Fenix Accounts for SE Unlocking Available Instant with UnlockByLogs.com Server



05 Phones Account : 250 Logs x 20 Euro Each = 100 Logs ( 100 Euro )

10 Phones Account : 500 Logs x 18 Euro Each = 180 Logs ( 180 Euro )

Instant Account Activation






Supported Phones

Z310, D750, K310, K320, K510, K530, K550, K550im, K600, K608, K610, K610im, K618, K750, K758, K770, K790, K800, K810, K850, K880, M600, P1, P910, P990, S500, T650, V600, V630, V640, V800, V802, W200, W300, W550, W580, W600, W610, W660, W700, W710, W800, W810, W830, W850, W880, W888, W900, W910, W950, Z310, Z520, Z530, Z550, Z610, Z710, Z750, Z800

It means that you phone will be unlocked forever, whether you flash it with SEUS or Davinci software or any other tool.
We can unlock ANY db2020 phone with ANY CID inside from ANY network including CID52, CID53 !
Price is 20 credits per one phone unlock.

Requirements:

the latest client software
standard DCU60 or DCU65 usb cable


Manual:
Preparation:

Download and extract phone and USB flash drivers from hereDownload
Switch on the mobile
Plug in the USB cable and your computer will find NEW hardware
Install the drivers as per the tutorial here :
Unplug the USB cable from the mobile
RESTART PC before installing the USB Flash drivers
After Restart install USB Flash drivers by takeing out battery and then put it in again and then press C when plugging cable.
Unplug the cable, remove and insert the battery back

Unlock Step 1:
Start client.exe (of course ensure you have purchased credits before hand - )
Whilst pressing "C" plug the USB (or holding 2 in case of W880)
Mobile authentication starts ..
Then you get a screen to choose service choose Unlock Step 1
A DVL file is generated and sent directly to the system and then you have to wait between 1 min to max.24h (all depend by how many pcs is in server, because is calculated one by one)
You can check unlock status here: http://www.gsmunlock.eu

Unlock Step 2:
When you get the email that your MAP is ready (or you see MAP READY status at CIS webpage)
Make sure the mobile is switched off
Start client.exe
Holding C plug the cable into the mobile (or holding 2 in case of W880)
When you get the services screen, scroll down and in bold red you will see the next step to unlock - press it
Then it will tell you to take out cable and switch on the mobile, take out battery, put it back in, and then switch it on and choose "Normal Mode", then plug in the USB Cable, ignore if it Says incorrect SIM
It will continue the process and soon enough you are ready
If the process somehow hangs, remove cable, shut down the client. Then turn the phone on (it will have Insert Correct SIM Card message), run client again, connect the cable to powered phone. Select CSCA Activation script from the list of scripts.


B.R.,
UnlockByLogs Team