CycloneBox Installer v1.16 (Black Edition)


New BB5 FBUS/USB Loaders v11.24.00 Introduced
Added Dead USB Flashing for RAPIDO and other FUR-over-USB operations (DO NOT USE FOR CERTIFICATE READ/WRITE!), still *quot;old method*quot; avaiable in connection tab.
Certificates operations for Rapido FBUS-OVER-USB disabled, because is not supported by loaders ( it will fail without any attempt )
Rapido Alive FUR-over-USB flashing not supported, flash those phones by Dead variant instead (Switch to RAW mode problem in this models..), or *quot;Old USB Flashing Method*quot;
*quot;Use OLD USB FLASHING METHOD*quot; moved to BB5/Flashing tab
*quot;Settings*quot; tab renamed to Connection
TX2 settings removed from BB5 Flashing Tab
RAPU Flashing/Booting Improved
C2-02 XGold2 Flashing *quot;Added*quot; Cyclone has flashing compatibilty for this model, but MassMemory file couldn't be handled becasue too big. Fixed.
BB5 Mass Memory Flashing Tested Cyclone SW has this posibility from long time ago...
Added *quot;Read Unique Data*quot; button. Use to boot phone by Flashbus directly, and dump Unique Data (for Simlock,SD,...) when phone doesn't have correct BSI resistors value. Dumped unique data might be lately used for USB operations if still FBUS operations fails.
Old DCT4 Asic 2,5,6,7 Direct Unlock/Relock/Autolock Introduced, finally
Standalone DCT4 RPL Calculation Introduced, supported Asics: 2,5,6,7,11
Added support for DCT4 (7250i, 6610i, 2125i, 2865i, 6275i) Product Data RPL Entity Writing for fixing CS
Added support for generating extended DCT4 RPL with Product Data for above models (CS problems)
Alcatel Calculator added to gui
PMM Protection Checkbox added upon PM write. Use to protect PM security fields.
Diagnostic Module Added
Selftests moved to new *quot;Diagnostic*quot; module
Vibra Tests Added
Backlight Tests Added
*quot;Autodetect*quot; added for DCT4 Unlocking. Unique method non ASIC dependand (i.e. avoids RM-189 2310 problems avaiable on all boxes right now). If there is problems with autodetection user still can select unlocking method manually.
Removed DCT4 ASK-RPL From Credits Manager
Removed SuperDCT4 Activation from Credits Manager
StatusBar messages are more accurate now
Added *quot;Auto-Rebuild IMEI*quot; checkbox for *quot;Read UEM IMEI*quot; function. Used to automatically generate FLASH IMEI DATA and programm it one-click REPAIR ??????????????4.
CacheV2 Introduced
XGold1/2 Flashing Routines rewritten to be more memory effective
Dead-erased XGold2 flashing improved, plus added some messages regarding to reviving dead XG2
USB Connection Type is now selected automatically when XGold2 platform found
The supported MEP List are now acquired from box once Blackberry Tool launch
Moved UEM stuff to new *quot;ASK/RPL Tool*quot;
XGold2 MassMemory flashing added
Remaining XGold Credits are now shown upon launching of Nokia Tool (Those one used for XGold1 LBF, Blackberry Codes Service, etc)
Default Security Area XGold Service count increased from 50 to 100 (100 phones limit between SA updates for Blackerry,XGold1,...)
XGold/Blackberry service is now also checked upon Blackberry tool startup, also after each Code calculation remaining Calculation Limit is displayed
Relock files updated for DCT4
AutoUpdater Introduced
USB Flashing Solved due to wrongly installed Flashing Cable Drivers on some configurations (i.e. Virgin PC)
Database Unlock Introduced
RPL Write revised
PARTNERC certificate support added for Certificate Read
PARTNERC certificate support added for Certificate Write
PARTNERC certificate support addef for RPL Operations
Erase files support added
DCC configuration for NIMMIIIIRRFF06150000 added
DCC configuration for NIMMIIIIRRFF095A1F05 added
DCC configuration for NIMMIIIIRRFF095A1F04 added
DCC configuration for NI00IIIIRR0306150018 added
DCC configuration for NIMMIIIIRRFF095B1F05 added
DCC configuration for NIMMIIIIRRFF0102F201 added
DCC configuration for ISL2TI0200000103B840 added
DCC configuration for 8600030001040A021001 added
DCC configuration for 860003000104094B2F01 added
DCC configuration for 86000300010401035424 added
DCC configuration for NI00BC000003095B1F00 added
DCC configuration for NI00BC0000030102F203 added
DCC configuration for NI00BC0000030102F202 added
DCC configuration for NI00BC000003095B1F05 added
DCC configuration for NI00BC000003095B1F01 added
DCC configuration for NI00IIIIRR030C213402 added
DCC configuration for NI00IIIIRR030C213401 added
DCC configuration for NI00IIIIRR030C20C605 added
DCC configuration for NI00IIIIRR03094B2F01 added
DCC configuration for NI00IIIIRR0301022E05 added
DCC configuration for NI00IIIIRR0301022E01 added
DCC configuration for NIMMIIIIRRFF0C206C02 added
DCC configuration for NI00IIIIRR0301035602 added
DCC configuration for NI00CS0000040C213402 added
DCC configuration for NI00CS00000401022E05 added
DCC configuration for NI00BC0000040F03F802 added
DCC configuration for NI00BC0000040A4E2000 added
DCC configuration for NI00BC000004095B1F01 added
DCC configuration for NI00BC000004095B1F00 added
DCC configuration for NI00BC0000040103B904 added
DCC configuration for NI00BC0000040102F201 added
DCC configuration for NI00BC00000401022C00 added
DCC configuration for 0A4E2007 added
DCC configuration for 0103B904 added
SX4 Virgin PMs database updated, added RM-256, RM-497, RM-528V, RM-584, RM-586, RM-609, RM-612, RM-626, RM-638, RM-707, RM-712
HWC/CCC Templates added for products RM-469, RM-540, RM-566, RM-528V, RM-596, RM-609, RM-614, RM-645
Models.ini refreshed
Skin Stack Updated
Previous updates included
Nokia Connectivity Cable Drivers updated to v7.1.42.0
Box Firmware v01.73 Released


Afterwards DCT4 Erase All chips, the Permanent Data aren't restored anymore
Fixed DCT4 RPL Write problem when only DATA2 exists in RPL file
Fixed problems with handling RAPIDO *gt; v11.16.00 loaders over FBUS (FUR control Add Problem)
Check flashing Bus for WD2 fixed
Read UEM Imei for WD2 Fixed
Read ASK for WD2 Fixed
Write RPL for WD2 Fixed
Fixed lots of Access Violatios after closing up Nokia Tool
Fixed bug with disappearing Tray icon after Minimize to Tray
Bruteforce between NCK Fixed
PM Write bugs fixed (Access Violation)
Fixed bug with Broadcom Read Info
Fixed spurious XGold2 product to be displayed in XGold1/DCT4 tab
Fixed product mismatch on XG1/XG2 autodetection
Fixed invalid Calculation of Mastercode
6230 Flashing Fixed (Given Image not maches with readen UPP Id or Image problem). If problem still exists select all flashing files _MANUALLY_ don't use INI based (because there exists two HW versions E and M autoselection is HWID based and may fails anytime).
OMAP Loaders Fixed
Fixed some wrong FBUS implementation when Packet size mod 0x78 == 0