...:: UCT Box Video Tutorials ::...
Printable View
...:: UCT Box Video Tutorials ::...
...::How To Read Info::...
...::How To Format::...
...::How To Write Flash::...
...::How To Solve Project ID Not Found::...
Easy Instructions on "How to Upgrade UCT Box Firmware"
- To Update the Box Firmware, download the latest setup from the support area and install it.
- Go to "Start", "All Programs", "UCT Team". Open the "UCT Firmware Update x.xx". (If you dont have icons in your programs menu, then u can go to "C:\UCT|\UCT Firmware Update" folder and start from there)
- Press "ScanPort" and then select the box comm port in the "Setup Port" list.
- Now press "UpGrade-BOX". If all is well then your box will be upgraded with latest firmware in few seconds.
Important:
- Please make you dont connect any phone while the UCT Box is being updgraded.
- Dont power off the PC or diconnect box while the Box is being upgraded.
- Even if something goes wrong, then let the upgrade bar complete and then do anything else.
Br.
Naman
Easy instructions on: How to Full Erase a Flash Chip of a MTK as well as a SPD Handset
First, most important, why do we need to full erase?
Sometimes writting flash files to chinese phones is a big problem. even if u got everything ok, it might give error at some percentage. sometimes stuck at 10%, sometimes stuck at 15%. As per my personal experience, Full erasing has always been usefull before flashing. Either that be chinese phones or be nokia phones :)
Step-by-Step Guide on how to erase full flash of your chinese handset:
- Read the Information of the handset (Also read full flash backup of handset in case u need it in future)
- At the bottom of the information read, you can notice how much size is your flash chip. like in our example SpreadTrum handset, its 64mb
- Now select "Format", Uncheck "Auto Format"
- Enter the hex size "0x04000000" in the "Size" field, (Leave the Start field as it is)
- Press Start and your phone will be full erased in few seconds.
Now most important is to put correct size for formatting.
Depending on your flash size you need to enter the correct format size, the details are as follows:
- If your handset Flash is 8mb, then enter format size = 0x00800000 for Full Erase
- If your handset Flash is 16mb, then enter format size = 0x01000000 for Full Erase
- If your handset Flash is 32mb, then enter format size = 0x02000000 for Full Erase
- If your handset Flash is 64mb, then enter format size = 0x04000000 for Full Erase
-----------------------------------------------------------------------------------------
To Prove this, we also made a simple test. We read the flash before formatting a handset.
Now when this readed flash file is opened in a hex editing software we see this:
But after formatting the handset with size "0x04000000" and reading the flash file again. What we see now in Hex editing software is this:
How to Self Check the UCT Box Hardware
UCT Fusion Software allows to test the UCT and ET-Plus hardware for any technichal problems such as corrupt firmware, bad voltages, low voltages, pinfinder problem or any other small hardware issues.
To Self-Check the UCT hardware:
- Disconnect the 24 pin main cable and the handset from UCT Box.
- Open the latest software for UCT Fusion.
- Press the Self-check button in the side bar.
- Now a small window for self checking will pop-up, press Self-check and wait for the test to complete.
- After test the software will show you the results for each and every test.
You can now make screenshot of these results and send it to your reseller in case of any problem. This will help in solving the problem with your UCT hardware if u have any.
Tutorial: How to Find the 2nd Pinouts of MTK handset with 2 CPU
Some MTK based handsets have 2 CPUs inside them. Now when we find the pinouts of this type of a handset with a normal procedure, then we are only able to connect to the first CPU. So we can repair only yhe part of the handset which the first CPU is related to.
To fix the second CPU of the same handset, we need to find the pinout of CPU 2 and connect to it. This can now be done with UCT Fusion Software.
Steps to find pinouts of CPU 2 of MTK handset:
- Connect the handset to the UCT Box and open the latest version of the Fusion software.
- Press "Scan" from the side bar and select "MTK"
- Now press 2nd Definition and after that keep press the power button on the handset, just like u do for any other MTK based handset.
- In few seconds the UCT Fusion software will detect the pinouts for 2nd CPU and define them.
You can now open the UCT Box Software, select MTK, uncheck Auto Sense and proceed with Flash / Format / IMEI Repair, etc. If you will not uncheck Auto Sense then UCT Box will again find the 1st CPU pinouts rather than the 2nd CPU.
how to read flash with uct
Tutorial: Fix "Conjuction Box" error while UpGrading firmware of UCT Box
http://www.youtube.com/watch?v=qINmv4hncXc