BB5 RPL_SIM_Lock, Config key:0000000000 Solution

[dilipnachna]

BB5 RPL_SIM_Lock, Config key:0000000000 Solution

1. How to make RPL from PM then repair by it sim lock data ? ( And here I speak about PM of your phone that you've created it from non-flashing phone with firmware is protected).
2. To use this property must have a cyclone Box . { But Today I will give it for you FREE without this box } .
3. Creat RPL from Locked PM .

Download program from here--http://www.ziddu.com/download/680611...psoni.rar.html

How to use program ? :

* Click on RPL ( SIMLOCK_ BY _SHORBAGY.exe ) for 5 seconds then click on ( Crack.exe ) . The Options will activated .
* Go to botton DCT4/WD2/BB5 then press security then press creat RPL from PM .
* Choose pm file you need to make it RPL then press creat RPL from PM .


* Now you can write rpl with any box and now sim lock now repaired .

Thanks to MR.PROTEC
Best Regards,
dilipsoni
http://www.ziddu.com/download/680611...psoni.rar.html
password: jai-hind

[dilipnachna]

F.A.Q About BB5 Contact Retailer Locked For All Provider & RPL WRITE.
There Is No Full And Perfect Way To Solve But This Can Help To Solve...
Info About Contact Retailer In BB5 & SP Area Damaged & RPL Write Phone.

Few Things You Have To See Before Repair.

1 Phone IMEI Is Damaged Or Not? F.E 123456789012345

2 Phone Sp Area Is Damaged Or Not? F.E Config key -FFFFFFFFFFFFFF & PROVIDER - unknown

3 Bb Self Test You Can Do With Service Option.
Security Test
Simlock Test

4 What Can We Do If IMEI Is Damaged?
A.Simple And Easy Way To Repair Is If You Don't Have Backup. Calculate Bb5 Ask 2 Rpl And Write It.
B.Free Way Is Downgrade Phone Then Check. If IMEI And Sp Area Still Damage Update Back And Use Ask 2 Rpl.

5 What If We Have Sp Area Damaged? (F.E Configkey –FFFFFFFFFFFFF & PROVIDER - unknown )
A. Simple And Easy Way Is If You Have Backup Of Pm 308(Eeprom In Hex 134) Restore It With Write Pm. Remove Phone Insert Battery And Plug Again And Test Phone.
B. If You Don't Have Backup Just Use Bb5 Ask 2 Rpl To Repair It.

6 What If I Have Backup Rpl And Not Have Pm Backup?
A. Backup Rpl Is For Certificate To Repair Or Restore. So In This You Can Restore IMEI Of Phone But You Can't Restore Sp Area.F.E Configkey –FFFFFFFFFFFFF & PROVIDER - unknown

7 What If I Have Backup Pm And Don't Have Rpl?
A. You Can Restore Or Repair Sp Area But U Can't Restore Or Repair Phone IMEI (Certificate) With Only Pm You Need Rpl Backup Or CALCULATED RPL ONLY WAY.

8 Can I Restore Rpl With Usb Cable?
A. No You Can't Write Rpl (Certificate) Via Usb Because Its Need Active Flash Mode.

9 What I Do After Rpl Write Still Contact Retailer?
A.Most Phone Need To Rewrite Pm Field [1] And [309] For Writing This Fields Pm File You Have To Do SX4 With Supported Tools Then Do Fast Do Not Restart Or Off Phone Before Writing Pm File.
B.Most Phone Can Repair With Downgrade And Write Rpl Then SX4 Write Pm To See If Same Then Update Back Then See If Solved Or Not.

10 How To Get This Pm Section?
A.Read Any Working Phone Pm 1 To 512.Save To Pc.Open It To Notepad And Remove Field - [308] From It Save Again...Now U Can Us It.
Note That If U Forget To Remove 308field From That Pm Before Writing U Get Damaged Sp Area Phone After Writing This Pm.
B.You Can Also Use Only Pm Field - [1] And Field - [309] Also.

11 Can I Use Any Firmware Pm To Any Firmware?
A. Some Phone Have Security Check For Rf Value.So Test If Not Work U Need Correct Version Pm.

12 What If Still Have Problem Contact Retailer?
A.Do Self Test And Check St Security Test Is Failed Or Not?If Yes Then Read Post Again.If No Then Read B And C
B.If Self Test Pass Then Do Factory Default And After That Do File System Format .
C. As I Think Its Possible From Hardware Also So Check Hardware Section For More Help.. As I Think From My Side [Retu Ic] Responsible.

[sajee]

thanxxxxxxxxxxx but link not working bro

[dpimani]

link not working bro

[KUMARAKOM]

link not working brother...pls upload

[dilipnachna]

link is working


http://www.ziddu.com/download/680611...psoni.rar.html

[sajee]

ITS SHOWING THIS ER


Working on PM...
Configuration Key - Found
Failed to Create RPL From PM -> PM Problem - 2

[sajee]

MY N96

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 0000000000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0

HELP ME SIR

[dilipnachna]

MY N96

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 0000000000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0

HELP ME SIR

u need 0-120 area of p.m. file. see picture below and file

[sajee]

its showing pm problerm

wt can i do sir

[dilipnachna]

its showing pm problerm

wt can i do sir

i think problem with ur pm file. read 0-120 area of p.m. and convert. it is 100% tested.by me. read pm with different type of box like ufs .uv. mt .jaf .mx-key and try again.

[sajee]

i think problem with ur pm file. read 0-120 area of p.m. and convert. it is 100% tested.by me. read pm with different type of box like ufs .uv. mt .jaf .mx-key and try again.

give me the tutorial 4 my jaf or ufs.............. its big help 4 me sir..............

thanxxxxxxxxxxxxxxxxxx

[GUDDU]

how to write mx-key bb5 rpl help me

[sajee]

my5130c

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 0000000000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0



need yr help sir

[waqas]

my5130c

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 0000000000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0



need yr help sir

i mean your phone is on ???