...::RIFF JTAG Updates Post Only Here::...

[shaiksha85]

02.08.2011 RIFF JTAG - SonyEricsson Xperia X8, X10 Mini supported

Whats new today :

SonyEricsson Xperia X8/E15 Unbrick, Boot repair, and NAND Chip Backup/Restore
SonnyEricsson Xperia X10a Mini /E10 Unbrick, Boot repair, and NAND Chip Backup/Restore
USB Broadband Modem ZTE MF627 new CPU ID added to allowed list

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.


RIFF Box – JTAG Revolution

[shaiksha85]

03.08.2011 Samsung Galaxy Tab M180s Unbrick – Boot Repair supported
Samsung M180S is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in some cases it is possible that you will have to hold Power On key during initial connection.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.

• To resurrect Samsung M180S:
  
  • Solder JTAG cable to Samsung M180S JTAG pads;
  • Connect USB cable to phone and PC;
  • Attach battery connector;
  • Make sure Samsung M180S is selected in the list of models;
  • Make sure a fixed TCK frequency is selected;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect USB cable, de-solder JTAG wires;
  • Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
• To enter download mode:
  
  • Disconnect PC cable;
  • Insert battery;
  • Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.
  
  
  
• Bug fix update :
  
• Samsung S5830
  
  • Improved resurrection by adding few more zones to be reflashed.
  • Fixed issue with NAND chip not being detected (0xAAAA/0xAAAA ID)
  • CPU ID 0x303C10E1 added to allowed list
  
  
  
• Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
  
  
• RIFF Box – JTAG Revolution

[shaiksha85]

04.08.2011 JTAG Manager v1.35 released

Whats new :

Added an arbitrary feature “Settings by Code” to the DCC Read/Write page.
Main purpose is to improve support quality for users: via “Settings Code” string a supporter person sees all settings which were set by user on the DCC Read/Write page.
Though, end-user may benefit from this too: Use “Settings Code” string for JTAG Manager to automatically setup all DCC Read/Write settings
Fixed data loss during read and save operations in case there is not enough disk space available to store required amount of data.
(for example reading full on DCC Read/Write page, or saving read full, etc).
Now available disk space checks are performed prior disk write operations.


Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.


RIFF Box – JTAG Revolution

[shaiksha85]

23.08.2011 Samsung Galaxy GIO (S5660) Unbrick – Boot repair supported


Samsung S5660 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.


To resurrect Samsung S5660 do this:

• Solder JTAG cable to Samsung S5660 JTAG pads;
• Insert battery and connect USB cable to phone and PC;
• Make sure Samsung S5660 is selected in the list of models;
• Click Resurrect button;
• Wait few seconds until software signals a successful operation completion;
• Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold both ‘Volume Down’ and ‘OK’ keys and press Power-On to enter Download Mode;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution

[shaiksha85]

03.10.2011 RIFF JTAG - Samsung and CDMA updates !

Whats new :

Added support for Samsung B209

Added support for Samsung S7330 Unbrick



Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution

[shaiksha85]

04.10.2011 Samsung Focus (i917) Unbrick, Dead boot repair supported


Added support for Samsung Focus (i917) Unbrick


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[shaiksha85]

JTAG Manager Version 1.36, RIFF Box Firmware v1.27 Released,Tegra 2 Support ! ! !

- added fast presets for automatic selection of settings for most common operations on DCC Read/Write page
For this click Settings by Code button and select a desired preset from list and then click Apply Settings.
For example if user selects "Write Full Image into NAND memory" the valid settings on the DCC Read/Write page
for writting full images into devices with NAND memory will be automatically selected
- fixed serious bug which caused resurrector DLLs which do upload data into RAM to upload broken data
For example DLLs which start Downlad Mode directly use this feature.
- added feature to accept text name of memory chip from DCC Loader and display it (currently used to display eMMC memory product name)
- fixed bug for resumming interrupted DCC Read: ifvcurrently cached file size was greater than > 2GB
(that is if read was interrupted on point when there was already more than 2GB of data read) the new reading data was not appended to the readout file end, but instead the file was corrupted.
- fixed bug for saving big files (after reading on DCC Read/Write page): if size exceeded 0x7FFFFFFF bytes JTAG Manager show no free disk space error.
- added TEGRA2 chipset selection in the Target list
- fixed an issue with the resurrection progress bar: in some cases during resurrection operations the progress bar would always stay at 0%.

Firmware 1.27
---------------------------

- added TEGRA2 debugging support (dual-core Cortex-A9)
- added new breakpoint type: "address mismatch" which allows geniune single-stepping on Cortex-A8,A9 (CoreSight) targets
(thus GDB Server can now perform low-level single step commands)

[shaiksha85]

RIFF Box – JTAG Revolution

Released updates :

• RIFF JTAG – Samsung S7330 Unbrick, Boot repair supported « RIFF Box – JTAG Revolution
• RIFF JTAG – CDMA Samsung B209 Breeze Supported « RIFF Box – JTAG Revolution
• RIFF JTAG – Samsung Focus (i917) Unbrick, Dead boot repair supported « RIFF Box – JTAG Revolution
• RIFF JTAG – Samsung i997 infuse 4g Unbrick, Boot repair supported « RIFF Box – JTAG Revolution
• RIFF JTAG -CDMA Samsung F619 supported « RIFF Box – JTAG Revolution
• RIFF JTAG – JTAG Manager v1.36, RIFF Box firmware v1.27, GDB Server v1.05 released « RIFF Box – JTAG Revolution

Bug fixes :
Samsung_M110S.dll
-------------------------------------
- pinout picture was corrected
Samsung_I9100.dll
-------------------------------------
- DCC Loader now will report eMCC Card product name
HTC_DesireHD.dll, HTC_DesireS.dll
-------------------------------------
- DCC Loader now will report eMCC Card product name
- Resurrection interface was changed to a more flexible one
Samsung_I917.dll
-------------------------------------
- added resurrection data for phone revisions with 2KB-paged NAND chips
RIFF Box – JTAG Revolution

[shaiksha85]

07.10.2011 Samsung Galaxy II, OMAP4430 version supported (Samsung i9100G, Samsung i9108)


Added support for Samsung Galaxy II, OMAP4430 version supported


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[shaiksha85]

12.10.2011 HTC Desire Z (HTC Vision) Update

Whats new :

Added support for HTC Desire Z (HTC Vision)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.



RIFF Box – JTAG Revolution

[shaiksha85]

24.10.2011 RIFF JTAG - LG & HTC updates !


Whats new :

Added support for: LG SH860

Added support for: HTC Desire CDMA


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution

[shaiksha85]

26.10.2011 Samsung Galaxy S Plus (i9001) Unbrick, boot repair supported

Whats new : Samsung Galaxy S Plus (i9001)

Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[shaiksha85]

28.10.2011 - RIFF JTAG Updates

Whats new :

• Samsung i9003 (Samsung Galaxy SL) Unbrick, boot repair
• Samsung m820 (Samsung Galaxy Prevail) Unbrick, boot repair
• ZTE RD518 Boot repair

To download and install updates, please close all running applications and press "Check for Updates" button in RIFF JTAG Manager.

Carefully read resurrection manual for i9003 to avoid frustration !


RIFF Box – JTAG Revolution Galaxy RulerZZZZZZZ

[shaiksha85]

11.11.2011 SonyEricsson Unlock/IMEI/TA Repair supported

Whats new :

With this release, we now support Unlock, IMEI repair and TA repair for listed SE models.
You can now totally rebuild software in these models, after replacing NAND chip for example. At the moment, we have following models released :

• x8
• x10
• x10 mini
• x10 mini pro

Remember that these models can have different names (e10, e15, u20 etc)
Please check up this link for more information :


RIFF JTAG – Unlock/IMEI/TA repair – SonyEricsson x8, x10, x10 Mini, x10 mini pro (e15, e10,u20 etc) « RIFF Box – JTAG Revolution




New JTAG Manager has been released too, together with new RIFF Box firmware. Please check this link for more :



RIFF JTAG – JTAG Manager v1.37, RIFF Box firmware v1.28 released « RIFF Box – JTAG Revolution


RIFF Box – JTAG Revolution

[shaiksha85]

Whats new :

Added support for: LG P999 G2X (LG Star) Modem unbrick/repair supported


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution