anybody help me
when I connect my ufs box then it wants to usb<->serial cable driver.
thanks
anybody help me
when I connect my ufs box then it wants to usb<->serial cable driver.
thanks
Please contact with your resseller its a box problem i think u have used ufs micro...
enjoy....
Solution:
1. I download it from ftdi site MPROG utility
2. Also uninstall all drivers using FTDI ... program named FTDICLEAN.EXE (sorry guys but i not remember from where get it ... use GOOGLE)
3. I try to connect UFS again but UFS not recognize original drivers
- install drivers from \Program Files\MPROG\Drivers and connect UFS
4. Start MPROG and "Scan" system
- MPROG found one device ... I read EEPROM on device and see VID and PID are standart for FTDI chip but NOT STANDART for UFS
(UFS comes with VID:0888 and PID:5508 .... SEE INI FILE INTO UFS DRIVERS DIRECTORY)
5. Into MPROG -> File/New
- Device Type -> FT232BM
- USB VID/PID -> Own VID & PID
- Vendor ID -> 0888
- Product ID -> 5508
- USB Version number -> USB 1.1
- Check "Use Fixed Serial Number"
- Enter into EDIT BOX your serial number located on UFS cover
- Manifacturer -> UFS2
- Product description -> UFS2 SarasSoft
- Uncheck "Only Program Blank Devices"
6. Into MPROG - File/Save ... to save template for future use and for unlock function "Device/Program"
7. Into Mprog - Device/Program ... to program eeprom
8. Close Mprog and disconnect UFS from cable
9. Connect UFS to cable and now UFS recognize OWN drivers
.... and VOILA ... ALL WORKS!!!
--------------------------------------------------------------------
you can download all neaded program from
http://www.evil-hackers.com/stanner_.../UFS%20REPAIR/
Last edited by kovsarsystem; 05-04-2008 at 03:19 PM.
Here is solution of usb<->serial
1)download driver for usb<->serial from
http://www.ftdichip.com/Drivers/CDM.../CDM 2.04.06 WHQL Certified.zip
OR
http://www.ftdichip.com/Drivers
2) download mprog from
http://gsmindia.in/forum/showthread....ighlight=mprog
3) give manually path of driver, open mprog, open file select ufsgood, scan drive and write now unplug ufs and plug again all will be ok
say thanks
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks