Se tool testing version v1.1094 ( x10i,x10a,so-01b)

[khawajagsm]

anybody with locked or not locked x10i,x10a,so-01b, please come here.

Greetings.

lets make some tests.

1.
make sure your x10i,x10a have standard semc android 2.1 firmware.
if not, flash such firmware.

2.
go to
menu->settings->applications->development->enable usb debugging, check it.
install "adb drivers" ( drivers\adb_drivers\x10_drivers )

3.
power off phone.

go to pda tab, select x10 as model, on options check "signed mode,altbypass mode,do full unlock instead usercode reset", fill any valid username/password.

press unlock.

when prompted detach phone, turn it on fully, connect it again.
( or you can leave phone on cable, then power it on manually )

DO NOT DETACH PHONE FROM AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
DO NOT REMOVE BATTERY FROM PHONE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP

https://rapidshare.com/files/573768306/v1.1094.rar

please take in account, that it is testing version, it works for my x10, however, we should test it on other phones.
( during testing period, 0 credits required to unlock x10i using altbypass method. )

originally posted by

the_laser

br.DYNET

[sajee]

anybody with locked or not locked x10i,x10a,so-01b, please come here.

greetings.

Lets make some tests.

1.
Make sure your x10i,x10a have standard semc android 2.1 firmware.
If not, flash such firmware.

2.
Go to
menu->settings->applications->development->enable usb debugging, check it.
Install "adb drivers" ( drivers\adb_drivers\x10_drivers )

3.
Power off phone.

Go to pda tab, select x10 as model, on options check "signed mode,altbypass mode,do full unlock instead usercode reset", fill any valid username/password.

Press unlock.

When prompted detach phone, turn it on fully, connect it again.
( or you can leave phone on cable, then power it on manually )

do not detach phone from after procedure started, you can kill your phone, only riff jtag will help
do not remove battery from phone after procedure started, you can kill your phone, only riff jtag will help

https://rapidshare.com/files/573768306/v1.1094.rar

please take in account, that it is testing version, it works for my x10, however, we should test it on other phones.
( during testing period, 0 credits required to unlock x10i using altbypass method. )

originally posted by

the_laser

br.dynet

my friend was tried this method he say unlock don but after no signal its right or no sir???