s5830 flashing done with z3x support

[sajee]

s5830 flashing done with z3x support

when you try if you got this error on z3x

Setup connection... OK
Sending mibib... OK
Sending qcsbl... OK
Sending oemsbl... OK
Sending amss... OK
Sending arm11boot... OK
Sending boot... OK
Sending recovery... OK
Sending system... Error
Done with Samsung Tool ver 12.7

Don't worry here is tutorial for flash you set...

Download file from z3z support (S5830XEKPP.zip i was use this file)

Download Samsung S5830 Galaxy Ace Downloader

add files following order....

Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830 xxxxxxxx
Click Phone button and select: MODEM_S5830xxxxxxxx
Click PDA button and select: CODE_S5830xxxxxxxx
Click CSC button select: CSC_S5830xxxxxxx

put your phone download mode - Press middle Key ( OK key ) + Power + Volume Down

connect cable... program will get your your comport

press start button... flashing will start...........


don't do any think till reboot your device.....



flashing done with z3x support

[yuganta]

how to select the file

[jamesjerss]

how to select the file

if yu hav single flash file in odin multi downloader check one package nd select the file into one package.

if yu hav multi file


Run Samsung S5830 Galaxy Ace Downloader.
Select OPS file : Cooper_v1.0.ops in his field.
Click BOOT button and select: APBOOT_S5830xxxxx_xxx...._user_low_true.tar.md5
Click Phone button and select: MODEM_S5830xxxxx_xxx...._REV03.tar.md5
Click PDA button and select: CODE_S5830xxxxx_xxx...._REV03_user_low_true.tar.md 5
Click CSC button and select: CSC_S5830xxxxxx_xxx......_REV03_user_low_true.tar. md5
Put your phone into Download Mode: Press middle Key ( OK key ) + Power + Volume Down
Connect USB cable to your phone and the program must read the Com number it takes.
Click Start button and the update process will start.
Do not touch or remove anything till the device rebooted and you can see PASS word on the program.