need help (7610 flashing)

[fani_cm]

--------------------------------------------------------------------------------

MY NOKIA 7610 SHOWS CONTACT RETAILER. IT SHOWS EVERY THING OK IN UFS BUT STILL THE SAME PROBLEM. BUT IN JAF IT SHOWS
" Failed! Aborting!...MCUVER " IN THE LAST LINE .
SCREEN SHOTS IS HERE.


JAF

MCU: D:\Program Files\Nokia\Phoenix\Products\RH-51\RH51_52_67_68PE706420.C1
Booting phone...
MCU ID: 0x1081
BOOT file: D:\Program Files\ODEON\JAF\Flash\w3_2nd.fia
Loader version: 04.40.00 -> Revision: 0007
Boot size is 0x10A8
Boot is ready...
FLASH ID0: EC00E822 -> ST Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
FLASH ID1: EC00E822 -> ST Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
FLASH ID2: EC005022 -> ST Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
FLASH ID3: 00000100 -> NOT USED Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Flash ID is 0x22E800EC
Flash loader is D:\Program Files\ODEON\JAF\Flash\w3_amd.fia
Loader version: 04.40.00 -> Revision: 0007
Loader size is 0x7EA8; Loader chk: 54
Loader is ready...
P-key nokia module version 01.00
MSID: 84B7CA1563A32FB56CFDA861F6
MSID decoded: 3E4EBAF70010F74DA9000000
FAID: 0AEBEEA541C7406BEFD47B4E
Operation took 0 minutes 28 seconds...
Erasing...
Found 4 interval(s) to erase
Erasing area: 00000000 - 0000FFFF...
Erasing area: 00010000 - 00FFFFFF...
Erasing area: 02000000 - 0287FFFF...
Erasing area: 02FC0000 - 02FEFFFF...
Operation took 2 minutes 52 seconds...
Writing...
Perm. Data Restore OK
Operation took 3 minutes 20 seconds...
Restarting MCU...
PPM: D:\Program Files\Nokia\Phoenix\Products\RH-51\RH51PE706420.02
Booting phone...
MCU ID: 0x1081
BOOT file: D:\Program Files\ODEON\JAF\Flash\w3_2nd.fia
Loader version: 04.40.00 -> Revision: 0007
Boot size is 0x10A8
Boot is ready...
FLASH ID0: EC00E822 -> ST Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
FLASH ID1: EC00E822 -> ST Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 10
FLASH ID2: EC005022 -> ST Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 10
FLASH ID3: 00000100 -> NOT USED Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
First 16 bytes: C6 00 00 EA 75 01 00 EA 78 01 00 EA 7B 01 00 EA
Flash ID is 0x22E800EC
Flash loader is D:\Program Files\ODEON\JAF\Flash\w3_amd.fia
Loader version: 04.40.00 -> Revision: 0007
Loader size is 0x7EA8; Loader chk: 54
Loader is ready...
P-key nokia module version 01.00
MSID: 84B7CA1563A32FB56CFDA861F6
MSID decoded: 3E4EBAF70010F74DA9000000
FAID: 0AEBEEA541C7406BEFD47B4E
Operation took 0 minutes 29 seconds...
Erasing PPM...
Found 2 interval(s) to erase
Erasing area: 00000000 - 0000FFFF...
Erasing area: 02A00000 - 02C9FFFF...
Operation took 0 minutes 18 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 22 seconds...
Restarting MCU...
Flashing Done!
Operation took 7 minutes 56 seconds...
After flash processing...
Waiting for phone to boot...
Reading...
Failed! Aborting!...MCUVER

I WANT TO SOLVE THE PROBLE. IF ANY ONE HAVE SOLLUTION PL SHARE...

THANKS IN ADVANCE....

[smilegsm]

dear format phone bay hand or jaf thats bi ok

[fani_cm]

boss i have checked it by three key formaiting and by jaf also but still sam problm

[richard_wifi]

bro..full erase ur nokia 7610 after backup rpl..later full flash ur phone.do not disconnect...than format ur phone..if still contact retailer..use 3 key formating..post result..

[fani_cm]

thanks boss i,ve got it