Plz Help Me Hwk Uptade Cliend v 2.1.0.0

-- Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- Done, use Update Firmware to authorise UFS.
-- UFSx Device: UFS3 SarasSoft A, USB S/N: xxxxxxx
-- Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- Done, use Update Firmware to authorise UFS !
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : xxxxxxxx
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: CLONE BOX
-- HWK NOT CONNECTED or DEAD
-- HWK ERROR : 0010

Plz Help Me
Gsmasadm@yahoo.com
Amjad_Amjad442@yahoo.com

Use HWK Update Client v 2.2.0.0

Attachment 30945


Attachment 30946

Quote:

---

Originally Posted by jaan_g

-- Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- Done, use Update Firmware to authorise UFS.
-- UFSx Device: UFS3 SarasSoft A, USB S/N: xxxxxxx
-- Reset Failed, Trying to Repair UFS ...
-- Boot: 62 CF
-- Done, use Update Firmware to authorise UFS !
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : xxxxxxxx
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: CLONE BOX
-- HWK NOT CONNECTED or DEAD
-- HWK ERROR : 0010

Plz Help Me
Gsmasadm@yahoo.com
Amjad_Amjad442@yahoo.com

---

Problem :
Box's Serial Number : Black Listed
HWK Chip : Not Connected or Damage
Update Client : Older Version

Solution :
Use Current Update Client : v2.2.0.0
Use UFS3Tools to Change Box's Serial

For HWK Not Connected or Dead Follow This :
1. Check with Other USB Cable
2. Check on Other PC

If Same :
1. Open Box
2. Remove HWK Chip
3. Clean Pinouts
4. Connect HWK Chip
5. Connect Box to PC and Check

If Still Same Check This Thread for Solution : HWK Not Connected or Dead

Best Solution : Buy New [Original] HWK Box