sir plz share me two model file
max mx 469
lephone f900
Printable View
sir plz share me two model file
max mx 469
lephone f900
You Must have to Post Chip Details for Flash Files...
Post Log...
sir two model also flash wrong model flash file flashing...also.so show the info is changes or not.....
sir two model already flash a wrong file flashing. so the info showing is correct or flash file info show.....
Please post with screen shootQuote:
Originally Posted by ranjib_kbc
Gee Pee user lock problem......not success a unlock / formate/reset/ also fail. NEED A FLASH FILE.
#################################################
Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM14
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_EON_EN29PL032
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
Error: Get Flash die baseaddress
################################################## #######
GOODVE GV11 ON/off problem......not success a formate/reset/ also fail. NEED A FLASH FILE.
#############################################
Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM14
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_M36C0W5030T0
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
Error: Get Flash die baseaddress
lephone f900......dead set.........formate/reset done.....write wrong flash file also..... send me correct flash file.
#######################################
Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM14
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600701900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7A Flash: NOR_ST_M58WR064HU
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=4
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x007A0000
Product information addr=0x007F0000
MMI resource addr=0x00600000
------Auto Format Address-------
Start=0x007B0000
Size =0x00040000
Read FS info...done
Max mx469 set on hang problem.........formate done but not success need a flash file.............
################################################## ###########
Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0000000000000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
ProjectID Not Found.