QMOBILE (E400) Successfully repaired By infinity box

[jumper-master]

PAKISTANI QMOBILE (E400) Successfully repaired By infinity box

--------------------------------------------------------------------------------

HELLO

Today i have a set QMOBILE (E400) manufactured by PAKISTAN i want to repair it i check in infinity box shell not supported yet,i search in fourm and google there is nothing about, i open handset to see cpu type,it is mt6225 type than i format/rebuild imei with infinity box,here i post log general information,detail information,format log and rebuild imei 1st and 2nd log.


GENERAL INFORMATION


Action: read/check information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6225, E05
Hardware version: TINNO25_GEMINI_HW
Software version: E400-PK.FM.V7"
Software date: 2006.06.14
Barcode: L2710922009039 10
imei-1: 3578**********
imei-2: 3578**********
imei-3: 3578**********
Finished, time used: 6 sec
Remove/Install battery now !



DETAILED INFORMATION



COM4 [VCP0] selected
module v3.05
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check information
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7E03:0003
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #02 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #03 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
detecting chip #01 in region #00...
flash: 98000300000001:18E59F00000000
flash: Toshiba AMD/Fujitsu std [T 0008x004000 007Fx020000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: 2nd [standard] generation
TCL-ID is absent
rom info detection finished
====================
New firmware detected (v.3.05, database date: 11.01.2010):
TINNO25_GEMINI_PCB01_GPRS_MT6225_S00.E400-PK_FM_V7.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info ver: 04
sw version: TINNO25_GEMINI_PCB01_GPRS_MT6225_S00.E400-PK_FM_V7.BIN
project-id: E400-PK.FM.V7, 00000000
code offset: 00000000
ffs offset/size [01]: 00E00000/001F0000
rom info structure: 2nd [standard] generation
TCL-ID is absent
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
standard ffs/eeprom offset confirmed: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detecting ffs/eeprom structure pass 1...
.......................
detect standard ffs/eeprom location pass #1...
.................................................
detect standard ffs/eeprom offset pass #1...
ffs/eeprom record offset detected
detect standard ffs/eeprom data...
ffs/eeprom record size detected
ffs/eeprom layout detection complete
ffs/eeprom detected ok: element #1
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
detecting firmware version...
firmware version: TINNO25_GEMINI_PCB01_GPRS_MT6225_S00.E400-PK_FM_V7.BIN
detecting firmware build...
.................................................
firmware build: 200905262227
detecting product-id...
.................................................. ..............
done
detecting languages...
.............................................
language parameters detected
detected languages: En Ar
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Finished, time used: 2 min 20 sec
Remove/Install battery now !


FORMAT IN SAFE MODE




COM4 [VCP0] selected
module v3.05
Action: reset settings ("format ffs")
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:7E03:0003
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: E400-PK.FM.V7
Version: TINNO25_GEMINI_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 35783102101528
connection Ok
building list...
done
items to clear: 177
warning: wrong packet cs
warning: wrong packet cs
items cleared: 177 of 177
building list...
done
items remains: 0
Finished, time used: 32 sec
Remove/Install battery now !

"REPAIR IMEI"


IMEI 1
Action: "repair imei"
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-1: 357831021015281
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei-1: 357831021052813
verification Ok
Finished, time used: 5 sec
Remove/Install battery now !

IMEI 2
Action: "repair imei"
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-2: 135790246811220
imei write method: mode-1
imei write channel: imei #2 for dual sim/mono CPU
new imei-2: 357831021052839
verification Ok
Finished, time used: 3 sec
Remove/Install battery now !


Now i want to say infinty team please update your shell and add this support.

THANK YOU

:::::::::::::INFINTY IS THE BEST::::::::::::::