How to use updated logs? Plz help.
Printable View
How to use updated logs? Plz help.
sir, i used ufs3 tools the resalt UNEXPECTED EXCEPTION-BOX-AUTH ERROR-52 how to solve my problem.thank u .
sir, i used ufs3 tools the resalt UNEXPECTED EXCEPTION-BOX-AUTH ERROR-52 how to solve my problem.thank u .
i cant update firmware 2.8 my ufsx box i'll try mobile ex 3.0 but it show "no connection" & try also bb5 update clint it' error msg "bad enviorment" plz help
[B]Downloads USFx Firmware Update 3.0
By: ::..M-Mubashir..::
dear sir i dont have HWK but i upgrade my device now i recieve an erorre unexpected exeption BOR-OUTH error 52 or 252 or somthin else mo box is ufsx 19 an box id Sn no. is 128942 plzzzz help meeee
Does an1 know where i can get ufsx19 box without HWK firmware my box downgraded to ufs3 pliz help!! i wanna get back my ufs 19 plz help me
ufs 19 and 20 etc is all the same no different if you still want to get the 19 then just remove from pc and install the cd again.
gasan bro i have do that but my device is still ufs 3 even i have reinstall my pc windows but i have not get good result means ufs3 is still with me plz do domthing my bro help me
After update it is asking for USB dual serial Driver kindly help on priority
i have ufsx19 box without HWK my box downgraded to ufs3 pliz help!! i wanna get back my ufs 19 plz help me tel me what i can i do nobody answer me yet
what different?same duty
-- UFSx S/N : 120019
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: S-FLASHER
please send me activation string pleazzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
hi, any body can help,, nokia5310 mic jumper plizz
when i used hwkkiller my box ufs-4 doest work now i am not able to connect but when i try to update it shows the serial number can u give solution for it
i have 1 problem nokia 3110c after flash contact serviece
help please,,,how to use /flash using sdbx
canger your USB cable
try with other pc OR reinstal drivers
UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 10
UFS_USB V2.8 (c) SarasSoft 2007. S/n: 85474
HID:
HWK: NOT CONNECTED 45
how to solve the problem when i connect the device.
BR
shimul.
my ufs is show the error
hwk dis......
thank for you and good work
plzzzzzzzzzzzz hlp when i upgrede my hwk a msg shone thr hwk login error 54054
HWK Upgrade server found!
Preparing connection to server...
Connecting to HWKUpgrade server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Server reported error:No more upgrade logs. Please contact your reseller.
login error54054 plzzzzzzzzzz hlp
i am having 3 ufs boxes but there are some problem i cant connect with them:confused:
Thanks good work i successfully upgrade firmware and problem solved
hello sir when i upgrade i get this
Upgrade log:
---------- HWK Update Client v 2.0.9.0 ----------
---------- HWK upgrade started:28.03.2010 17:24:41 ----------
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 39828
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: UFS3
-- HWK ID : A1.04-PRO1-EFFEE3B94160005C
-- HWK Status : 1, DL: 0
----------
Locating HWK Upgrade server...
HWK Upgrade server found!
Preparing connection to server...
Connecting to HWKUpgrade server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Error: Server returned unrecognized reply
solution for it plz very urgent
Thank you my friend but none of them do the work!
You have 100% surely used a different flashing cable for a different nokia model
do u know what i mean ?
remember flashing cable have unique schema for Rx Tx send recieve
Now the only solution is to
1 open the box and check the atmega CPU
connect to the computer and check whether rx tx led blinking if it is so then the CPU is OK
2. check the V3 MOSFET on the board if it is burnt change the MOSFET
REMEMBER NEVER USE A DIFFERENT FLASING CABLE FOR DIFFERENT NOKIA MODEL EVEN IF IT SEEMS IDENTICAL OR SAME
my ufs box says After connect my box this error "BOX_AUTH_ERROR 20".this was happen after updated in mxkey from 2.6 to 2.8v mxkey killed eprom kill can any one plz help me
now my tornado ufs repaired ok with khawajagsm software now it is not 2.8v as origenal 2.6 however my usf box is ok