i need k800 cid52 reast file
(r8bf003_cxc1250210_generic_wi)
i need k800 cid52 reast file
(r8bf003_cxc1250210_generic_wi)
Hello
use 4034 or upper version and load main file in ssw and use identify key and program create it for you.
yes mazmaz u r right.
Smile GSM Thanks for "Shokran"
AlcatelModel : Method GenericSwitch ON your phone without SIM Card,
Then compose : *#0000*CODE#,
To finish compose : *#0001*CODE#.
Model : 531 &535Switch ON your phone without SIM Card,
Press * and without release compose 787292,
A new menu "Unlock Network" will appear, then select "YES",
Enter the Code we send to you.
Model : All other AlcatelSwitch on your phone with a not allowed SIM Card,
When the message "Enter Network Key" appear enter the Code we send to you.
BENQModel : All BenqSwitch ON your phone with a not allowed SIM Card,
Enter the Unlock Code we send to you.
BlackBerryModel : BlackBerry 8700Go to the Menu -> Options -> Advanced Options -> Sim card press select,
while holding the Shift key (bottom right corner CAPS), type mepd.You should now see the five locking categories listed,
while holding the alt key, type mep2. Release the alt key.
You are now prompted to enter the Network MEP code. Enter the code, enter Return/Enter, the device should then be unlocked.
Model : BlackBerry 8800You must have a SIM card in your phone to complete these steps ( Can be active or inactive )
Go to settings menu => and then Options
Select Advanced options => and then Sim card
Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code received from UnlockBase.com and press in the track wheel / jog dial to confirm
Your phone is now unlocked
Model : BlackBerry 8100 PearlGo to Options Menu => Advanced Options
In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2
Enter the unlock code.
Model : BlackBerry 8100 (Vodafone Australia)PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS
This procedure unlocks the handset from being network restricted from only using SIM cards from Vodafone Australia. In case of difficulties, please refer to the FAQ listed below
Take note of the unlocking code shown above
Insert a Non-Vodafone Australia working SIM card.
Ensure the phone is charged and then switch the phone on.
Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)
The phone will then display a message. The most common is "Invalid SIM card". (Different message? See FAQ below)
Select "Turn Wireless Off"
Select "Settings" Menu , then go to Advanced Options > SIM Card
Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}
When prompted with "Enter Network MEP code (255 left)" on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter. (Unlocking code is shown above)
Reset the phone by pulling the battery
Switch the phone on and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card. (You will need reception and phone credit with the different network provider)
Please Note:
If the unlocking code is entered incorrectly the next attempt to unlock the device will be delayed for 10 seconds increments. The number of unlocking attempts is limited to 255 tries only. When 255 attempts is reached the phone will be permanently blocked.
To unblock the phone, it must be taken to a RIM service centre. No outgoing calls including emergency call is possible when the phone is blocked.
FAQ:
Question: My phone asks to enter a PIN number
Answer: For SIM cards with PIN ENBLED you will be required to enter a PIN. This is not the unlocking code that has just been provided. For information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card please read the manual that came with your phone. This is not a handset unlocking difficulty.
Question: My handset displays a different message then what is shown in this procedure when I insert a Non Vodafone Australia SIM card.
Answer: The most common message the phone will display is "Invalid SIM card". Because each handset may have a different variation in software there is no common message. If your handset displays a different message it is recommended to move onto the next step. Note: Faulty SIM Cards - The handset may also display messages indicating the SIM you are using to unlock the handset is faulty, it could display "Insert SIM" "Bad Card", "Card Error" or "Card Rejected", confirm the SIM card is inserted correctly ? Gold area downwards and the cut of the corner matches correctly. You will need a working Non Vodafone SIM card to unlock the handset, Vodafone can not assists with other networks faulty SIMs.
Question: I am outside of Australia and experiencing difficulties unlocking the phone that I purchased from a Vodafone Australia outlet
Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.
Model : All BlackBerryUsing the menu go to Settings Menu -> SIM card pressselect.
While holding the SHIFT key, type mepd
You should now see the five locking categories listed.
While holding the SHIFT KEY, type mep2.
Release the shift key.
You are now prompted to enter the Network MEP code (it will also state how many attempts left)
Enter the code
Enter Return/Enter
The device should then be unlocked
BoschModel : All BoschSwitch on your phone with a not allowed SIM Card,
When the message "Enter Network Key" appear enter the Code we send to you.
EricssonModel : All EricssonSwitch ON your phone without SIM Card,
Press 1 time the left arrow,
Press 2 times the button * ,
Press 1 time the left arrow,
The message "Personalize with MNC2" will appear,
You can now enter the Unlock Code we send to you.
HandspringModel : Treo 180 &270Switch ON your phone without SIM Card,
Compose : *#*#CODE#
Model : Treo 600Switch ON your phone with Allowed SIM Card,
Go to Menu and select "Phone Tool" or "Phone Application"
Type on Virtual Keyboard *#*#CODE#
Select with PEN "Numer" and phone will show that's unlocked now !
or
Switch ON your phone with a not Allowed SIM Card,
Enter the Unlock Code we send to you.
KenwoodModel : All KenwoodSwitch ON your phone with a not Accepted SIM Card,
Enter the Unlock Code we send to you.
LG ElectronicsModel : LG KU990 Viewtyinsert original sim card and turn phone on.
Press telephone icon at bottom of screen to bring up the phone keypad
Enter 2945#*990#
A menu will pop up, select sim unlock
Enter your unlock code and press ok
The phone will then reboot and the unlock is complete.
Model : LG CU400Insert SIM Card from a unsupported network provider,
Power on the handset,
Phone will display "Invalid SmartChip"
In Idle screen, enter : 159753#*#
Phone will display "Enter NCK, Remaining 5"
Enter the 8 digit SIM Unlock code
Select "OK"
The handset is now successfully unlocked
Model : LG U8150Switch ON your phone with a NOT Allowed SIM Card,
Compose : 2, 7, 7, 6, 3, 4, #, *, #,
Go to menu "SIM Lock",
Enter the Unlock Code we send to you.
Model : LG U400Insert the network SIM in the handset which has given u the LG U400.
Enter 2945#*88110#.
The phone will then prompt 'Unlock sim'. Press OK.
The phone will then prompt 'Network Unlock'. Press OK.
The phone will then prompt- 'Input Network Control Key'.
Enter the 8 digit unlocking code. Press OK. If the unlocking code comes with only 7 digits, add a 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digit code.
It should give you the message Success.
Come back to the main screen and Enter 2945#*88110#.
The phone will then prompt unlock sim. Press OK.
The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code.
Then press OK
Model : All other modelSwitch ON your phone with an Allowed SIM Card,
Then compose :
2945#*5101# - (if you have a LG 510w)
1945#*5101# - (if you have a LG 1200 &B1200)
2945#*5221# - (if you have a LG 5200 &52200)
2945#*5301# - (if you have a LG 5300)
2945#*5401# - (if you have a LG 5400)
2945#*70001# - (if you have a LG 7020)
2945#*7101# - (if you have a LG 7100)
2945#*1201# or 2945#*70001# - (if you have a LG 1100)
2945#*70001# - (if you have a LG7250T)
2945#*2201# - (if you have a LG C2200)
2945#*5301# - (if you have a LG T5100)
2945#*3311# - (if you have a LG C3310)
Go to "Menu" and then to "Settings",
Then select "Security",
To finish select "Network Provider" and select "Desactivate"
Enter the Unlock Code we send to you.
Model : To ClassifyFor the next models u must to insert the original SIM:
LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KE970 press 2945#*9701#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KG290 press 2945#*7101#
LG KG800 press 2945#*7101#
LG KU250 press 2945#*250#
LG KU380 press 2945#*380#
After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.
For next models insert one SIM ,not the original SIM:
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
Enter NCK and press OK. MitsubishiModel : Trium MarsSwith ON your phone without SIM Card,
Press * and without release compose : 787090 or 787292,
The menu "Unlock Network" will appear,
Select "YES" and enter the Unlock we send to you.
Model : Mitsubishi M341iSwith ON your phone with an Accepted SIM Card,
Press * and without release compose : 787292,
The menu "Unlock Network" will appear,
Select "YES" and enter the Unlock we send to you.
Model : Mitsubishi M342iSwith ON your phone with an Accepted SIM Card,
Press * and without release compose : 787090,
The menu "Unlock Network" will appear,
Select "YES" and enter the Unlock we send to you.
Model : All MitsubishiSwitch ON your phone without SIM Card,
Press * and without release compose : 787292 or 78729,
The menu "Unlock Network" will appear,
Select "YES" and enter the Unlock we send to you.
MotorolaModel : All MotorolaSwitch ON your phone with a not allowed SIM Card,
Phone show "Enter Special Code",
You can now enter the Unlock Code we send to you.
WARNING : If one of theses messages appear :
- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'
It's because you or somebody allready enter too many wrong codes, you just have to let phone ON on theses errors messages and after 40 min to 2 hours maximum the message "Enter Code Special" will appear again ! Model : Motorola A1000 and other A modelsClick on the icon Phone
Enter the following keys: ** 057 *
Mobile displays "locking enter personalization"
Enter the unlock code
Click Ok
Model : Motorola L6i &L7i (not L6 and L7 without "i")Press and hold "*" key by dialing code 787090
The mobile displays: "Menu. Network"
Choose 'yes' and then press OK
The mobile ask you for code
Enter the code for unlocking.
NECModel : Nec N342iSwitch ON your phone without SIM Card,
Compose : **00012*CODE#.
Model : All others NECSwitch ON your phone without SIM Card,
Compose : #7320*CODE#.
Model : old NECSwitch ON your phone without SIM Card,
Compose : #3210*CODE# and press Call Button.
NokiaModel : All NokiaSwitch ON your phone without SIM Card,
Compose #PW+CODE+1#
The letter P appear after press 3 times quickly the button star ( * )
The letter W appear after press 4 times quickly the button star ( * )
The letter + appear after press 2 times quickly the button star ( * )
The phone show "SIM Restriction Off" and was unlocked !
PanasonicModel : Panasonic GD67/68 & GD87/8 & x70 & P341iSwitch ON your phone without SIM Card,
Compose : 746 and press 2 times the button "OK",
A new menu will appear, select "NCK",
You can now enter the Unlock Code we send to you.
Mode : Panasonic G60Switch ON your Phone with a not allowed Accepted SIM Card
Enter your PIN Code and Confirm
Press a second time on OK button
The phone now ask for Unlock Code !
Model : Panasonic GD50 &GD55Switch ON your phone without SIM Card,
Compose : **00012*CODE#.
Model : Panasonic X60 &X400Switch ON your phone with an Accepted SIM Card,
Compose : 52824**,
A new menu will appear, select "NCK",
You can now enter the Unlock Code we send to you.
or
Switch ON your phone with an Accepted SIM Card,
Compose : 52824**,
Compose : 746 and press 2 times the button "OK",
A new menu will appear, select "NCK",
You can now enter the Unlock Code we send to you.
Model : Panasonic X100Switch ON your phone with an Accepted SIM Card,
Compose : #*7465625*638*CODE#
PhilipsModel : All PhilipsSwitch ON your phone with a not Accepted SIM Card,
Phone ask for "Enter NCK",
You can now enter the Unlock Code we send to you.
SagemModel : Sagem My-S7Switch ON your phone without SIM Card,
Compose : *#*#CODE# and press "Call" button.
Model : My 700x and 600xPut an accepted SIM card
Press "MENU" then stay pressed on " * "
Select " sim lock "
Tape your 10 digits Code, and the phone shows "Done" Model : All SagemSwitch ON your phone with a not Allowed SIM Card,
Phone will show "SIM VERROU"
You can now enter the Unlock Code we send to you.
WARNING : if your mobile show "CODE POSTE" it's because you have a Security Code, can be 0000 or 1234 but we can't calculate this code with your IMEI because it's not code from Phone but code from the User of the Phone !
FAQ :
Question: My phone isn't asking for code ?
Answer: You will see a count down, wait for it to finish, then phone will asks for code.
SamsungModel : Samsung Z105 &Z107Switch ON your phone with a not Accepted SIM Card,
Compose : #7465625*638*CODE#
Model : All others SamsungSwitch ON your phone with a not Accepted SIM Card,
Phone will ask for "Password",
You can now enter the Unlock Code we send to you.
OR (if phone show "Insert Correct SIM Card")
Switch ON your phone with a not Accepted SIM Card,
Compose : #0111*CODE#
BlackJack i607 (Cingular blackjack )Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted
NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
Power on your Phone
Enter *#1546792*#
Select Option 3 Network &Call Settings
Select option 5 Network Mode
Select GSM
This should resolve your problem. SanyoModel : All SanyoSwitch ON your phone with a not Allowed SIM Card,
Enter the Unlock Code we send to you.
SendoModel : <h5>Switch ON your phone with a not allowed SIM Card,
Message "Enter NCK" will appear,
You can now enter the Unlock Code we send to you.
SharpModel : All SharpFrom front screen type *01763*6371#
The handset will reset back to the main screen
Press M button.
Scroll to Settings and press SELECT.
Scroll to Security and press SELECT.
Scroll to MEP locks and press SELECT.
Enter your Handset Code (the default code is 0000) and press OK.
Scroll to Network and press SELECT.
Scroll to Deactivate and press SELECT.
Enter Unlock Code we send to you and press OK.
Handset should then display DONE and be unlocked.
SiemensModel : All SiemensSwitch ON your phone with a not Allowed SIM Card,
Compose : *#0000*CODE#
or
Switch ON your phone with a not Allowed SIM Card,
Compose : *#0001*CODE#
SonyModel : All SonySwitch ON your phone without SIM Card,
Compose : *#7465625*12*CODE#.
ToshibaModel : All ToshibaSwitch ON your phone with a not Accepted SIM Card,
Enter the Unlock Code we send to you.
OR
Insert Non Vodafone SIM into the handset and power on.
The display will show Enter Network Unlock Code.
Enter **00012* then 47369761 followed by #, then press the centre menu key.
The display will now show Done.
Switch the phone off and on. The phone will now be unlocked
Model : TS803Insert Non Vodafone SIM into the handset and power on.
The display will show SIM Error. This SIM card cannot be used
Press the centre menu key for 3-4 seconds. The display will show Enter Code
Enter unlock code
The handset will then reboot itself. Once completed, the handset will be unlocked
TreoModel : Treo 180 &270Switch ON your phone without SIM Card,
Compose : *#*#CODE#
Model : Treo 600Switch ON your phone with Allowed SIM Card,
Go to Menu and select "Phone Tool" or "Phone Application"
Type on Virtual Keyboard *#*#CODE#
Select with PEN "Numer" and phone will show that's unlocked now !
or
Switch ON your phone with a not Allowed SIM Card,
Enter the Unlock Code we send to you.
TriumModel : Trium MarsSwith ON your phone without SIM Card,
Press * and without release compose : 787090 or 787292,
The menu "Unlock Network" will appear,
Select "YES" and enter the Unlock we send to you.
Model : Mitsubishi M341iSwith ON your phone with an Accepted SIM Card,
Press * and without release compose : 787292,
The menu "Unlock Network" will appear,
Select "YES" and enter the Unlock we send to you.
Model : Mitsubishi M342iSwith ON your phone with an Accepted SIM Card,
Press * and without release compose : 787090,
The menu "Unlock Network" will appear,
Select "YES" and enter the Unlock we send to you.
Model : All MitsubishiSwitch ON your phone without SIM Card,
Press * and without release compose : 787292 or 78729,
The menu "Unlock Network" will appear,
Select "YES" and enter the Unlock we send to you.
SonyEricssonModel : All SonyEricssonSwitch ON your phone without SIM Card,
Press 1 time the left arrow,
Press 2 times the button * ,
Press 1 time the left arrow,
The message "Personalize with MNC2" will appear,
You can now enter the Unlock Code we send to you.
If your phone have a "JOGDIAL" (ex : SonyEricsson K700i) you must press "down arrow" instead of "left arrow" for step 2 &3. We mean by "Down Arrow" to direct the Jogdial down ! VitelModel : All VitelSwitch ON your phone with a not allowed SIM Card,
Enter the Unlock Code we send to you.
Model: TSM7Switch ON your phone without SIM Card,
Enter the Code ##**9987,
The phone now ask for Unlock Code.
VK MobileModel : VK530Switch the handset ON without SIM Card - screen will display Insert Card.
Compose : *#83*737# (press and hold # for 1 sec) - this will give access to the personalisation menu
Select Disable Personalisation
Type Unlock Code we send to you and press the ok button
Handset should now be unlocked
WonuModel : All WonuSwitch ON your phone with a not Allowed SIM Card,
Enter the Unlock Code we send to you
SPVModel : All SPVSwitch ON mobile with a not Allowed SIM Card,
Enter Unlock Code we send to you.
Model : SPV C500Switch ON mobile with a not Allowed SIM Card,
The message "PUK2" appear,
Enter the Unlock Code we send to you.
Phone ASK for New Code PIN enter : 0000
Confirm and compose : 0000**
Click "Finish" and phone will show "Network is locked..."
Enter the Unlock Code we send to you and click "Finish"
Restart the Mobile who is Unlocked !
Cingular BlackJackInsert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted
NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
Power on your Phone
Enter *#1546792*#
Select Option 3 Network &Call Settings
Select option 5 Network Mode
Select GSM
This should resolve your problem.
Copyright 2007-2008, UnlockByLogs.com
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks