...::RIFF JTAG Updates Post Only Here::...

[shaiksha85]

31.12.2011 A new Year gift ! Samsung GT-i9103 Galaxy Z / Galaxy R (TEGRA2) Boot repair / Unbrick

Resurrecting Samsung I9103 is easy.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inside; sometimes pressing Power On key during connection may be required. External power supply can be used too.
During some definite startup time (1…3 seconds) TEGRA2 chipsets are not detected via JTAG interface (this could be due to FUSE-d security): that is, on contrary to other devices, which being fused are detected via JTAG but non-haltable, TEGRA2 chipsets give ‘Nothing Detected’ response (though TCK-RTCK pair keeps functioning ok).
Please note: If during resurrection of dead unit the JTAG connection cannot be established (nothing is detected) then re-try with the NRST wire disconnected.
To resurrect Samsung I9103:

• Solder JTAG cable to Samsung I9103 JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure Samsung I9103 is selected in the list of models;
• Click Resurrect button;
• If nothing is detected then try with NRST wire disconnected;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

RIFF Box – JTAG Revolution
Galaxy RulerZZZZZZZZZZZZ

[shaiksha85]

Samsung Galaxy Fit (GT-S5670) Unbrick – Boot Repair supported

Added support for: 05.01.2012 Samsung Galaxy Fit (GT-S5670) Unbrick – Boot Repair supported


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[shaiksha85]

10.01.2012 Samsung SGH-T759 Exhibit 4G Unbrick – Boot Repair supported

Added support for Samsung SGH-T759 Exhibit 4G

Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[shaiksha85]

10.01.2012 Samsung GT-i8150 Galaxy W (Samsung Ancora) Unbrick – Boot repair supported

Resurrecting Samsung I8150 is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Please note, MSM8255T is dual core chipset – it has ARM11 and Qualcomm Scorpion cores. During power on sequence only ARM11 core is visible on the JTAG chain. If boots are not completely damaged and it comes up to initializing of the Scorpion core then Scorpion core appears on the JTAG chain too. This will shift ARM11 from TAP0 into TAP1 position on the chain, while current resurrector has the ARM11 core hardcoded at TAP0 position. Thus make sure to establish JTAG connection in the time range while Scorpion core is not visible yet.
To resurrect Samsung I8150:

• Solder JTAG cable to Samsung I8150 JTAG pads;
• Make sure Samsung I8150 is selected in the list of models;
• Insert battery and connect USB Data cable;
• If you use only battery, press Power On key;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;
• Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold ‘Volume Down’ key and press ‘Power ON’ button.

Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[shaiksha85]

HTC Inspire 4G A9192 (HTC Stallion) Unbrick, Boot, IMEI, CID, ModelID, Unlock supported
Resurrecting HTC Inspire is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Some (or all) revisions of HTC Inspire boards have JTAG interface disabled (that is enable MARM JTAG Fuse is ****n in the MSM chip). In this case the JTAG may be enabled only by firmware itself. This is done by the FSBL loader, so writing to FSBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into FSBL zone and will respond with success code as if flashing succeeded. In this way FSBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except FSBL area) and will re-write PDA’s SPL version 0.85.0024. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD9812000’.
There is option to reflash BOOT and RECOVERY zones.
Please note, if your phone has the FSBL loader damaged and MCU has JTAG FUSE ****n then there is no way to resurrect your phone via JTAG interface.
To resurrect HTC Inspire:

• Solder JTAG cable to HTC Inspire JTAG pads;
• Insert batter and connect USB Data cable;
• Make sure HTC Inspire is selected in the list of models;
• If you use only battery, press Power On key;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold ‘Volume Down’ key and press ‘Power ON’ button.

[shaiksha85]

HTC Droid Incredible 2 ADR6350 Boot repair, Unlock, CID, ModelID, IMEI Update



Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[shaiksha85]

09.02.2012 Samsung Galaxy Precedent SCH-M828 Unbrick supported



---------------------------------------------------- Bug Fix updates

HTC_WildfireS.dll
-------------------------------------
- new HTC partition data for 2Kb NAND chips is used since old was reported to cause proximity sensor problems


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution

[shaiksha85]

14.02.2012 HTC ThunderBolt 4G ADR6400 (HTC Mecha) Unbrick – Boot repair supported


Bug Fix

HTC_DesireS.dll
-------------------------------------
- ID 0x27B360E1 is added to allowed list


HTC_Supersonic.dll
-------------------------------------
- added resurrection data for 4Kb NAND chips, so now DLL has data for both 4KB and 2KB versions.



Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution

[shaiksha85]

Some important news for today :

New updates:

• Samsung GT-P6200 Galaxy Tab 7.0 Plus Unbrick/Boot repair
• ZTE Light Tab (ZTE V9) Unbrick/Boot repair
• Huawei Ideos S7 Unbrick/Boot repair
• Orange Boston (Commtiva Z71) Unbrick/Boot repair
• Samsung Galaxy TAB (P1000N) Unbrick/Boot repair
• CDMA Samsung F219 Unbrick/Boot repair

Bug fixes:

• QSC1100_X14_NOR,
• QSC60XX_L18_D08_NOR,
• QSC60XX_L20_D08_NOR,
• QSC60XX_L24_D08_NOR

Have a nice weekend !


RIFF Box – JTAG Revolution

[shaiksha85]

So, again good news for RIFF users - make money before Your competitors do it !

24.02.2012 Samsung YP-G70EW Galaxy S WiFi 5.0 Unbrick


We rule the Galaxy !




www.jtagbox.com

[shaiksha85]

25.02.2012 JTAG Manager 1.39 released


Whats new:
Fixed bug which caused poping-up of ‘Out of Free Disk space’ window error while real error was just a failed HASH.
eMMC chip size is now represented not only in bytes but additionally, for visual convenience, in Mega/Giga bytes
Addres/Length fields on DCC Read/Write and JTAG Read/Write pages are changed into custom GUI representation: now 12(or 8)-digit hex values are shown in more human ‘readable’ way.
For more convenient work with the DCC Read/Write page features there was added standard lengths list, so user can set ‘human readable’ length value instead of manual typing of correct hexadecimal length value. For this just click combo box near Data Length field and select a desired length.

Example:
.

Now its possible to select any value from 1MB to 16GB, plus, in case of writing file, You can simply use “File Size” to automatically read opened file size and use it’s length.
Added balloon hints to suggest what to do in case user has ‘DLL was not Accepted’ issue.
Selected resurrector DLL version is shown in logging windows now along with Model name, for example:
“Selected Resurrector: [NoName x1234 V1.00]“
Added “Search for DLL” button on the Resurrection page:
As RIFFBOX grows up on number of supported devices, searching visually through the big lists of supported models for a definite device name became a tiresome procedure.
Now user can search for required model simply typing part of model name in the search dialog (for this select “Search for DLL for this Model Name” and type some part of device name you’re looking for)

Example:
.

.
Besides this, there is feature to search for resurrectors compatible with specific IDCODE. For example, if you have a not supported device in hands with ID = 0xXXXXXXXX, you can search for DLLs which work with such ID and try to connect your device using one of such ‘compatible’ DLLs. (for this select “Search for DLL with same IDCODE” and type IDCODE you’re looking for)
Example:
.

PLEASE NOTE!!! New resurrectors data base format is used in 1.39 version, thus
upon first start the JTAG MANGER WILL RESTART 1-5 TIMES in order to re-load and re-fresh all existing resurrector DLLs.

[shaiksha85]

25.02.2012 DirectProgramming.dll Version 1.02

Whats new:

• Added MSM7627A eMMC controller #3 support World First !
• Added S5PC100/S5PC110 eMMC controllers #0..3 support World First !
• Added MDM9600 NAND Controller support - World First !
• Addres/Length fields are changed into custom GUI representation:
• now 12-digit hex values are shown in more human ‘readable’ way.

Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.
RIFF Box – JTAG Revolution

[shaiksha85]

27.02.2012 RIFF Jtag Updates:

• Samsung GT-P6800 Galaxy Tab 7.7 Unbrick - Boot repair supported, World First !
• Qualcomm FullImage Files Plugin v1.05
• Samsung i9000-like FullImage Files Plugin v1.03

Who rule the Galaxy ? ? ?


RIFF Box – JTAG Revolution

[shaiksha85]

28.02.2012 RIFF JTAG Updates:

Whats new:

• RIFF JTAG – Samsung SGH-i777 Galaxy S II Unbrick – Boot Repair supported, World First ! ! !
• RIFF JTAG – Samsung GT-S7500 Galaxy Ace Plus Unbrick – Boot Repair supported, World First ! ! !

Come to the dark side, we'll rule the Galaxy !


RIFF Box – JTAG Revolution

[shaiksha85]

29.02.2012 RIFF JTAG Updates:

RIFF JTAG Manager v1.40

Whats new:

• Solved the problem with download of updates. Now no more nasty ‘Out of Disk Space’ error!!!Some users could experience this kind of error during download of large files (30MB and more). These errors were often with Wi-Fi configurations where certain routers dind’t handled passive ports FTP data transfers properly.
• Added check if JTAG Manager is running with administrator rights (in case it is installed in Program Files location).
• This solves issues for older operating systems (Windows XP) which have no UAC and no manifest means controlling elevation of application rights. Thus – now if the JTAG Manager is started without administator rights it will restart itself with request to run it “as administrator”.
• Embedded font for text message window on JTAG Read/Write page.
• Improved displaying of DLL version information: If FileVersion info is available JTAG Manger will display it rather than the internal version supplied by DLL.
• This simplifies version tracking for us.
• Download speed limit is increased to 250kb/s

Please click “Check for Updates” button in order to download and apply new updates.
Samsung Wave 3 GT-S8600 Unbrick - Boot repair supported, World First ! ! !
RIFF Box – JTAG Revolution