I8262 Samsung Pattern Lock removed Done Without Data Loss

Welcome to Octoplus/Octopus Box Samsung software version 1.7.7
-----------------------------------------------------------------------------------
To connect GT-I8262 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM4
Selected model: GT-I8262
Port is busy
Searching for a phone. Please wait...
Found modem port on COM17
Detected phone model: GT-I8262
HW Version: GT-I8262CWAINS
Phone IMEI: 3570xxxxxxxxxxx
Preparing phone..
Initializing M-OBEX protocol...
Resetting Screen Lock...
Reset Screen Lock successfully completed.
To unlock screen please input any password or pattern!
:cool: