2013 3:03:16 PM > Writing SYSTEM section...
    INFO : 9/10/2013 3:04:15 PM > SYSTEM section has been written successfully.
    INFO : 9/10/2013 3:04:15 PM > Writing RECOVERY section...
    INFO : 9/10/2013 3:04:18 PM > RECOVERY section has been written successfully.
    INFO : 9/10/2013 3:04:18 PM > Writing USERDATA section...
    INFO : 9/10/2013 3:04:25 PM > USERDATA section has been written successfully.
    INFO : 9/10/2013 3:04:25 PM > Writing RADIO section...
    INFO : 9/10/2013 3:04:30 PM > RADIO section has been written successfully.
    INFO : 9/10/2013 3:04:30 PM > Firmware writing successfully completed.
    INFO : 9/10/2013 3:05:20 PM > -----------------------------------------------------------------------------------
    INFO : 9/10/2013 3:05:20 PM > To connect GT-I9023 phone you have to perform the following steps:
    INFO : 9/10/2013 3:05:20 PM > 1. Disconnect USB cable from phone.
    INFO : 9/10/2013 3:05:20 PM > 2. Go to Menu->Settings->Applications->Development.
    INFO : 9/10/2013 3:05:20 PM > 3. Turn on "USB Debugging" option.
    INFO : 9/10/2013 3:05:20 PM > 4. When the message appears press "Yes".
    INFO : 9/10/2013 3:05:20 PM > 5. Connect USB cable to the phone.
    INFO : 9/10/2013 3:05:20 PM > 6. Press "Read Info" in software.
    INFO : 9/10/2013 3:05:26 PM > Selected firmware file: I9023 XEN I9023XXKD1.oct
    WARN : 9/10/2013 3:06:02 PM > Please switch your phone to the download mode and connect it to a PC.
    WARN : 9/10/2013 3:06:02 PM > To put GT-I9023 phone into download mode you have to perform the following steps:
    WARN : 9/10/2013 3:06:02 PM > 1. Reconnect phone battery.
    WARN : 9/10/2013 3:06:02 PM > 2. Press and hold "Volume + " + "Volume -" buttons.
    WARN : 9/10/2013 3:06:02 PM > 3. Insert usb cable.
    INFO : 9/10/2013 3:06:02 PM > Found phone on
    INFO : 9/10/2013 3:06:02 PM > Firmware write started.
    INFO : 9/10/2013 3:06:02 PM > Writing IPBL section...
    INFO : 9/10/2013 3:06:04 PM > IPBL section has been written successfully.
    INFO : 9/10/2013 3:06:04 PM > Writing BOOT section...
    INFO : 9/10/2013 3:06:07 PM > BOOT section has been written successfully.
    INFO : 9/10/2013 3:06:07 PM > Writing RECOVERY section...
    INFO : 9/10/2013 3:06:09 PM > RECOVERY section has been written successfully.
    INFO : 9/10/2013 3:06:09 PM > Writing SYSTEM section...
    INFO : 9/10/2013 3:07:13 PM > SYSTEM section has been written successfully.
    INFO : 9/10/2013 3:07:13 PM > Writing USERDATA section...
    INFO : 9/10/2013 3:07:19 PM > USERDATA section has been written successfully.
    INFO : 9/10/2013 3:07:19 PM > Firmware writing successfully completed.
    Log file "C:\Program Files\Octoplus\Octoplus_Samsung\LOG\10-09-2013_15-00-08.log" closed (9/10/2013 3:18:34 PM).
    Don't spam forum, just HIT button

  7. #22
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Welcome to Octoplus/Octopus Box Samsung software version 1.3.3
    -----------------------------------------------------------------------------------
    To connect SGH-T599 phone you have to perform the following steps:
    1. Disconnect USB cable from phone.
    2. Go to Menu->Settings->Applications->Development.
    3. Turn on "USB Debugging" option.
    4. When message is appear press "Yes".
    5. Go to dial window.
    6. Enter "*#7284#" number.
    7. Set "UART" radio button to "Modem" value.
    7. Set "USB" radio button to "PDA" value.
    8. Restart phone.
    9. Press "Read Info" in software.
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM15
    Selected model: SGH-T599
    Searching for a phone. Please wait...
    Phone found.
    Firmware compiled date: Thu Feb 14 18:28:12 KST 2013
    Phone SN: R21D54JWWDN
    Android version: 4.1.2 (JZO54K)
    Unlocking phone...
    Reading data from phone...
    Data read successfully.
    Please conect phone to BOX via UART cable.
    Searching for a phone. Please wait...
    Phone found.
    Unlocking phone. It can take some time. Please wait...
    Please insert card into phone, if phone is locked, then type 00000000
    Phone is successfully unlocked
    Don't spam forum, just HIT button

  8. #23
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Only with Octopus Box Samsung T599 Welcome to Octoplus/Octopus Box Samsung software version 1.3.3
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM18
    Selected model: SGH-T599
    Searching for a phone. Please wait...
    Phone found.
    Firmware compiled date: Fri Apr 12 02:23:38 KST 2013
    Phone SN: R21D65WWPJJ
    Android version: 4.1.2 (JZO54K)
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM18
    Selected model: SGH-T599
    Searching for a phone. Please wait...
    Phone found.
    Firmware compiled date: Fri Apr 12 02:23:38 KST 2013
    Phone SN: R21D65WWPJJ
    Android version: 4.1.2 (JZO54K)
    Unlocking phone...
    Reading data from phone...
    Data read successfully.
    Please conect phone to BOX via UART cable.
    Searching for a phone. Please wait...
    Phone found.
    Unlocking phone. It can take some time. Please wait...
    Please insert card into phone, if phone is locked, then type 00000000
    Phone is successfully unlocked
    Don't spam forum, just HIT button

  9. #24
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    C 3312 successfully unlocked

    Welcome to Octoplus/Octopus Box Samsung software version 1.3.4
    Selected firmware file: C3312XXLA5_OXELA3.oct
    -----------------------------------------------------------------------------------
    Platform: Samsung In****on
    Selected model: GT-C3312
    Selected port: COM67
    Baud rate: 115200
    Phone must be OFF, and battary must be fully charged
    Please, connect the UART cable, Reconnect the battery, press Power
    button
    Connecting...
    Port is busy
    -----------------------------------------------------------------------------------
    Platform: Samsung In****on
    Selected model: GT-C3312
    Selected port: USB
    Phone must be OFF, and battary must be fully charged
    Please, connect USB cable and reconnect battery.
    Connecting...
    Phone found.
    Sending loaders...
    Sending preloader...
    Preloader send successfully
    Sending mainloader...
    Mainloader send successfully
    Writing firmware...
    Erasing Full Flash...
    Full Flash erase successfully.
    Writing "C3312XXLA5_psi"...
    Writing "C3312XXLA5_psi" done!
    Writing "C3312XXLA5_slb"...
    Writing "C3312XXLA5_slb" done!
    Writing "C3312XXLA5_BSY part 0"...
    Writing "C3312XXLA5_BSY" done!
    Writing "C3312XXLA5_BSY part 1"...
    Writing "C3312XXLA5_BSY" done!
    Writing "C3312XXLA5_CDS"...
    Writing "C3312XXLA5_CDS" done!
    Writing "C3312OXELA3_CSC"...
    Writing "C3312OXELA3_CSC" done!
    Firmware Write successfully.
    -----------------------------------------------------------------------------------
    Platform: Samsung In****on
    Selected model: GT-C3312
    Selected port: COM67
    Phone must be ON.
    Searching for a phone. Please wait...
    Phone was not found on the selected port!
    -----------------------------------------------------------------------------------
    Platform: Samsung In****on
    Selected model: GT-C3312
    Selected port: COM68
    Phone must be ON.
    Searching for a phone. Please wait...
    Phone was not found on the selected port!
    -----------------------------------------------------------------------------------
    Platform: Samsung In****on
    Selected model: GT-C3312
    Selected port: COM67
    Phone must be ON.
    Searching for a phone. Please wait...
    Phone was not found on the selected port!
    -----------------------------------------------------------------------------------
    Platform: Samsung In****on
    Selected model: GT-C3312
    Selected port: COM21
    Phone must be ON.
    Searching for a phone. Please wait...
    Found phone on COM21
    Reading info...
    UniqueNumber : 27370001361710
    SW Version : C3312XXLA5
    Phone IMEI A:
    Phone IMEI B: -----------------------------------------------------------------------------------
    Platform: Samsung In****on
    Selected model: GT-C3312
    Selected port: COM21
    Phone must be ON.
    Searching for a phone. Please wait...
    Found phone on COM21
    Reading info...
    UniqueNumber : 27370001361710
    SW Version : C3312XXLA5
    Phone IMEI A:
    Phone IMEI B:
    Deactivating MSL...
    MSL deactivate successfully
    Unlocking phone...
    Phone is successfully unlocked
    Please insert card into phone, if phone is locked, then type #0111*
    00000000#
    Don't spam forum, just HIT button

  10. #25
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    I9192 Unlocked! Platform: Samsung Android
    Selected port: COM149
    Selected model: GT-I9192
    Port is busy
    Mode: Emergency
    Unlock for GT-I9192 phone in emergency mode can’t be done
    -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM149
    Selected model: GT-I9192
    Mode: Normal
    Phone model: GT-I9192
    Firmware compiled date: Jun 11 2013
    Firmware compiled time: 20:00:00
    Firmware released date: Aug 19 2013
    Firmware released time: 22:14:14
    Phone IMEI: 357963-05-452006-7
    SW Version: M8930B-AAAATAZM-4.5.211107
    Unlocking phone...
    Creating NVM backup
    Reading NVM done!
    Firmware compiled date: Mon Aug 19 21:05:51 KST 2013
    Phone SN: R21D8CVZNVA
    Android version: 4.2.2 (JDQ39)
    Cheking Root
    Deactivating MSL...
    MSL deactivate successfully
    Phone will restart now. Please don't disconnect cable!
    Firmware compiled date: Jun 11 2013
    Firmware compiled time: 20:00:00
    Firmware released date: Aug 19 2013
    Firmware released time: 22:14:14
    Incorrect IMEI
    SW Version: M8930B-AAAATAZM-4.5.211107
    Found phone on COM149
    Repairing NVM for GT-I9192 phone...
    Phone is successfully unlocked
    Please, restart the phone to apply changes
    Don't spam forum, just HIT button

  11. #26
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    E1205T read codes Platform: Samsung Swift
    Selected model: GT-E1205T
    Selected port: COM117
    Baud rate: 921600
    Please, connect phone to UART cable, insert battery and press power
    button for 3 seconds.
    Phone found.
    Sending preloader...
    Preloader send successfully
    Sending mainloader...
    Mainloader send successfully
    Searching patch area, please wait...
    Writing patch...
    Patch successfully write.
    Rebooting phone
    Connecting...
    Phone in TAT mode.
    Reading info, please wait...
    Phone IMEI A: 35587705159430
    SW Version: E1205TJVL
    Phone SN : R21D20NZW6
    Reading codes...
    Freeze lock: 37391320
    Net lock: 00000000
    Sim lock: 00000000
    Phone lock: 00000000
    Sp lock: 00000000
    Don't spam forum, just HIT button

  12. #27
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    E1050 read codes successfully Platform: Samsung Swift
    Selected model: GT-E1050
    Selected port: COM117
    Baud rate: 921600
    Please, connect phone to UART cable, insert battery and press power
    button for 3 seconds.
    Phone found.
    Sending preloader...
    Preloader send successfully
    Sending mainloader...
    Mainloader send successfully
    Searching patch area, please wait...
    Writing patch...
    Patch successfully write.
    Rebooting phone
    Connecting...
    Phone in TAT mode.
    Reading info, please wait...
    Phone IMEI A: 35665005868239
    SW Version: E1050XXKA
    Phone SN : R21D73S8W6
    Reading codes...
    Freeze lock: 65103570
    Net lock: 00000000
    Sim lock: 00000000
    Phone lock: 00000000
    Sp lock: 00000000
    Don't spam forum, just HIT button

  13. #28
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default



    Welcome to Octoplus/Octopus Box Samsung software version 1.3.3
    -----------------------------------------------------------------------------------
    Platform: Samsung Swift
    Selected model: GT-S3770
    Selected port: COM10
    Baud rate: 921600
    Plase, connect phone to UART cable, insert battery and press shortly
    power button
    Connecting...
    Phone in TAT mode.
    Reading info, please wait...
    Phone IMEI A: 35814704101797
    SW Version: S3770XXKK
    Reading codes...
    FREZEE : 22171500
    NET LOCK : 59359190
    Subset LOCK : 00000000
    SP LOCK : 00000000
    CP LOCK : 00000000
    SIM LOCK : 00000000
    Activa LOCK : 00000000
    Phone LOCK : 00000000
    Reading codes successfully completed.
    Don't spam forum, just HIT button

  14. #29
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    Note 3 n9005 imei repair done -----------------------------------------------------------------------------------
    Platform: Samsung Android
    Selected port: COM538
    Selected model: SM-N9005
    Mode: Normal
    Phone model: SM-N9005
    Firmware compiled date: Aug 23 2013
    Firmware compiled time: 04:00:00
    Firmware released date: Sep 8 2013
    Firmware released time: 14:46:39
    SW version: M8974A-AAAANAZM-1.0.180057
    Old IMEI: 004400-15-202000-0
    New IMEI: 357507-05-
    Creating NVM backup
    Reading NVM done!
    Connecting to ADB, please waite...
    Firmware compiled date: Wed Sep 11 15:30:59 KST 2013
    PDA version: N9005XXUBMI7
    CSC version: N9005OJVBMI2
    SW version: N9005XXUBMI6
    Phone IMEI: Unknown
    Phone SN: RV1D956TFKR
    Android version: 4.3 (JSS15J)
    Cheking Root
    Erasing old IMEI. It can take some time. Please wait...
    Reading security backup, please wait...
    Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
    \BACKUP\Security-SM-N9005-27-04-2014_12-59-13-.asec file
    Phone will restart now. Please don't disconnect cable!
    After phone being rebooted and powered on perform the following
    steps:
    1. Disconnect USB cable.
    2. Wait for 1-2 minutes.
    3. Connect phone via UART cable to the Box.
    Serching phone...
    Phone found.
    Writing new IMEI. Please wait...
    Please connect phone to USB cable and press OK button.
    Serching phone...
    Firmware compiled date: Aug 23 2013
    Firmware compiled time: 04:00:00
    Firmware released date: Sep 8 2013
    Firmware released time: 14:46:39
    SW version: M8974A-AAAANAZM-1.0.180057
    Found phone on COM538
    Repairing NVM for SM-N9005 phone...
    Repairing 3G/4G...
    3G/4G repair successfully
    IMEI successfully repaired.
    To finish the operation, please restart the phone via phone's menu
    (don't disconnect the battery!)
    Don't spam forum, just HIT button

  15. #30
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    34
    Posts
    9,778

    Default

    i9100 repair sn done

    Don't spam forum, just HIT button

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 02-11-2013, 11:50 AM
  2. Replies: 0
    Last Post: 20-07-2013, 10:45 AM
  3. Replies: 0
    Last Post: 28-06-2013, 06:53 PM
  4. Replies: 0
    Last Post: 22-06-2013, 12:06 PM
  5. Replies: 0
    Last Post: 08-06-2013, 11:11 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •