SuperDCT4 Free for EVERY Cyclone Box User
SuperDCT4 Free for EVERY Cyclone Box User
Hi, new firmware for Cyclone Box was just uploaded at our server.
What's new?
- BB MEP-24660-003 added
- BB MEP-34870-001 added
- BB MEP-39371-001 added
- BB MEP-40488-002 added
- BB MEP-40954-001 added
- BB MEP-41468-001 added
- XGold1 ASC Flashing Booting issues solved
- Minor changes and bugfixes
This is server-side update only.
Upgrade your box using "Box Maintenance".
Best Regards & Stay Tuned,
Cyclone Box Team
Hi, this is server-side update only, upgrade your box using Box Maintenance.
What's new?
- MEP-31845-002 - added
- MEP-41261-001 - added
- MEP-42517-001 - added
- MEP-08589-001 - fixed NCK length
- Changed default SX4 Emulation Serial Number due to blacklist by Nokia in latest PA_SD. Now SX4 serial is calculated using box unique OTP Area, so quite randomfull and further blacklist not possible too.
- Minor Changes and bugfixes
Best regards N Stay Tuned,
Cyclone Team
Hi, new firmware for Cyclone Box is ready.
Signature: Cyclone Nokia/Blackberry Application v01.71, (Sep 11 2011 17:49:29, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
What's new ?
- MEP-04104-008 added
- MEP-42490-002 added
- Optimizations in TX2 data shifting
- Fixed problems with resuming device from Static (sleep) mode on some configurations
- Fixed some variants of JCOP31 handling
- Minor changes and bugfixes
This is server-side update only, just do Box Maintenance and your box will be updated. Keep note that new major installer is still not ready yet (many internal changes related to engine, etc), however it should be ready within next week, so be prepared
Best Regards,
Cyclone Team
Hi, new update for Cyclone Box BlackBerry Module is ready.
Added support for following MEPs:
MEP-06041-012
MEP-06041-013
MEP-14074-004
MEP-29080-003
MEP-34870-002
NOTE
Just update your box using Box Maintenance. Each box having 3 update credits.
Still alot more to come so stay tune
Hi, new firmware for Cyclone Box is just uploaded at server.
What's new?
- MEP-10129-006 added
- MEP-04626-001 fixed length
- MEP-06529-001 fixed length
- MEP-06529-002 fixed length
- MEP-06530-001 fixed length
- MEP-06530-002 fixed length
- MEP-07321-002 fixed length
- MEP-07723-001 fixed length
- MEP-08881-001 fixed length
- MEP-08882-001 fixed length
- MEP-09292-001 fixed length
- MEP-10073-001 fixed length
- MEP-18601-001 fixed length
- MEP-19877-001 fixed length
- MEP-24660-001 fixed length
- MEP-30218-001 fixed length
Update your box using box maintenance.
Hi, new firmware for Cyclone Box is just uploaded at server.
Added support for Blackberry MEP-29318-002.
Hi, latest bomb for Cyclone Box is ready
Update is 100% free and standalone for CycloneBox users;-)
- Added FIRST IN THE WORLD, FREE, STANDALONE SL3 UNLOCK by BF FOR LATEST TI BASED NOKIA PRODUCTS (RAPUV2 CPU) this includes Nokia 500, Nokia 600, Nokia 700, Nokia 701 and probably more coming !!!!!! These products are 15 NCK chars so not to worry.
- Added FIRST IN THE WORLD, FREE, STANDALONE SUPERDONGLE REPAIR for RAPUv2 Based Phones
- Added FIRST IN THE WORLD, FREE, STANDALONE SX4 AUTHORIZATION for RAPUv2 Based Phones
- Added FIRST IN THE WORLD, FREE, STANDALONE "FULL RPL" BACKUP (include SUPERDONGLE) for latest RAPUv2 phones
- Added FIRST IN THE WORLD, FREE, STANADLONE DOWNGRADE CAPABILITY for latest RAPUv2 phones
- Added FIRST IN THE WORLD, FREE, STANDALONE Full Security analysis for RAPUv2 phones
- Supported interfaces: USB and FBUS
- Small bug fixes, i.e. PM protection is now unticked by default
Nokia 701, reading sl3 log file
Nk701 detailed security analysis[Nokia USB Phonet]: Port opened OK!
Reading SL3 LOG File...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 79u_11w31.4
MCU Date 16-08-11
Product RM-774 (Nokia 701)
Manufacturer (c) Nokia
IMEI 358272040230347
Mastercode 752474040
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
WARNING: "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C000 4AAC " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 3BC33C8B
CMT Ready!
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.16.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC006000000032, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.07 (C) 2011 KarwosLabs
Custom loader running OK! Working...
If phone doesn't powering into Local Mode now for some reason do following:
1. Re-insert battery
2. Power it on, when asked use Ovi/Pc Suite Mode
Readed OK, Saving to "EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C000 4AAC "
Success!
Nk 701, full RPLStarted Phone Security Analysis...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 79u_11w31.4
MCU Date 16-08-11
Product RM-774 (Nokia 701)
Manufacturer (c) Nokia
IMEI 358272040230347
Mastercode 752474040
Reading Security Block...
Security block OK and saved to "RM-774_358272040230347_2011-10-04_022815.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
"EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C000 4AAC " Exists, That is good...
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!
Standalone SX4 operationRPL Creation started...
Processing CMT Part...
[Nokia USB Phonet]: Port opened OK!
Storing Product Code...
Storing PSN...
Storing HWID...
Trying to store Simlock...
Reading Configuration Key...
Hashing...
Reading SHA1-RSA Signature...
Reading SHA1-HMAC Signature...
Storing Simlock...
Trying to store WMDRM RPL...
Reading Keys...
Storing WMDRM PD...
Reading Security Block...
Security block OK and saved to "RM-774_358272040230347_2011-10-04_022831.SecurityBlock.PM"
"EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C000 4AAC " Exists, That is good...
Storing Additional Data...
Checking Superdongle Key...
Encrypting Superdongle Key...
Storing Superdongle Key...
Checking CMLA Key...
Storing CMLA Key...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 3BC33C8B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.24.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC006000000032, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0060 (Samsung), Size: 1024MBytes, VPP: Not Supported
RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.24.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: FEB3BB7481D3E5D0EAC907335A4402A071493D53
APE Subsystem Not Found
Storing NPC...
Storing CCC...
Storing HWC...
CMT VARIANT Not Found
Storing PARTNERC...
Restarting MCU...
RPL Saved OK
At least firmware 1.74 needed (update isn't needed at all).SX4 Authorization / SD Repair Procedure Started....
[Nokia USB Phonet]: Port opened OK!
"EC130000FFFF7C40D88E7ED917D36D2FC8DAFF43.C000 4AAC " Exists, That is good...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 79u_11w31.4
MCU Date 16-08-11
Product RM-774 (Nokia 701)
Manufacturer (c) Nokia
IMEI 358272040230347
Mastercode 752474040
Reading Security Block...
Security block OK and saved to "RM-774_358272040230347_2011-10-04_022851.SecurityBlock.PM"
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button
Copying our loaders will affect in cracks/clones in market shortly and maybe Broadcom Unlocking business destroy.
Don't forget to have installed latest v1.16 installer (http://www.karwos.hk/CycloneBoxInstaller.exe), so Autoupdate module will do the job.
Hi, new update is released.
- Added PA_SIMLOC30 Original Nokia RPL Write support in SIMLOCK2 format
- The NCK length is now automatically recognized upon RPL write, so correct NCK array lenght might be assumed
- Minor changes and bugfixes
Autoupdate should do the job, in case of any problems (or interrupted update) you can manually download exe from http://www.karwos.hk/updater/Cyclone.exe and place in C:\Program Files\Cyclone Box\
Hi, new firmware v01.78 was just loaded at server.
What's new?
- Added support for Blackberry MEP-06041-016, WORLD'S FIRST
- Added support for Blackberry MEP-42490-001, WORLD'S FIRST
Upgrade your box using Box Maintenance and Enjoy ;-)
CycloneBox Firmware 01.79 Firmware is Ready on server
Added Latest BlackBerry Security Mep
-MEP-06041-017 (Worlds First)
Update your Box from Maintenance tool
PS
We know that you guys are waiting for something ,So we will be back again in few hours
Stay Tune
Hi, new update for Cyclone Box is ready.
Added support for reading Unique Data files for Broadcom 21351 based Nokia Phones (X2, C3, .. and more of them).
After read Unique Data you can:
- Unlock SP locks by reading LBF data
- Backup FULL RPL (including superdonlge) 100% Nokia-Like
- Repair corrupted Superdongle keys
- Authorize your phone with SX4 emulation inside box
- Detailed Security Analysis
- Downgrade this phones
- More ...
X2 Example Uni Data read and Security operation
PS1: Server connection and 10 credits (with 100 credits threshold) required to perform Broadcom Uni Data dump.Code:Started Phone Security Analysis... [Nokia X2-00 USB Phonet]: Port opened OK! MCU Version V 04.90 MCU Date 28-09-10 Product RM-618 (Nokia X2-00) Manufacturer (c) Nokia IMEI 352699049966024 Mastercode 554352325 Reading Security Block... Security block OK and saved to "RM-618_352699049966024_2011-11-12_132245.SecurityBlock.PM" Step 1 : Testing SIMLOCK SIMLOCK SEFLTEST PASSED OK! Step 2 : Testing SECURITY SECURITY SEFLTEST PASSED OK! Step 3 : Analyzing Security Block WARNING: "48400406073ECC4443B83B4151F972ABA08B3D66.C0003160 " Not Exists, Will read it... Reading CYC file from phone... Booting CMT... [Nokia X2-00 USB Phonet]: Port opened OK! Switching to RAW Mode... [Nokia USB Flashing Generic]: Port opened OK! New ROM Detected CMT_SYSTEM_ASIC_ID: 000000000000000022000509200C0000 CMT_EM_ASIC_ID: 00005361 CMT_PUBLIC_ID: 48400406073ECC4443B83B4151F972ABA08B3D66 CMT_ASIC_MODE_ID: 00 CMT_ROOT_KEY_HASH: 1B0D74C532CA1C6133940C740E8C786E CMT_BOOT_ROM_CRC: DE56D582 CMT_SECURE_ROM_CRC: BDDE7A3A CMT Ready! BCM21351_usb2nd.fg, Type: 2nd Boot Loader, Rev: 513.11.24.0, Algo: BB5 Using NEW BB5 FLASHING PROTOCOL Transmission Mode Requested: Control USB, Accepted: Control USB FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC FlashChip[0,CMT]: 0x0020003000000131, ST, NOR FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR FlashChip[0,CMT]: 0x0020003000000131, ST, ONENAND Requested Algorithm: XSR 1.6 (CMT) Sending Auxiliary Loader... Auxiliary Loader Sent! Loader: RAPxx CommonBoot v1.07 (C) 2011 KarwosLabs Custom loader running OK! Working... Cyclone Server (1.0.0.676), Cyclone Box Team 2008-2011 - Ready. If phone doesn't powering into Local Mode now for some reason do following: 1. Re-insert battery 2. Power it on, when asked use Ovi/Pc Suite Mode Readed OK, Saving to "48400406073ECC4443B83B4151F972ABA08B3D66.C0003160 " Checking SUPERDONGLE... SUPERDONGLE FOUND AND CHECKSUM OK! PASSED! Checking SIMLOCK... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Checking MCU&DSP TIMESTAMPS... MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED! Checking CMLA KEYS... Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?) Checking ECC KEYS... ECC KEYS FOUND AND CHECKSUM OK! PASSED! Checking DIV KEYS... DIV KEYS FOUND AND CHECKSUM OK! PASSED! Analyze finished!
PS2: After reading uni data, all operations is standalone (just likely previous basing upon cached data)
PS3: Server charged credits, but my phone got disconnected during hash read operation, and hash not readen. What to do, what to do? If your account has been charged, the data generated at server are cached too... That means you can repeat process again (previously charging battery, i.e.), server transaction will be succeeded and no credits charged.
Box firmware v01.82 is required to use this update.
Software and loaders should be automatically updated.
In case if you have aborted your update process, and now having problem with running app - you can download http://www.karwos.hk/updater/Cyclone.exe and place it in your Cyclone directory...
Broadcom Unlocking (via LBF Hash Read)/SX4 Authorization/SD Repair/etc is now fully FREE and STANDALONE, just simply as previous models.
No internet connection and credits needed.
Just to remind Cyclone is one box which support all of hashes free and standalone now, this includes reading data from RAP3Gv3, RAP3Gv4, RAPUv1, RAPUv21 (world's first), Broadcom, XGold1, and shortly from XGold2 (maybe free, maybe with credits, we'll decide).
No firmware upgrade is needed. Just run Cyclone and it will auto-update main exe + loaders.
Make sure you have latest installer installed, if not, grab one from http://www.karwos.hk/CycloneBoxInstaller.exe
Firmware required, v01.82 (from Nov 12), no upgrade needed if u have one already.
=====================
Installer v1.17
20.12.2011
=====================
- SE Xperia Unlocker introduced (this is 3rd party addon)
Supported Phones :
Xperia X10 Mini - E10i
Xperia X10 Mini Pro - U20
Xperia X8 - E15i
Xperia W8 - E16 - E16i
Xperia X10
Xperia X10i
Xperia X10a
Docomo SO-01B
All These Phones supported without TEST POINT
- Added Real time SE Xperia Unlocker account Creator in 'Credits' tool.
(This is the best option for Online web shop resellers as Addon works without Box)Reseller can generate accounts real time with box)
10 Cyclone credits = 1 Xperia phone log
- BB5 FBUS/USB Loaders v11.40.00 Introduced
- Introduced previous updates (standalone and free Broadcom unlocking, RAPUv21, etc)
- PM Protection is now unticked by default
- PM Protection is automatically unticked during SX4 operations
- Full Erase for New Protocol APE phones fixed (wrong CMT Flash Device Index selected)
-Added New bright skin
- Minor changes and Bugfixes
Download Links
http://www.karwos.hk/CycloneBoxInstaller.exe
Multiupload.com - upload your files to multiple file hosting sites!
Hi, new firmware is uploaded to server, no need download nothing, just upgrade your box by "box maintenance"
Added two world's first MEPs:
MEP-09917-003
MEP-46976-002
Enjoy Cyclonebox,
more to come,
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks