I-PHONE/I-PAD Hardware tested solutions
I-PHONE/I-PAD Hardware tested solutions
Last edited by GSMKERALA; 29-03-2011 at 10:00 PM.
touch screen crack/broken done for replace-I-PAD
if your iphone also meet following problems?????
Following problems, you need replace your whole screen.
1. The surface was damaged when the screen come under the strong tremble or extrusion.
2. LCD leak the liquid
3. A part or All touch screen can not work
Following problems may cause the logic board no working. If can not be repaired, you need replace your logic board.
1. Very strong trembling
2. Water come in
3. The time is too long when you charge up your iphone
4. The important IC on board had been aged
Fault shows: No signal , No WiFi and Bluetooth, Can't load in system, The iphone close automatically when pull out charger
Following problems need replace Audio-module
1. No sound from earphone, Single track
2. On/off key was failure, No trembling
Following problems, need replace flex tail line
1. Can not electricize
2. Can not link your computer
3. Home buttom key no working , and so on .....
The problems come from headphones, no sound or unclear. you need replace headphone
Following problems, need replace induction line
1. No sound
2. Unclear
3. iPhone can't close LCD automatically when you call
Following problems, need replace battery
1. Water come in
2. No charge or undercharger
And also following problems, you need repair it ..
A). When net signal or WiFi signal was unstable. you need change antenna patch.
B). When loudspeaker no sound or sound was decrescent suddenly. you need replace your speaker.
C). Receiving can't listen the sound from iphone. or the sound is too pindling, you need replace microphone.
D.) iPhone take pictures unclearly, color screen or no display. you need replace the camera.
E). If SIM card tray was losed, please buy a new
F). Under outside power was damaged your iphone, maybe need replace Home key
Test 3G LCD & touch screen.
1. Test machine
2. 3G LCD
3. 3G touch screen
4. 3G headphon jack
5. 3G Logic board
6. Voltage is 3.5 ~3.7 V
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks