RIFF JTAG-RIFF JTAG Manager v1.43 released
RIFF Box JTAG Manager software setup
This will install following files to Your computer:
- JTAG Manager software v1.43
- RIFF Box Firmware v1.32
- RIFF Box control port driver
- RIFF Box update port driver
- RIFF DCC USBLoader driver
- QUALCOMM QHUSB_DLOAD driver
After You execute setup, it will install all files to desired destination, and launch drivers installer script.
Take note, If You’re using Windows XP, You’ll have to provide drivers location to Hardware Installation Wizard after connecting devices for first time.
RIFF Box – JTAG Revolution
RIFF JTAG - Samsung updates !
11.05.2012 RIFF JTAG – Samsung SPH-D710 Galaxy S2 Epic Touch 4G (Samsung Within) Unbr
11.05.2012 RIFF JTAG – Samsung SPH-D710 Galaxy S2 Epic Touch 4G (Samsung Within) Unbrick – dead boot repair supported
Repairing bricked Samsung SPH-D710 Galaxy S2 Epic Touch 4G is easy with RIFF Box. Samsung SPH-D710 is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung SPH-D710:
- Solder JTAG cable to Samsung SPH-D710 JTAG pads;
- Connect USB cable to phone and PC;
- Insert battery;
- Make sure Samsung SPH-D710 is selected in the list of models;
- Make sure a fixed TCK frequency is selected;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.
http://www.jtagbox.com/wp-content/up...c_4g_touch.jpg
RIFF JTAG - Weekend Updates
18.05.2012 RIFF JTAG – Weekend updates:
Whats new:
- Samsung B7320 unbrick/boot repair support added
- HTC Sensation 4G (PG581000) Unbrick, Unlock, S-Off, SuperCID support added
- HTC Sensation (PG581300/PG583101) Unlock support added
- HTC Evo 3D Unlock support added
Bug Fix updates:
- HTC Desire HD Support for new board revisions with hboot 2.xx (No Network problem)
- HTC Wildfire S Proximity sensor fix
RIFF Torrent tracker:
Please click “Check for updates” button in RIFF JTAG Manager to download new files.
RIFF Box FAQ:
RIFF JTAG
www.jtagbox.com
23.05.2012 RIFF JTAG – HTC 7 Surround T8788 (HTC Mondrian) Unbrick, Unlock, SuperCID
23.05.2012 RIFF JTAG – HTC 7 Surround T8788 (HTC Mondrian) Unbrick, Unlock, SuperCID and IMEI repair supported
Repairing bricked HTC Surround (PD26100) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.74.1000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD26*****’.
To resurrect HTC Surround (PD26100):
- Solder JTAG cable to HTC Surround JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure HTC Surround (PD26100) is selected in the list of models;
- If you use battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press ‘Power ON’ button.
http://www.jtagbox.com/wp-content/up...7_surround.jpg
RIFF JTAG - HTC One V Unbrick/Unlock/IMEI Repair, Samsung E160K Support
31.05.2012 RIFF JTAG Updates
Whats new:
RIFF Torrent Tracker updates:
WWW.RIFFBOX.ORG
RIFF JTAG - HTC Radar, HTC Rhyme via USB Supported
12.06.2012 RIFF JTAG Updates
Whats new:
Bug fixes:
- HTC One V
- Fixed bug with DBL partition causing phone to remain in QHUSB permanently.
RIFF Torrent Tracker:
www.riffbox.org
15.06.2012 RIFF JTAG - CDMA Updates – 4 new ZTE models
15.06.2012 RIFF JTAG - CDMA Updates – 4 new ZTE models
Whats new:
* ZTE S170 support added
* ZTE S180 support added
* ZTE S165 support added
* ZTE FWPC26 support added
Bug fixes:
* HTC_Flyer_PG41100.dll
* HTC_Flyer_PG41400.dll
PLL frequency is lowered, now no more RAM memory test failed bug error at the connection stage.
RIFF Torrent tracker:
* RiffBox_Setup_15.06.2012_v1.torrent
www.riffbox.org
22.06.2012 RIFF JTAG – HTC Sensation XE PG5813001 (G18) Unbrick, Unlock, S-Off, IMEI
Repairing bricked HTC Sensation XE (PG5813001) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector will reflash radio’s boot zone and will re-write PDA’s HBOOT version 1.29.0000.
There is option to reflash BOOT and RECOVERY zones.
In addition, you can set S-OFF (unlock HBOOT so you will be able to flash any ROM) by clicking “Make S-OFF” checkbox in the resurrector settings.
To resurrect HTC Sensation (PG5813001):
- Solder JTAG cable to HTC Sensation (PG5813001) JTAG pads;
- Insert batter and connect USB Data cable;
- Make sure HTC Sensation (PG5813001) is selected in the list of models;
- If you use only battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
http://www.jtagbox.com/wp-content/up...ation_xe_2.jpg
RIFF JTAG -Samsung Galaxy S3 (SGH-i747) Support and more
20.07.2012 RIFF JTAG Updates
Whats new:
- Samsung SGH-i747 Galaxy S III LTE Unbrick / Boot repair supported, Check Here ! ! !
- RIFF JTAG Manager v1.44 released (Added SnapDragon S4 MCU support)
- RIFF Box Firmware v1.33 released ( Read more )
- QUALCOMM ESC6xxx Generic DLL released (Used in Motorola EX130, EX132)
- QUALCOMM MSM7225A Generic DLL released (Used in HTC Pico, HTC Desire C, Samsung B5510 and more)
RIFF Torrent Tracker:
Who rules the Galaxy ?
www.riffbox.org
RIFF JTAG – Fly IQ285 unbrick – boot repair supported
31.08.2012 RIFF JTAG – Fly IQ285 unbrick – boot repair supported
Repairing bricked Fly IQ285 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector reflashes radio’s boot zones. There are options to reflash BOOT and RECOVERY zones.
To resurrect Fly IQ285:
- Solder JTAG cable to Fly IQ285 JTAG pads;
- Insert batter and connect USB Data cable;
- Make sure Fly IQ285 is selected in the list of models;
- If you use only battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press ‘Power ON’ button.
http://www.jtagbox.com/wp-content/up...urbo-IQ285.jpg
10.09.2012 RIFF JTAG – Samsung SGH-A887 Unbrick – Dead boot repair
10.09.2012 RIFF JTAG – Samsung SGH-A887 Unbrick – Dead boot repair
The Samsung A887 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
To resurrect Samsung A887:
- Solder JTAG cable to Samsung A887 JTAG pads;
- connect USB cable;
- Make sure Samsung A887 is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Down’ and ‘Camera’ keys and press ‘Power ON’ button.
http://www.jtagbox.com/wp-content/up...7-Solstice.jpg
RIFF JTAG – Samsung SHV-E160L Galaxy Note LTE Unbrick – Boot repair
11.09.2012 RIFF JTAG – Samsung SHV-E160L Galaxy Note LTE Unbrick – Boot repair
Repairing bricked Samsung E160L is easy with the RIFF Box. The device is based on the 2nd-generation Qualcomm MSM8260 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung E160L:
- Solder JTAG cable to Samsung E160L JTAG pads;
- Connect USB cable to phone and PC;
- Insert battery;
- Make sure Samsung E160L is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press Power-On.
http://www.jtagbox.com/wp-content/up...160l-black.jpg
RIFF JTAG – Samsung SHV-E120L Galaxy S II HD Unbrick – Dead boot repair
11.09.2012 RIFF JTAG – Samsung SHV-E120L Galaxy S II HD Unbrick – Dead boot repair
Repairing bricked Samsung E120L is easy with the RIFF Box. The device is based on the 2nd-generation Qualcomm MSM8660 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung E120L:
- Solder JTAG cable to Samsung E120L JTAG pads;
- Connect USB cable to phone and PC;
- Insert battery;
- Make sure Samsung E120L is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press Power-On.
http://www.jtagbox.com/wp-content/up..._ii_lte_hd.jpg
11.10.2012 RIFF JTAG – Samsung SGH-L760 Unbrick – Boot Repair Supported
Repairing bricked Samsung L760 is easy with the RIFF Box. To resurrect Samsung L760:
- Solder JTAG cable to Samsung L760 JTAG pads;
- Connect USB cable or instert batteryu;
- Make sure Samsung L760 is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘9’ key and press ‘Power ON’ button.
.
http://www.jtagbox.com/wp-content/up...m_sgh-l760.jpg