Page 6 of 8 FirstFirst ... 45678 LastLast
Results 76 to 90 of 114

Thread: ...::RIFF JTAG Updates Post Only Here::...

  1. #76
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default RIFF JTAG-RIFF JTAG Manager v1.43 released

    RIFF Box JTAG Manager software setup

    This will install following files to Your computer:

    • JTAG Manager software v1.43
    • RIFF Box Firmware v1.32
    • RIFF Box control port driver
    • RIFF Box update port driver
    • RIFF DCC USBLoader driver
    • QUALCOMM QHUSB_DLOAD driver


    After You execute setup, it will install all files to desired destination, and launch drivers installer script.
    Take note, If You’re using Windows XP, You’ll have to provide drivers location to Hardware Installation Wizard after connecting devices for first time.



    RIFF Box – JTAG Revolution

  2. #77
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default RIFF JTAG - Samsung updates !

    04.05.2012 RIFF JTAG – Samsung SGH-T679 Exhibit II 4G (Samsung Ancora) Unbrick – Dead Boot repair supported


    Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


    RIFF Box – JTAG Revolution

  3. #78
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default 11.05.2012 RIFF JTAG – Samsung SPH-D710 Galaxy S2 Epic Touch 4G (Samsung Within) Unbr

    11.05.2012 RIFF JTAG – Samsung SPH-D710 Galaxy S2 Epic Touch 4G (Samsung Within) Unbrick – dead boot repair supported


    Repairing bricked Samsung SPH-D710 Galaxy S2 Epic Touch 4G is easy with RIFF Box. Samsung SPH-D710 is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
    Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

    To resurrect Samsung SPH-D710:
    • Solder JTAG cable to Samsung SPH-D710 JTAG pads;
    • Connect USB cable to phone and PC;
    • Insert battery;
    • Make sure Samsung SPH-D710 is selected in the list of models;
    • Make sure a fixed TCK frequency is selected;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable, de-solder JTAG wires;


    Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
    To enter download mode:
    • Disconnect PC cable;
    • Insert battery;
    • Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.




  4. #79
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default RIFF JTAG - Weekend Updates

    18.05.2012 RIFF JTAG – Weekend updates:

    Whats new:
    • Samsung B7320 unbrick/boot repair support added
    • HTC Sensation 4G (PG581000) Unbrick, Unlock, S-Off, SuperCID support added
    • HTC Sensation (PG581300/PG583101) Unlock support added
    • HTC Evo 3D Unlock support added


    Bug Fix updates:
    • HTC Desire HD Support for new board revisions with hboot 2.xx (No Network problem)
    • HTC Wildfire S Proximity sensor fix


    RIFF Torrent tracker:


    Please click “Check for updates” button in RIFF JTAG Manager to download new files.

    RIFF Box FAQ:

    RIFF JTAG
    www.jtagbox.com

  5. #80
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default 23.05.2012 RIFF JTAG – HTC 7 Surround T8788 (HTC Mondrian) Unbrick, Unlock, SuperCID

    23.05.2012 RIFF JTAG – HTC 7 Surround T8788 (HTC Mondrian) Unbrick, Unlock, SuperCID and IMEI repair supported


    Repairing bricked HTC Surround (PD26100) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
    In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
    Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.74.1000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD26*****’.
    To resurrect HTC Surround (PD26100):
    • Solder JTAG cable to HTC Surround JTAG pads;
    • Insert USB Data cable into board and PC;
    • Make sure HTC Surround (PD26100) is selected in the list of models;
    • If you use battery, press Power On key;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect power supply, de-solder JTAG wires;


    Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
    To enter download mode:
    • Disconnect PC cable;
    • Insert battery;
    • Hold ‘Volume Down’ key and press ‘Power ON’ button.




  6. #81
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default RIFF JTAG - HTC One V Unbrick/Unlock/IMEI Repair, Samsung E160K Support

    31.05.2012 RIFF JTAG Updates

    Whats new:



    RIFF Torrent Tracker updates:




    WWW.RIFFBOX.ORG

  7. #82
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default RIFF JTAG - HTC Radar, HTC Rhyme via USB Supported

    12.06.2012 RIFF JTAG Updates

    Whats new:


    Bug fixes:
    • HTC One V
    • Fixed bug with DBL partition causing phone to remain in QHUSB permanently.


    RIFF Torrent Tracker:


    www.riffbox.org

  8. #83
    GsmIndia Editor Sr. TarikuL's Avatar
    Join Date
    Jun 2010
    Location
    Bangladesh
    Posts
    2,047

    Arrow 15.06.2012 RIFF JTAG - CDMA Updates – 4 new ZTE models

    15.06.2012 RIFF JTAG - CDMA Updates – 4 new ZTE models

    Whats new:

    * ZTE S170 support added
    * ZTE S180 support added
    * ZTE S165 support added
    * ZTE FWPC26 support added

    Bug fixes:


    * HTC_Flyer_PG41100.dll
    * HTC_Flyer_PG41400.dll

    PLL frequency is lowered, now no more RAM memory test failed bug error at the connection stage.

    RIFF Torrent tracker:

    * RiffBox_Setup_15.06.2012_v1.torrent





    www.riffbox.org

  9. #84
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    31
    Posts
    9,777

    Cool 22.06.2012 RIFF JTAG – HTC Sensation XE PG5813001 (G18) Unbrick, Unlock, S-Off, IMEI

    Repairing bricked HTC Sensation XE (PG5813001) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
    Resurrector will reflash radio’s boot zone and will re-write PDA’s HBOOT version 1.29.0000.
    There is option to reflash BOOT and RECOVERY zones.
    In addition, you can set S-OFF (unlock HBOOT so you will be able to flash any ROM) by clicking “Make S-OFF” checkbox in the resurrector settings.
    To resurrect HTC Sensation (PG5813001):

    • Solder JTAG cable to HTC Sensation (PG5813001) JTAG pads;
    • Insert batter and connect USB Data cable;
    • Make sure HTC Sensation (PG5813001) is selected in the list of models;
    • If you use only battery, press Power On key;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
    .
    Don't spam forum, just HIT button

  10. #85
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default RIFF JTAG -Samsung Galaxy S3 (SGH-i747) Support and more

    20.07.2012 RIFF JTAG Updates

    Whats new:

    • Samsung SGH-i747 Galaxy S III LTE Unbrick / Boot repair supported, Check Here ! ! !
    • RIFF JTAG Manager v1.44 released (Added SnapDragon S4 MCU support)
    • RIFF Box Firmware v1.33 released ( Read more )
    • QUALCOMM ESC6xxx Generic DLL released (Used in Motorola EX130, EX132)
    • QUALCOMM MSM7225A Generic DLL released (Used in HTC Pico, HTC Desire C, Samsung B5510 and more)


    RIFF Torrent Tracker:




    Who rules the Galaxy ?


    www.riffbox.org

  11. #86
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default RIFF JTAG – Fly IQ285 unbrick – boot repair supported

    31.08.2012 RIFF JTAG – Fly IQ285 unbrick – boot repair supported


    Repairing bricked Fly IQ285 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
    Resurrector reflashes radio’s boot zones. There are options to reflash BOOT and RECOVERY zones.
    To resurrect Fly IQ285:
    • Solder JTAG cable to Fly IQ285 JTAG pads;
    • Insert batter and connect USB Data cable;
    • Make sure Fly IQ285 is selected in the list of models;
    • If you use only battery, press Power On key;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect power supply, de-solder JTAG wires;


    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
    To enter download mode:
    • Disconnect PC cable;
    • Insert battery;
    • Hold ‘Volume Down’ key and press ‘Power ON’ button.




  12. #87
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default 10.09.2012 RIFF JTAG – Samsung SGH-A887 Unbrick – Dead boot repair

    10.09.2012 RIFF JTAG – Samsung SGH-A887 Unbrick – Dead boot repair
    The Samsung A887 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
    To resurrect Samsung A887:
    • Solder JTAG cable to Samsung A887 JTAG pads;
    • connect USB cable;
    • Make sure Samsung A887 is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect power supply, de-solder JTAG wires;


    Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
    To enter download mode:
    • Disconnect PC cable;
    • Insert battery;
    • Hold both ‘Volume Down’ and ‘Camera’ keys and press ‘Power ON’ button.



  13. #88
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default RIFF JTAG – Samsung SHV-E160L Galaxy Note LTE Unbrick – Boot repair

    11.09.2012 RIFF JTAG – Samsung SHV-E160L Galaxy Note LTE Unbrick – Boot repair

    Repairing bricked Samsung E160L is easy with the RIFF Box. The device is based on the 2nd-generation Qualcomm MSM8260 chipset.
    Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
    To resurrect Samsung E160L:
    • Solder JTAG cable to Samsung E160L JTAG pads;
    • Connect USB cable to phone and PC;
    • Insert battery;
    • Make sure Samsung E160L is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable, de-solder JTAG wires;


    Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
    To enter download mode:
    • Disconnect PC cable;
    • Insert battery;
    • Hold ‘Volume Down’ key and press Power-On.




  14. #89
    GsmIndia.in Team Legend shaiksha85's Avatar
    Join Date
    Sep 2009
    Location
    ...:: Bellary (karnatak) INDIA ::...
    Age
    35
    Posts
    8,743

    Default RIFF JTAG – Samsung SHV-E120L Galaxy S II HD Unbrick – Dead boot repair

    11.09.2012 RIFF JTAG – Samsung SHV-E120L Galaxy S II HD Unbrick – Dead boot repair

    Repairing bricked Samsung E120L is easy with the RIFF Box. The device is based on the 2nd-generation Qualcomm MSM8660 chipset.
    Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

    To resurrect Samsung E120L:
    • Solder JTAG cable to Samsung E120L JTAG pads;
    • Connect USB cable to phone and PC;
    • Insert battery;
    • Make sure Samsung E120L is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable, de-solder JTAG wires;


    Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

    To enter download mode:
    • Disconnect PC cable;
    • Insert battery;
    • Hold ‘Volume Down’ key and press Power-On.




  15. #90
    Moderator Service Team's Avatar
    Join Date
    Jul 2011
    Location
    VANDAVASI,THIRUVANAMALAI, [TAMIL NADU]
    Age
    31
    Posts
    9,777

    Cool 11.10.2012 RIFF JTAG – Samsung SGH-L760 Unbrick – Boot Repair Supported

    Repairing bricked Samsung L760 is easy with the RIFF Box. To resurrect Samsung L760:

    • Solder JTAG cable to Samsung L760 JTAG pads;
    • Connect USB cable or instert batteryu;
    • Make sure Samsung L760 is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect power supply, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
    To enter download mode:

    • Disconnect PC cable;
    • Insert battery;
    • Hold ‘9’ key and press ‘Power ON’ button.

    .

Page 6 of 8 FirstFirst ... 45678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 12-05-2011, 07:03 PM
  2. Replies: 0
    Last Post: 23-04-2011, 10:43 AM
  3. RIFF JTAG Updates - HTC Ozone/Chief, JTAG Manager v1.29 and more
    By shaiksha85 in forum Gsm Updates & News
    Replies: 0
    Last Post: 31-03-2011, 09:04 PM
  4. Replies: 0
    Last Post: 24-09-2010, 07:24 PM
  5. RIFF JTAG Updates - Samsung i780 pda repair added
    By maverick_lp28 in forum RIFF JTAG Box
    Replies: 2
    Last Post: 17-07-2010, 04:55 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •