Share & Request Uct Box Readed Flash Files Here

[shaiksha85]

Model : LEPHONE U-505
CPU Type : SPD CPU:SC6600L2 Flash: NOR_ST_M30L0T7000T0



Complete Read Info:

Initializing...
 DA_LIB_VER_3.6.0.0
 It is sensing the pinout fast...
 D-=2  D+=3
 Searching commport...please wait...
 Connecting...
 Spd USB-to-Serial=COM6
 Connected...sending boot...
 FDL test...OK
 ArmBootMode: 6600700100005A00_01
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 115200 ok
 Reading phone HW info...
 Read info is done.
 CPU: SC6600L2      Flash: NOR_ST_M30L0T7000T0
 setting the Flash Parameters...
 Settings have been completed!
 Reading FileSystem info...
 File System Ver: 0A
 IMEI 1=354254042719752
 IMEI 2=354254043019756
 --------NOR_FLASH_CONFIG--------
 Flash Bank count=16
 EFS sector count=7
 File sector count=0
 Sector size=0x00020000
 Flash start addr=0x00000000
 Flash size=0x01000000
 Fix NV addr=0x00EE0000
 Product information addr=0x00FE0000
 MMI resource addr=0x00900000
 ------Auto Format Address-------
 Start=0x00F00000
 Size =0x000E0000
 Read FS info...done

LEPHONE U-505 SPD Flash File For UCT

[shaiksha85]

Model : Rocker R8000
CPU Type : MTK6253
Project ID: KAAM5091E_PDA_ROCKER_1.01.218


Complete Read Info:

Initializing...
 DA_LIB_VER_3.6.0.0
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=10  TXD=3
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6253,    HardwareVer:8A00,    SoftwareVer:8A02
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 00EC240400000000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: KAAM5091E_PDA_ROCKER_1.01.218

Rocker R8000 Flash File For UCT

[shaiksha85]

Model : Welcome Q900
CPU Type : SPD CPU: SC6600L7 Flash: NOR_MX29GL640E_H_L



Complete Read Info:

Initializing...
 DA_LIB_VER_3.6.0.0
 It is sensing the pinout fast...
 D-=2  D+=3
 Searching commport...please wait...
 Connecting...
 Spd USB-to-Serial=COM6
 Connected...sending boot...
 FDL test...OK
 ArmBootMode: 6600700900025A00_01
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 115200 ok
 Reading phone HW info...
 Read info is done.
 CPU: SC6600L7      Flash: NOR_MX29GL640E_H_L
 setting the Flash Parameters...
 Settings have been completed!
 Reading FileSystem info...
 File System Ver: 0A
 IMEI 1=352539000348731
 IMEI 2=352539000348732   
 Read FS info...done

Welcome Q900 SPD Flash File For UCT

[Mubarak Alam]

plz upload micromax ez pad q3 flashing file

[shaiksha85]

micromax q3 flash file

plz upload micromax ez pad q3 flashing file

micromax q3 flash file

[shaiksha85]

Model : MAXX mx128i
CPU Type : MTK6223
Project ID: CB128I.08A.MT23D.F8.C1.V01


Complete Read Info:

Initializing...
 DA_LIB_VER_3.6.0.0
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=3  TXD=7
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6223,    HardwareVer:8A08,    SoftwareVer:8A00
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 00EC240200000000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: CB128I.08A.MT23D.F8.C1.V01

MAXX mx128i Flash File

[shaiksha85]

Model : NOKIA E72
CPU Type : SPD CPU: SC6600L2 Flash:NOR_EN71GL064



Complete Read Info:

Initializing...
 DA_LIB_VER_3.6.0.0
 It is sensing the pinout fast...
 D-=8  D+=9
 Searching commport...please wait...
 Connecting...
 Connected...sending boot...
 Spd USB-to-Serial=COM6
 FDL test...OK
 ArmBootMode: 6600700100025A00_01
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 921600 ok
 Reading phone HW info...
 Read info is done.
 CPU: SC6600L2      Flash: NOR_EN71GL064
 setting the Flash Parameters...
 Settings have been completed!
 Reading FileSystem info...
 File System Ver: 0A
 IMEI 1=353378032183451   
 IMEI 2=353378032183552  
 --------NOR_FLASH_CONFIG--------
 Flash Bank count=1
 EFS sector count=5
 File sector count=0
 Sector size=0x00010000
 Flash start addr=0x00000000
 Flash size=0x00800000
 Fix NV addr=0x00790000
 Product information addr=0x007F0000
 MMI resource addr=0x00590000
 ------Auto Format Address-------
 Start=0x007A0000
 Size =0x00050000
 Read FS info...done

NOKIA E72 SPD Flash File For UCT

[shaiksha85]

Model : yxtel z66
CPU Type : MTK6252
Project ID: G915GR082SSM110705


Complete Read Info:

Initializing...
 DA_LIB_VER_3.6.0.0
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=6  TXD=5
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6252,    HardwareVer:8B00,    SoftwareVer:CA05
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 00C2002500370000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: G915GR082SSM110705
 Changing baudrate to 921600...
 Done.

YXTEL z66 Flash File For UCT

[shaiksha85]

Model : AKAI NINJA
CPU Type : MTK6223
Project ID: F05H-FT3-MUL1_F05V01.01b03


Complete Read Info:

Initializing...
 DA_LIB_VER_3.6.0.0
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=7  TXD=9
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6223,    HardwareVer:8A08,    SoftwareVer:8A00
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 007F227E220A2201
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: F05H-FT3-MUL1_F05V01.01b03
 Changing baudrate to 921600...
 Done.

AKAI NINJA Flash File For UCT

[shaiksha85]

fly MP600 Flash File
Model : fly MP600
CPU Type : MTK6226
Project ID: MP600_FLY-I_LEN_211_070709_LY3_OV1Z_SS75_CTF


Complete Read Info:

Initializing...
 DA_LIB_VER_3.6.0.0
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=7  TXD=5
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6226,    HardwareVer:8B02,    SoftwareVer:8B01
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 00EC257E25082501
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: MP600_FLY-I_LEN_211_070709_LY3_OV1Z_SS75_CTF

fly MP600 Flash File For UCT

[shaiksha85]

Model : Karbonn K334*
CPU Type : MTK6252
Project ID: ZL65PF02_00A9_V1_0_2


Complete Read Info:

Initializing...
 DA_LIB_VER_3.6.0.0
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=9  TXD=7
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6252,    HardwareVer:8B00,    SoftwareVer:CA04
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 00C2002500370000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: ZL65PF02_00A9_V1_0_2
 Changing baudrate to 921600...
 Done.

Karbonn K334* Flash File For UCT

[shaiksha85]

Model : Karbonn K406
CPU Type : MTK6253
Project ID: ZL109A_02B0_V1_0_3


Complete Read Info:

Initializing...
 DA_LIB_VER_3.6.0.0
 It is sensing the pinout fast,please hold on the phone Power key
 RXD=9  TXD=7
 Connecting...Please hold on the POWER key until the red gauge is going...
 Any errors please select another boot and try again.
 BB:6253,    HardwareVer:8A00,    SoftwareVer:8A02
 Loading boot...
 INT_SYSRAM_BOOT test completed.
 Loading boot...
 Boot2 test completed.
 Nor Flash ID: 00EC240400000000
 Nand Flash ID: 0000000000000000
 Read Hardware Information is done.
 Config EMI(Nor Flash only)...
 H/W detection ok.
 Get Project ID from phone...
 Project ID: ZL109A_02B0_V1_0_3

Karbonn K406 Flash File For UCT

[mdakhan]

Model : Forme X1
CPU Type : SPD SC6600L7


Complete Read Info:
Code:
Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM25
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 230400 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_M36C0W6050T0
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=910584102221449
IMEI 2=910584102221464
--------NOR_FLASH_CONFIG--------
Flash Bank count=4587595
EFS sector count=0
File sector count=0
Sector size=0x00000000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x00000000
Product information addr=0x00760000
MMI resource addr=0x0000002B
------Auto Format Address-------
Start=0x00000000
Size =0x00760000
Read FS info...done

Forme X1 SPD Flash File For UCT
pleas give me file
__________________

[shaiksha85]

Model : Forme X1
CPU Type : SPD SC6600L7
CPU: SC6600L7 Flash: NOR_M36C0W6050T0

Forme X1 SPD Flash File For UCT
pleas give me file
__________________

Check Here Already Posted
http://www.gsmindia.in/forum/207396-post98.html

[mdakhan]

Model : Forme X1
CPU Type : SPD SC6600L7


Complete Read Info:

Initializing...
 DA_LIB_VER_3.4.1.2
 It is sensing the pinout fast...
 D-=2  D+=3
 Searching commport...please wait...
 Connecting...
 Spd USB-to-Serial=COM25
 Connected...sending boot...
 FDL test...OK
 ArmBootMode: 6600700900025A00_01
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 230400 ok
 Reading phone HW info...
 Read info is done.
 CPU: SC6600L7      Flash: NOR_M36C0W6050T0
 setting the Flash Parameters...
 Settings have been completed!
 Reading FileSystem info...
 File System Ver: 0A
 IMEI 1=910584102221449
 IMEI 2=910584102221464
 --------NOR_FLASH_CONFIG--------
 Flash Bank count=4587595
 EFS sector count=0
 File sector count=0
 Sector size=0x00000000
 Flash start addr=0x00000000
 Flash size=0x00800000
 Fix NV addr=0x00000000
 Product information addr=0x00760000
 MMI resource addr=0x0000002B
 ------Auto Format Address-------
 Start=0x00000000
 Size =0x00760000
 Read FS info...done

Forme X1 SPD Flash File For UCT

maine is file se mera forme x1 flash kiya lekin white display aa raha hai
aur is kin bakup file se flash karta ho to forme par stop rehta hai

pls give me file

read log here

Initializing...
DA_LIB_VER_3.6.0.0
It is sensing the pinout fast...
RXD=4 TXD=22
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_M36C0W6050T0
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=910584100512161
IMEI 2=910584100512187
--------NOR_FLASH_CONFIG--------
Flash Bank count=6291456
EFS sector count=503365635
File sector count=3145728
Sector size=0x00000000
Flash start addr=0x00000000
Flash size=0x00000000
Fix NV addr=0x00000000
Product information addr=0x00000000
MMI resource addr=0x00000000
------Auto Format Address-------
Start=0x00000000
Size =0x00400000
Read FS info...done