R300 unlock done by SE-tools

[rhee2007]

v0.914039/UNI
CARD SERIAL: 000000
Loaded 51 flash descriptors
PLEASE ATTACH TURNED OFF PHONE NOW
IF PROCESS NOT STARTING,UNPLUG/PLUG CABLE/BATTERY FEW TIMES...
supported phone was not detected
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed: 64 secs.
PLEASE ATTACH TURNED OFF PHONE NOW
IF PROCESS NOT STARTING,UNPLUG/PLUG CABLE/BATTERY FEW TIMES...
supported phone was not detected
phone pre-boot failed,possible RECOVERY needed.
PROCEDURE WAS STOPPED BY USER
Elapsed: 5 secs.
PLEASE ATTACH TURNED OFF PHONE NOW
IF PROCESS NOT STARTING,UNPLUG/PLUG CABLE/BATTERY FEW TIMES...
supported phone was not detected
Can't load ID loader !
PROCEDURE WAS STOPPED BY USER
Elapsed: 237 secs.
PLEASE ATTACH TURNED OFF PHONE NOW
IF PROCESS NOT STARTING,UNPLUG/PLUG CABLE/BATTERY FEW TIMES...
bootROM version: 0502
Locosto HS detected, booting...
FLASH ID: 0089/8904 (00040000)
SECURITY AREA BACKUP CREATED.

PHONE IMEI:3545250000000
USERLOCK RESET TO "0000"
TOTAL CALL TIME RESET
Firmware lock check determined.
SIMLOCK PATCH EXECUTED
Updating TA...
Elapsed: 66 secs.

[frankerebus]

hey dude thanks for sharing but in the most news versions i have that (r300 telcel mexican)

v0.915032/UNI
v0.915038/UNI
v0.914039/UNI
CARD SERIAL: 000000000

Loaded 51 flash descriptors
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS "POWER ON" BUTTON SHORTLY...
ROM version: 0502
Locosto HS detected, booting...
LOADER NOT RESPONDING
ENABLE "SIGNED MODE"
failed
FAILED TO SETUP PHONE
Elapsed: 36 secs.
SIGNED MODE (USING SERVER)
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS "POWER ON" BUTTON SHORTLY...

EROM "R5A036" CID: 0001
SOFTWARE CID: 0001
SIMLOCK STATE: "1"
LOADER VERSION: "R3A006"

PHONE IMEI:3545720213xxxx
USERLOCK RESET TO "0000"
TOTAL CALL TIME RESET
Elapsed: 29 secs.


only userlock , how to unlock ,debrand .


any ideas????

[furious15]

sir i have a problem of my sony ericsson R300 the (problem in insert correct sim card)...that is the display of my phone....plz help about this problem or idea how can solve this promblem...