** Cyclone fixed Installer v1.06 (DCT4) **

After update i can't unlock any phone

Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.37, (Apr 22 2010 23:09:11, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2010 wk16
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C0003658
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk40
Initializing security card...
Card Serial Number: DA000078
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5,00v PASSED
MCU Voltage 3,28v PASSED
Core Voltage 1,77v PASSED
VBAT Voltage 1,37v PASSED
VBAT Voltage 5,01v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,90v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
External Box VPP Enabled
VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
MCU Version V 5.91
MCU Date 27-03-09
Product RH-105
Manufacturer (c) NMP
IMEI 358250034382647
Mastercode 2152534263
IMEI Spare 3A85520043836204
IMEI SV 3385520043836274F0000000
PPM V 5.91, 27-03-09, RH-105, (c) NMP, AE
PSN DPS667721
Product Code 0565793
Module Code 0203486
Basic Product Code 0582128
PSD 0000000D00000000
HW 1621
UEM 1328
UPP 2292
RFIC 0700
DSP ICPR62_08w31_UPP
LCD SDI:NAXv89, S6B33BD
ADSP Sw p&V 5.91\n27-03-09\nRH-105\n(c) NMP\nae
Failed to read info -> Failed to read SP info
MCU Version V 5.91
MCU Date 27-03-09
Product RH-105
Manufacturer (c) NMP
IMEI 358250034382647
Mastercode 2152534263
Proceeding with RSA Unlock...
Warning: Failed to read SP Info, Assuming defaults
Warning: Failed to read SP Info, Assuming defaults
Warning: Failed to read SP Info, Assuming defaults
Failed to Unlock DCT4 Plus -> Initial SP corrupted or Baseband5 phone detected

How i can do ?